0093645902013

Winchester

Model W8M040-214

Internet #202771076

Store SO SKU #1000801754

40,000 BTU 80% Multi-Positional Gas Furnace

$949.99 /each
  • 40,000 BTU natural gas, maintenance free, electronic ignition
  • Product sold without installation or permitting
  • Equipment should be sized/installed by a qualified professional

Frequently Bought Together

Product Overview

Ideal for new or replacement residential or commercial installations. The W8M Series 80% efficiency multi positional gas furnaces have a 33 in. tall cabinet and are designed for installation in up-flow, down-flow, and horizontal applications. These single stage furnaces are natural gas ready and convertible to proane (LP Gas) with the optional LP 347 conversion kit. The units are factory shipped for installation in up-flow and horizontal applications and can be easily converted for down-flow applications. All units are classified for Category I venting and may be common vented with another gas appliance as allowed by the National Fuel Gas Code. Features an electronic hot surface igniter for increased safety and efficiency, and adjustable speed maintenance free direct drive blower that never needs lubrication, and self diagnostic control module to monitor operation. The heat exchanger is constructed of tubular aluminized steel. Units are factory assembled, wired and tested to assure safe dependable and economic installation and operation. NOTE: Requires 1/2 in. input to gas valve, dedicated circuit breaker, and 120-Volt wiring with proper polarity and ground. 5 year limited parts warranty; 20 year limited heat exchanger warranty, 10 year heat exchanger warranty on commercial applications. Dimensions: 33 in. H x 14.5 in. W x 29.5 in. D. Available in 40K, 60K, 80K, 100K, and 120K BTU Input.

  • Natural gas ready and may be converted to LP gas with optional conversions kit
  • Multi-positional design with compact cabinet height of 33 in. for flexible installation
  • Electronic hot surface ignition for increased efficiency and safety
  • Maintenance-free, multi-speed, permanently lubricated direct-drive blower motor
  • Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation
  • Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
  • Professional installation recommended
  • Click here for more information
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions4 Answers

Customer Questions & Answers

40,000 BTU 80% Multi-Positional Gas Furnace
40,000 BTU 80% Multi-Positional Gas Furnace

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

Is this unit good enough to heat up a 1,000 sq. ft. home?

This question is from 40,000 BTU 80% Multi-Positional Gas Furnace
Asked by
Albuquerque, NM
Read all my Q&A
November 19, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

November 24, 2015
Answer: 
The unit will probably be sufficient, but you should contact us directly so that we can know a little bit more about the application and confirm the recommendation. Give us a call at 1-800-879-0123.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Is this good for 1200 sq. ft. house?

This question is from 40,000 BTU 80% Multi-Positional Gas Furnace
Asked by
california
Read all my Q&A
August 5, 2015
Single story 1200 sq. ft. home will it sufficient?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Lakewood, Ohio
Read all my Q&A
Home Improvement Profile: Professional
July 21, 2016
Answer: 
To properly calculate furnace size, you need to know house size and construction, location, heat loss, etc. Since a furnace replacement is not really a weekend DIY project, I would suggest you speak to a qualified HVAC contractor.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

how to convert this unit to propane

This question is from 40,000 BTU 80% Multi-Positional Gas Furnace
Asked by
tehachapi ca
Read all my Q&A
May 22, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 2, 2015
Answer: 
The unit comes natural gas ready and can be converted in the field with the optional LP 347 conversion kit. A qualified technician will be required to properly adjust gas pressure to assure safe and peak performance.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

does HD have a list of installers in my area ?

This question is from 40,000 BTU 80% Multi-Positional Gas Furnace
Asked by
montrose co
Read all my Q&A
April 15, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

April 21, 2015
Answer: 
Thank you for your recent inquiry with The Home Depot. The Home Depot partners with installers and home service professionals who meet the highest standards for experience, know-how and customer service to get your installation project done right. We screen and perform background checks on all of our service installers to ensure they have all applicable licenses and insurance before we send them out on Read More
Thank you for your recent inquiry with The Home Depot. The Home Depot partners with installers and home service professionals who meet the highest standards for experience, know-how and customer service to get your installation project done right. We screen and perform background checks on all of our service installers to ensure they have all applicable licenses and insurance before we send them out on any job. Unfortunately, we cannot give an estimate without conducting a consultation of the job. Please call us at The Home Depot Home Services at 1-800-557-5221 to schedule an appointment. Thank you for shopping Home Depot. Read Less
+1point
2out of 3found this answer helpful.
Was this helpful?helpful2unhelpful1
1 of 1
  • 2016-09-30 T23:09:40.682-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202771076, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 119ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.5 out of 5 by 2 reviewers.
Rated 4.0 out of 5.0 by good product We purchased an a/c system with a gas furnace. When it was installed the air handler wheel was out of balance and made a loud noise. It was replaced free of charge & is working very well with no noise. In my opinion this is a good product. September 24, 2014
Rated 5.0 out of 5.0 by Great unit Great unit for the price and perfect size for my rental unit.....nice and quiet also November 25, 2013
  • 2016-09-30 T20:11:19.035-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_2, tr_2
  • loc_en_US, sid_202771076, prod, sort_default
1-2 of 2
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 77ms
  • REVIEWS, PRODUCT