Model # 7782300

Internet #203077385

Store SKU #283697

Westinghouse 3-Light Brushed Nickel Ceiling Fan Light Kit
0030721778230

Westinghouse

3-Light Brushed Nickel Ceiling Fan Light Kit

$27.97 /each
Color/Finish: Brushed Nickel
  • Antique Brass
  • Brushed Nickel
  • Oil Rubbed Bronze
  • Polished Brass
  • White

Frequently Bought Together

Product Overview

This traditional Westinghouse 3-Light Ceiling Fan Light is an ideal choice for replacing worn or outdated fan light fixtures. The elegant brushed nickel finish complements three frosted ribbed glass shades, which allow for bright, even light. The kit's traditional look goes well with a variety of common ceiling fan styles. The light kit measures 7 in. x 12-3/4 in. (H x W). It is compatible with most standard 42 in. to 52 in. ceiling fans with a center hole in the housing cap, so you can easily replace or refresh worn or dated fan light fixtures. It includes 3 medium-base Energy Star CFL Mini-Twist light bulbs, 9-watt maximum. Product reference number 77823.

  • Traditional brushed nickel finish and white schoolhouse shade lend elegance to a space
  • Compatible with most standard 42 in. to 52 in. ceiling fans with a center hole in the housing cap
  • Uses 3 medium-base Energy Star CFL Mini-Twist light bulbs, 9W maximum, included
  • On/off pull chain enables manual light operation
  • Note: product may vary by store
  • Need it installed? Choose from certified Pros to complete your job by calling 1-855-723-2266

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can this light fixture be used to replace an existing ceiling fan?

Asked by: Netty
i have a black deer valley ceiling fan and the light fixture is too dim.I would light to replace the light kit.would your light kits fit the existing ceiling fan?
Answered by: MAD
Date published: 2017-01-22

what size is the bulb base? (intermediate or regular)

Asked by: quilter1
Regular
Answered by: RetiredinAtlanta
Date published: 2016-12-10

I don't like CFL bulbs. May I use incandescent or LED bulbs in place of 9W CFL's?

Asked by: JoJo
You can ALWAYS replace a CFL bulb with an LED bulb of the same light output. You can only replace a CFL with an incandescent if the socket and wiring are rated for the wattage.
Answered by: TheAce
Date published: 2016-09-01

Will this ceiling fan light kit fit the Hampton Bay Landmark model which did not have a light assembly originally.

Asked by: Peach
I believe so, I have installed light fixtures in other Hampton Bay fans with no problem.
Answered by: Ly
Date published: 2016-02-11
  • y_2017, m_2, d_20, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_50
  • loc_, sid_203077385, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

3-Light Brushed Nickel Ceiling Fan Light Kit is rated 4.2 out of 5 by 161.
Rated 5 out of 5 by from Very easy to install, offers a lot of light when 60w LED's are used. The swap took less than 30 m... Very easy to install, offers a lot of light when 60w LED's are used. The swap took less than 30 minutes. My ancient fan uses the same center-threaded light attachment, so it was straight-forward. I simply unbolted the cover above the old kit, untwisted the old wires, screwed the old kit off & new kit on, fed and connected the newly stripped wires, then re-attached the cover plate. Flip the breaker and done! I liked that the shrouds are actually heavy glass, not plastic. The only problem is the antique brass color wasn't as yellow as mine, but you can't tell. Either you're blinded when looking at it or in the dark!
Date published: 2016-12-02
Rated 1 out of 5 by from Material used are not good quality. Made from thin sheet metal. Thus screw thread are messed up ... Material used are not good quality. Made from thin sheet metal. Thus screw thread are messed up already so that screw will not even come out. For the cover only two screws are used not standard three. This will definitely cause problem during installation. For the three glass shades only six screws included, instead of nine required. So what will hold the third shade or you are supposed to use only two screws per shade even though three are required for each shade. Item will be returned after wasting lot of time. Purchaser should use own diligence.
Date published: 2016-12-27
Rated 2 out of 5 by from Easy install, bad switch I've been holding on to this kit for several months and only now got to installing it, so no returns possible. I installed it which was way easier than Hampton Bay. If you are installing this in a Westinghouse fan, you just remove the fan control housing, plug this one in, secure them together, and you're good. Unfortunately, the little pull string switch in my lighting kit isn't functioning. I checked voltage and continuity through the simple system to the switch. I'm going to try to exchange it. I'm sure this won't happen again.
Date published: 2016-09-18
Rated 4 out of 5 by from Very easy to install on old Casablanca fans,don't over tighten screws for globes,tied string from... Very easy to install on old Casablanca fans,don't over tighten screws for globes,tied string from light to blade to hold while wiring up,put electrical tape around base to fan to install two mounting screws,just made it easy to install.item great but store sucks as I ordered another for ship to store,but they would not do it since store showed inventory on hand,store could not find them,said for me to ship at home and pay postage,went to another HD and they went out of their way to get my light kit.
Date published: 2016-11-01
Rated 5 out of 5 by from Great. Our older, generic, brass fan had one of the ugly spaceship bulb housings that only allows for a single bulb. I wanted more light so I looked all over and this was the only light kit that fits multiple normal light bulbs. All the other kits use the candelabra or mini candelabra bulbs. I don't want to have a bunch of different style light bulbs taking up space, and with LED bulbs available, the wattage pull can be less than a single incandescent bulb. Only way to improve it would be to make it a 4 bulb unit. You can keep the included CFL bulbs too. I run all LED, so I'd rather the $ go towards the extra bulb base being in the unit (for a total of 4). Install is easy and you have several options to get it together. Mine was not in stock at the store but the ship to store option was just a few days.
Date published: 2016-10-11
Rated 3 out of 5 by from Not a universal kit ! The connectors are shoved through a hole, If you are not using the cover that goes with it then you have to remove the cover by cutting one of the wires because the fittings will not fit through the hole. The male part of the painted light does not fit inside the female where you would put two screws to hold it in place. I will have to drill 2 holes and cut the metal to force it into place.
Date published: 2016-08-30
Rated 4 out of 5 by from I purchased this for a Hunter fan - the base has 3 holes, this light attachment has 2 and is a li... I purchased this for a Hunter fan - the base has 3 holes, this light attachment has 2 and is a little larger than the Hunter base. I drilled two holes and it worked. It was my fault in ordering the wrong light kit but you can see by the picture no one would notice!
Date published: 2016-12-20
Rated 3 out of 5 by from It was easy to install. I had purchased the same unit earlier and knew what it was. I recommend o... It was easy to install. I had purchased the same unit earlier and knew what it was. I recommend opening the box at the store to inspect the globes. One of mine was broken and the store replaced it with an unbroken one. It looks like poor packaging.
Date published: 2016-12-09
  • y_2017, m_2, d_19, h_18
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_161
  • loc_, sid_203077385, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • REVIEWS, PRODUCT