Rated 4.6 out of 5 by 11
Rated 5.0 out of 5.0 by Screwnail Blade arm replacement
Perfect match. And a great repair. I was able to locate them using the HD web site. Most helpful.
May 17, 2016
Rated 5.0 out of 5.0 by Electrician1 Perfect for my application!
Outstanding! These ceiling fan blade arms worked perfectly on my low profile Hunter ceiling fan (along with new aftermarket fan blades). I couldn't find any other arms that would fit with the limited clearance available.
October 6, 2015
Rated 5.0 out of 5.0 by Badger22 These arms work as they should
Fan works perfectly again and they look fine......
October 6, 2015
Rated 4.0 out of 5.0 by Charlie Replacement Parts
Nice to be able to buy replacement parts instead of buying for whole fan
September 1, 2015
Rated 4.0 out of 5.0 by Bear Good Buy
Received A Set Of Exterior Westinghouse Fan Blades As A Gift , But Bolt Pattern On Harbor Breeze Fan Arms Wouldn't Match Up To New Blades , Ordered Westinghouse Replacement Arms , Almost Lined Up Perfect , Saved Me From Buying A New Fan Assembly .
July 1, 2015
Rated 5.0 out of 5.0 by JimA Exact Replacement for Hunter Fan Arms
I purchased these fan arms and the Westinghouse fan blades to replace broken fan blades and bent arms for my Hunter outdoor ceiling fan that were damaged by a hurricane. I recommend replacing the arms and blades together. If you do then you'll have no issues with hole location between the arms and the blades.
The arms are an exact replacement and were easy to install. They were supplied with the screws and fiber washers to install the blades to the arms, however the screws to attach the arms to the fan were NOT supplied, so don't discard or strip the screws you remove from the old arms. Be sure to install the supplied fiber washers to the screws prior to installing the fan blades to the arms. Hint: install the center screw to the blades first and the other screw holes will align easily. Securely tighten the screws to the blades and the arms to the fan. Double check them to ensure none were missed.
After I installed the new arms and blades the fan worked perfectly with no shaking or wobbling.
April 28, 2015
Rated 5.0 out of 5.0 by BigFan Cheaper than replacing the fan!
Had a blade arm break after the kids tossed a ball too close to the fan. These weren't available in my local Home Depot so I had to order on line. Would have been helpful to have full details as to the spacing between holes, so you'd know if they were going to fit or not. The holes for mounting to the main fan body are 2.25" across; the holes at the other end are 3 and 15/16" across. Turned out to be the wrong size, but I was able to drill new holes in my fan blades, so it worked out. Aside from that, easy to install. You'll want to replace all the arms, to maintain proper balance, unless you have a perfect match with the old blade arm.
May 21, 2013
Rated 4.0 out of 5.0 by diyser arm for fan blades
We only had 4 parts even though the pkg had said five blade. We had already replaced 3 when we realized we would be short one. We are stopping in today to see if they happen to have 1 piece we can pick up. At this point the fan is running okay but really want them to match and of course work properly.
March 24, 2015