Rated 4.7 out of 5Â by 6
Rated 5 out of 5Â by Sattamander Cheaper than new fan
These are a great replacement for most fans, just make sure you measure the distance from hole to hole on the fan blade to make sure your holes match with the holes on these arms. So far I have seen two different hole 'settings' so please measure yours before ordering to save yourself. You will find the hole distances on the specs page but please not that the specs are WRONG where the holes are concerned on the fan motor itself. No way that distance is only 1 1/16, more like 1 1/2.
Now a quick pointer to help you install these. I HATE working overhead and here you have no choice so follow these pointers to help you avoid some nasty frustration. Best to have some one help you to hold the fan blade for you and to keep the motor unit from turning on you. But if you have to do it yourself I strongly suggest using a magnetic screw driver and a long one at that, about 8 inches long. Before this I kept dropping the screws while trying to match them with the holes and the short screw driver forced me to work at a bad angle for lining the screws up with the holes and then screwing them in. Truth be know I wasn't having ANY luck at all with the short screw driver that was not magnetic.
Last pointer is insert the screw first that is opposite the way you are handed. If right handed put the left screw in first and the opposite for leftys. Less obstruction that way for the first screw thus making it far easier to put in the last screw
July 29, 2014
Rated 5 out of 5Â by BA23602 Better than replacing a whole ceiling fan!
I accidentally broke one fan blade arm on the ceiling fan in my kitchen. I know it sounds silly, but it really did happen! I had four blades on a five blade fan. When I turned it on, it would whirl around lopsided. It was awful. I needed to find just the blade arm but was told that would be a lost cause. I didn't want to replace the whole ceiling fan! Thank you Home Depot for helping me find the replacement arm!
April 15, 2014
Rated 4 out of 5Â by Natureboy Nice deal
You just have to make some adjustment to the fan base in order to use this Westinghouse Arm on Hampton Bay fan. I made the adjustment and I was able to install it. Looks great and the cost is very reasonable.
July 15, 2014
Rated 5 out of 5Â by Bill Matched the originals very nicely.
Fit and finish matched the original fan very nicely. All the mounting holes lined up to the original fan, no need to make any alterations.
February 25, 2014
Rated 5 out of 5Â by Nancy they are great
they are great, easy to assemble, value is good, it would be nice if you did not have to buy all four if you only need one.
February 25, 2014