Whirlpool 1/2 HP Continuous Feed Garbage Disposal-GC2000PE - The Home Depot
Discontinued

Whirlpool

Model # GC2000PE

Internet # 203576234

1/2 HP Continuous Feed Garbage Disposal


Whirlpool 1/2 HP Continuous Feed Garbage Disposal
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$129.00 / each
CHECK EARLIEST DELIVERY DATE
FREE Delivery & Haul Away

Order Online or In Store

Contact your local store for pricing and to place orders in the following state(s): AK,GU,HI,PR,VI

Close  X

Enter Your ZIP Code


All Major Appliances within a single order must be delivered to the same address.


If you change the ZIP code:
Appliances may be unavailable for delivery in the new ZIP code

If you already have appliances in your shopping cart, any existing selections of parts, services, or Home Depot Protection Plans will be reset to the default selections

Loading...

SPECIFICATIONS

Dimensions
Assembled Depth (in.)  6.31 in  Assembled Height (in.)  11.38 in 
Assembled Width (in.)  6.31 in  Product Height (in.)  11.38 
Product Length (in.)  6.31  Product Width (in.)  6.31 
Details
Dishwasher drain connection  Yes  Disposer Feed  Continuous Feed 
Energy Consumption (kWh/year)  0.0  Grind chamber capacity (oz.)  26 
Grinding Speed (RPM)  1725  Horsepower (hp)  1/2 hp 
Kitchen Product Type  Disposal  Noise insulation  No 
Returnable  Non-Returnable  Stainless steel grind chamber  No 
Voltage (volts)  120 
Warranty / Certifications
Certifications and Listings  1-UL Listed  Manufacturer Warranty  Limited 1-year 

CUSTOMER REVIEWS

Rated 4.6 out of 5 by 23 reviewers.
Rated 5 out of 5 by Quiet I've had the disposal for a couple of months and am very satisfied with this product. It is very quiet and was very easy to install (did it myself). December 9, 2014
Rated 5 out of 5 by Works well Does what it says well. No problems, chops up whatever I put down the drain. December 10, 2014
Rated 5 out of 5 by Once again a great whirlpool product My old disposal died& the repairman installed the whirlpool disposal, what a nice surprise, works great and isn't too loud. Not much you can say about a disposal, except that it does the job and does it well like all the other whirlpool appliances I have had! Thanks for great products! I would love to win a new refrigerator so I could try that whirlpool too!!! December 1, 2014
Rated 4 out of 5 by quiet and powerful I bought this to replace a recently broken one (not whirlpool). It is quiet and was very easy to install. I recommend this product. November 17, 2014
Rated 5 out of 5 by Easy to install and works great My last Whirlpool Garbage Disposal lasted 18+ years, with light usage over the years. It was still working perfectly when I replaced it. I had to replace it because it rusted a hole on the side. My house has all Whirlpool appliances, and 18 years later, they are still working. This is why I went with another Whirlpool garage disposal. This Whirlpool 1/2 HP In-Sink disposal came with a power cord while my previous one was hot wired. If you don't want the power cord, there is model that doesn't come with the cord and require the disposal to be hotwired. This disposal is so much more quiet that my previous 1/3 hp model. Before removal and installation, I watched YouTube videos and researched online on how to remove and install the this garage disposal as well as how to add an outlet. Everything became very easy because of my research. There is a couple of things that I would like to point out during installation: 1- Clean out the water hose connecting the dishwasher hole on the disposal to the overflow drain above the sink. Over the years and years of usage, built up will happen. I managed to clean out some white pieces of things that look like rock from the hose. 2- When installing the new disposal and if you are using a dishwasher, don't forget to get a hammer and a screwdriver, and pop out the seal in the disposal that connects the water hose for the dishwasher. This can be easily missed in the installation manual. 3- When mounting the disposal to the sink, if you have difficulty lining up the ring on the neck of the disposal to the piece on the sink so that you can turn, hang and lock the disposal to the sink, check to see if there is a 1/4" gap between the 2 pieces. If there is a little gap of space, make sure the ring on the neck of the disposal is snapped into place - push it up. Once it is in place, you shouldn't have problems mounting the disposal and using the tool that comes with the disposal to turn the disposal and lock it in place. 4 - if you are replacing the ring in the sink, make sure you get plumber putty to seal the ring onto the sink to prevent water form leaking from the sink. October 21, 2014
2 3 >>