0724667647735

Wilsonart

Model 4835383504896

Internet #203592693

Store SKU #618265

Store SO SKU #1000114753

48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture

$48.00 /each
  • Please review actual sample before ordering
  • Color may vary from on screen and printer representations
  • Wilsonart designs offer great looks and superior value

Frequently Bought Together

Product Overview

Wilsonart's 48 in. x 96 in. Tumbled Roca Laminate Sheets provide enduring beauty like no other surfacing product. And, whatever pattern and color you choose for your kitchen countertop, bathroom vanity, laundry room or garage worktop, the beauty and easy maintenance will be yours at a price you can celebrate. A new look is yours for less, leaving you with more to spend on special extras.

  • Best value in surfacing, Wilsonart laminate offers design, performance and durability at a price for any budget
  • Wilsonart laminate exceeds the industry's highest standards for indoor air quality, with GREENGUARD certification on all laminate types
  • Wilsonart laminate contains a minimum of 20% post-consumer recycled content, the highest percentage of post-consumer recycled content in the industry
  • Please review actual sample before ordering as the pattern/color shown is a printed reproduction
  • Start your kitchen design today with our Kitchen Planner
  • Get a free quote with our Countertop Estimator

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

More Products With These Features

Search

Customer Questions & Answers

9 Questions13 Answers

Customer Questions & Answers

48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture
48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from 48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture
 
2 answers

How do u get to bend to go down to a lip and up to a backslash>

This question is from 48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture
Asked by
st augustine fl
Read all my Q&A
January 18, 2016
how flexible is this doesn't seem like it would flex to go down over lip of counter and up to cover old back splash> do u heat it or what>
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

January 28, 2016
Answer: 
You would need to heat the product to allow for bend.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

January 25, 2016
Answer: 
In order to create the edging and backsplash you are wanting. The laminate will have to be heated up to certain temperature and the it will be able to bend down the lip and up the wall. Please consult with a fabricator in your area. They will have the equipment for this process.
Thank You Wilsonart Customer Service
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from 48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture
 
2 answers

Are the edges of this product finished on all 4 sides, 2 sides or no finished sides?

This question is from 48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture
Asked by
Lodi, CA
Read all my Q&A
November 10, 2014
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Greenfield Indiana
Read all my Q&A
April 28, 2015
Answer: 
You have a finished side (top) and the side to be glued to a surface (bottom)
0points
1out of 2found this answer helpful.
Was this helpful?helpful1unhelpful1

December 4, 2014
Answer: 
This is a laminate sheet which needs to be bonded to a substrate to create a countertop. Please contact your local store for availability in pre-fabricated countertops. Thank you, Wilsonart Customer Service
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
This question is from 48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture
 
2 answers

Can you use this for a back splash?

This question is from 48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture
Asked by
Carl
PA
August 15, 2013
Instead of tile can you use this to stick to the dry wall for back splash?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Greenfield Indiana
Read all my Q&A
April 28, 2015
Answer: 
Depends on the type of back splash. If it's a 90 degree (straight back) then yes, but if its a curve or round over back splash then it is possible but you would really need to know what you're doing (sanding the back side to get it thinner and using a heat gun to soften and conform to back splash)
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

August 16, 2013
Answer: 
Hello Carl,
Thank you for asking about a WIlsonart laminate...Yes you can use the laminate as a back splash. It is not recommended to apply the laminate straight to drywall. The laminate needs a substrate before appling it to the wall.
Thank You
Daniel M
Wilsonart LLC
Customer Service Representative
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0
This question is from 48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture
 
2 answers

Can you install this laminate over existing laminate countertops?

This question is from 48 in. x 96 in. Laminate Sheet in Tumbled Roca Fine Velvet Texture
Asked by
KATIE
DALLAS, TX
January 28, 2013
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Greenfield Indiana
Read all my Q&A
April 28, 2015
Answer: 
Yes. wash the old stuff really well and recommend you run a sander over it.
+4points
4out of 4found this answer helpful.
Was this helpful?helpful4unhelpful0

January 28, 2013
Answer: 
We do not recommend bonding to existing laminate or melamine covered surfaces (in fact, our warranty does not cover these applications) because they are non-porous and often prove troublesome. If you decide to try anyway, follow these five guidelines:
1.Sand the entire existing laminate surface with coarse grit sandpaper and then clean the dust off. This creates scratches for the adhesive to grip Read More
We do not recommend bonding to existing laminate or melamine covered surfaces (in fact, our warranty does not cover these applications) because they are non-porous and often prove troublesome. If you decide to try anyway, follow these five guidelines:
1.Sand the entire existing laminate surface with coarse grit sandpaper and then clean the dust off. This creates scratches for the adhesive to grip into.
2.Allow the substrates and the glue to warm up to room temperature before use and perform all bonding at room temperature.
3.Ensure 100% of the area to be bonded is covered with an adequate amount of adhesive (see product label for specific coverage amounts); be especially diligent about coverage around the perimeter.
4.Do not try mating the substrates together too soon. The substrates will be ready to bond when the film of glue on each substrate feels tacky when you firmly press your fingertip onto it. The glue is NOT ready to bond and must dry longer if the glue is still wet or if any glue actually sticks to your fingertip and creates a rubbery “leg” as you pull your finger away.
5.After mating the substrates together, use a hand-held J-roller with as much manual pressure as you can bring to bear over the entire surface. Multiple passes are recommended.
Read Less
+9points
9out of 9found this answer helpful.
Was this helpful?helpful9unhelpful0
2 »
  • 2016-09-08 T13:26:14.372-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203592693, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.3 out of 5 by 3 reviewers.
Rated 3.0 out of 5.0 by Customer service was great however, The product was great, and the customer service was great however, the laminate sheet was broken upon arrival. We had to use it as the counter top man could not wait for another shipment. I am not sure I would order something like that to be shipped again. September 7, 2016
Rated 5.0 out of 5.0 by Great product The Tumbled Roca laminate looks great on the table tops of our camp box. It should be very durable and I plan to use the balance for my new leather working bench. I am very satisfied with this purchase. August 23, 2016
Rated 5.0 out of 5.0 by Fast delivery!! Product was as expected no cracks or chips came all in one box April 28, 2015
  • 2016-09-08 T15:12:42.739-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_203592693, prod, sort_default
1-3 of 3
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 31ms
  • REVIEWS, PRODUCT