Model # 4396013RB

Internet #202204726

Whirlpool Dryer Vent Installer Kit


Dryer Vent Installer Kit

$2909 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Product Overview

The great thing about this item is that its venting system allows the wall vent to protrude up to 2-1/2 in. without having to be trimmed. The kit includes an extension collar that allows it to have a universal 4-1/2 in. clearance. This installer kit does a wonderful job of utilizing loop systems and DuraSafe patented snap-lock fittings. Packaging includes 4 ft. vent section that attaches to a close elbow, one 4 ft. vent section that attaches to a wall offset, and an extension collar. Total length of this item is 8 feet. Keep in mind that additional vents can be snapped between sections for longer runs.

  • Lets the wall vent protrude up to 2-1/2 in. without having to be trimmed
  • Includes an extension collar with a 4-1/2 in. clearance
  • Utilizes loop system and DuraSafe patented snap-lock fittings
  • Contains (1) 4 ft. vent section with a close elbow and (1) 4 ft. vent section that attaches to a wall offset elbow
  • Additional vent can be snapped between sections for longer runs
  • Metal, crush resistant, flexible dryer venting




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

Will this fit if you have a very small distance from your dryer to the wall? Thanks!

Asked by: Anonymous
I would say that you need about 6 inches clearance due to the ridged elbow bend.
Answered by: Woodlands27
Date published: 2016-02-16

Vent internally?

Can I attach a bucket to this so that my dryer can vent internally? That's how my unit was previously set up, but I can't find any vent buckets that are for use with a gas dryer.
Asked by: cozkfc
If you want or need a dryer that vents internally look at Bosch.
Answered by: Chagrin
Date published: 2016-11-01

I see that the overview says this dryer kit is compatible with gas dryers. Will it work with electric dryers also??

Asked by: Anonymous
It should! Gas dryers give off higher heat, so electric dryer use should be fine. Check your manual to see what size tubing you need or take measurement of your existing pipe to make sure it will fit.
Answered by: M4rtin
Date published: 2015-09-17

Can this be cut to a smaller size. i only need about 18inches.

Can this be cut to a smaller size. i only need about 18inches.
Asked by: Jude
Yes, you can trim to suit.
Answered by: CommunityAnswer
Date published: 2017-06-14
  • y_2017, m_7, d_19, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_, sid_202204726, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 99ms

Customer Reviews

Dryer Vent Installer Kit is rated 4.7 out of 5 by 29.
Rated 5 out of 5 by from Very well made!! Used this to replace plastic flex hose that was nothing but a fire hazard. Easy to put together and easy to take apart to clean out. Sturdy and well made. No leaks of heat either. Price was about the cheapest you could ask for! Highly recommend.
Date published: 2012-02-29
Rated 5 out of 5 by from Dryer Vent Installer Kit This was the easiest vent I ever installed. Took 5 minutes. Metal of the tube is strong and doesn't tear.No sharp edges. Bends at any angle you want. The attached elbows fit perfectly. This is the vent that should have been made for dryers years ago. You will not regret buying this.
Date published: 2013-04-02
Rated 5 out of 5 by from Basement Floor Dryer Vent Kit Two features make this kit superior to the flexible tube with the wire spiral: The 90 degree bends are close so the dryer can be as close to the wall as possible and the tubing is much stiffer so that it does not sag over time like plastic based products. The all metal construction may be a bit safer. If you have a 4" dryer discharge within 8' of the dryer this is worth considering.
Date published: 2015-10-08
Rated 5 out of 5 by from Met all my expectations and worked out well This vent kit was a big improvement over the other flexible lightweight products that sell for less. Didn't mind paying more for this superior product and it fits better in my application as compared with the other lightweight kits I previously installed. Worth the money and shipping to me was good.
Date published: 2015-07-16
Rated 5 out of 5 by from Excellent Dryer Hook Up This product installed easily, and looked very professional. It used slightly less room than a conventional flexible tube does which allows the dryer to be positioned closer to the wall. Very happy with it.
Date published: 2014-06-03
Rated 5 out of 5 by from The best ever I just had a front loading drying installed in a tight space, and this kit allowed me to fit it into the space. I looked at a lot of other options, and this one was the best by far.
Date published: 2011-12-10
Rated 5 out of 5 by from Easy to Install Great upgrade which fits various dryer models. Recommended without hesitation.
Date published: 2014-04-01
Rated 5 out of 5 by from Buy one! Love love love this dryer vent! The old foil type had holes and was spewing lint dust all over my laundry room. Very easy to install and I now have a lint free laundry area.
Date published: 2013-10-08
  • y_2017, m_7, d_19, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_29
  • loc_, sid_202204726, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 106ms