Wayne 1/4 HP Non-Clogging Vortex, Reinforced Thermoplastic Submersible Utility Pump-VIP25 - The Home Depot


Model # VIP25

Internet # 100000054

1/4 HP Non-Clogging Vortex, Reinforced Thermoplastic Submersible Utility Pump

Wayne 1/4 HP Non-Clogging Vortex, Reinforced Thermoplastic Submersible Utility Pump

This item has been discontinued.
The Home Depot no longer carries this specific product.

$75.98 / each


Model # VIP25

Internet # 100000054

The WAYNE 1/4 HP Submersible Utility Pump can pump 1,020 GPH at a 10 ft. lift, emptying a problem area in seconds. It pumps up to 1,800 GPH at a 0 ft. lift. This pump features corrosion-resistant, reinforced thermoplastic motor housing, volute and impeller.

  • Pumps up to 1800 GPH at 0 ft.
  • Bottom suction design filters debris and removes water down to 1/4 in. of surface
  • Non-clogging vortex impeller design, passes up to 1/2 in. solids
  • Bottom suction design filters debris and removes water down to ¼ in. of surface
  • 1-1/4 in. nps discharge connects to flexible sump discharge hose for high volume water removal
  • ¾ in. adjustable discharge adapter connects to standard garden hose
  • Corrosion-resistant reinforced thermoplastic housing, volute and impeller
  • High performance 1/4 hp motor
  • Easy-access handle for portability
  • UL Listed

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Assembled Depth (in.)  6.8 in  Assembled Height (in.)  11 in 
Assembled Width (in.)  6.8 in  Maximum Pumping Height (ft.)  18 
Product Depth (in.)  7.7 in  Product Height (in.)  11.4 in 
Product Width (in.)  7.3 in 
Adjustable Speed  No  Amperage (amps)  6.2 
Cord Length (ft.)  Corrosion Resistant  Yes 
Discharge Flow @ 0 ft. (gallons/hour)  1800  Discharge Flow @ 10 ft. (gallons/hour)  1020 
Float Switch  No  Hardware Included  No 
Head Pressure (ft.)  18  Horsepower (hp)  1/4 hp 
Housing Material  Thermoplastic  Inlet Connection  Threaded male 
Maximum Discharge Flow (gallons/hour)  1800  Maximum Working Temperature (F)  120 
Minimum working temperature (F)  40  Outlet Connection  Threaded male 
Pool Cover Pump  No  Power Type  Electric 
Power Type Required  AC  Product Weight (lb.)  6.8 lb 
Pump Switch Type  Switchless  Returnable  90-Day 
Run-Dry Capable  No  Self-Priming  Yes 
Submersible  Yes  Voltage (volts)  120 
Waterfall Pump  No 
Warranty / Certifications
Certifications and Listings  1-UL Listed,SSPMA Certified  Manufacturer Warranty  1 Year Limited Warranty 


Rated 4.3 out of 5 by 24 reviewers.
Rated 3.0 out of 5.0 by must start in 2 5/8" of water I bought this after our basement flooded 3x in March. All the specs and outside of the box tout its ability to suck up water down to 1/4" deep. That is true. What is not clear, until you take it out the box, is that is has to start in water that is at least 2 5/8" deep! There is a sticker on the side stating the minimum water depth. Why not mention that on the box or product specs anywhere? Since I bought it to such up very shallow water I have not been able to test it other than a few seconds in a bucket to see if it works at all. I am going to see if I can construct a ring to place around it to get it primed when starting. If they had mentioned the fact that it needs deep water to get started I would have bought something else. July 9, 2010
Rated 5.0 out of 5.0 by No complaints Good quiet pump. The 90 degree garden hose adapter has an o-ring seal so you can position it left, right, straight up or anywhere in between. Without the adapter, there is a 1¼" female NPT threaded connection. January 29, 2015
Rated 4.0 out of 5.0 by Works finw I used this pump to winterize my SeaDoo's last week. Worked as expected. October 28, 2014
Rated 5.0 out of 5.0 by Great value and easy to install. I found this pump an excellent value and easy to install for my application. Before purchasing this pump, my home in Florida had significant water damage from a tropical storm. In addition, I had drainage problems from runoff on the sidewalks and patios near the house. To help solve the drainage problem, I sunk a 5 gallon plastic pail into the ground at the low spot, put the pump in the pail, plugged it in to a switched outside outlet, and covered the top of the pail with screen and pond stones. Now, when it rains hard, I occasionally run the pump as necessary to drain the pail and keep water away from the house foundation. The pump drains the pail in less that a minute, and I repeat the procedure as needed. A low cost, reliable solution. August 21, 2012
Rated 5.0 out of 5.0 by Tough Pump I bought this to supplement the one I bought 21 years ago. This is the same pump. The old one is still working after all those years and heavy punishing use. It sits in my pool cover all winter and despite freezing and thawing many times it works like a charm. Even leaves and debris don't phase it. At 1/4 HP it can take a long time to drain flooded pool cover but no other product does the job like this one. It serves my purposes. I don't know what you want it for but if you need a tough long lasting product this fits the bill. April 30, 2011
2 3 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.