0093645901191

Winchester

Model W8M060-314

Internet #202771078

60,000 BTU 80% Multi-Positional Gas Furnace

$926.99 /each
  • 60,000 BTU natural gas, maintenance free, electronic ignition
  • Product sold without installation or permitting
  • Equipment should be sized/installed by a qualified professional

Frequently Bought Together

Product Overview

Ideal for new or replacement residential or commercial installations. The W8M Series 80% efficiency multi-positional gas furnaces have a 33 in. tall cabinet and are designed for installation in up-flow, down-flow, and horizontal applications. These single stage furnaces are natural gas ready and convertible to proane (LP Gas) with the optional LP 347 conversion kit. The units are factory shipped for installation in up-flow and horizontal applications and can be easily converted for down-flow applications. All units are classified for Category I venting and may be common vented with another gas appliance as allowed by the National Fuel Gas Code. Features an electronic hot surface igniter for increased safety and efficiency, and adjustable speed maintenance free direct drive blower that never needs lubrication, and self diagnostic control module to monitor operation. The heat exchanger is constructed of tubular aluminized steel. Units are factory assembled, wired and tested to assure safe dependable and economic installation and operation. NOTE: Requires 1/2 in. input to gas valve, dedicated circuit breaker, and 120-Volt wiring with proper polarity and ground. 5 year limited parts warranty; 20 year limited heat exchanger warranty, 10 year heat exchanger warranty on commercial applications. Dimensions: 33 in. H x 14.5 in. W x 29.5 in. D. Available in 40K, 60K, 80K, 100K, and 120K BTU Input.

  • Natural gas ready and may be converted to LP gas with optional conversions kit
  • Multi-positional design with compact cabinet height of 33 in. for flexible installation
  • Electronic hot surface ignition for increased efficiency and safety
  • Maintenance-free, multi-speed, permanently lubricated direct-drive blower motor
  • Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation
  • Input BTU is 60,000 and with the 80% efficiency rating yields an output BTU of 48,000
  • Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
  • Professional installation recommended
  • Click here for more information
  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

6 Questions6 Answers

Customer Questions & Answers

60,000 BTU 80% Multi-Positional Gas Furnace
60,000 BTU 80% Multi-Positional Gas Furnace

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
1 answer

I have a mobile home and need a new heater. What do you recommend?

This question is from 60,000 BTU 80% Multi-Positional Gas Furnace
Asked by
Read all my Q&A
May 30, 2016
It's a 3 bedroom two bath
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

June 2, 2016
Answer: 
We offer the WEFC and WEFX series mobile home electric furnaces through www.homedepot.com. We do not, however, offer mobile home gas furnaces, or gas furnaces approved for installation in mobile homes through www.homedepot.com. Typically, sizing of the equipment is indicated by the HUD sticker for the mobile home usually located in a kitchen cabinet, or near the electrical panel. Should you need more Read More
We offer the WEFC and WEFX series mobile home electric furnaces through www.homedepot.com. We do not, however, offer mobile home gas furnaces, or gas furnaces approved for installation in mobile homes through www.homedepot.com. Typically, sizing of the equipment is indicated by the HUD sticker for the mobile home usually located in a kitchen cabinet, or near the electrical panel. Should you need more information, you can contact us at 800-879-0123. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

is mechanical license required to purchase

This question is from 60,000 BTU 80% Multi-Positional Gas Furnace
Asked by
Read all my Q&A
February 15, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 17, 2016
Answer: 
A mechanical license is not required for purchasing the equipment. The installation, however, should be done by a qualified technician to ensure safe, proper, and efficient operation. Register the unit online to activate the warranty and ensure the maximum warranty on the equipment.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
1 answer

Chimney requirements?

This question is from 60,000 BTU 80% Multi-Positional Gas Furnace
Asked by
Brethren, Michigan
Read all my Q&A
December 6, 2015
What are the chimney requirements for this furnace?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

December 8, 2015
Answer: 
The furnace has a 4 in. flue and when venting into a chimney, you must use a chimney liner as the flue gases are acidic and can deteriorate the motor joints of the chimney. Follow local codes as they would apply to venting an 80% AFUE gas furnace.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
 
1 answer

Stage

This question is from 60,000 BTU 80% Multi-Positional Gas Furnace
Asked by
Newberg Oregon
Read all my Q&A
December 2, 2015
Is this a single stage or two stage unit?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

December 4, 2015
Answer: 
This is a single stage 80% efficient gas furnace. The only 2-stage furnace we offer is 95% efficient. Here is the link to the 60,000 BTU 95% variable speed gas furnace: http://www.homedepot.com/p/Winchester-60-000-BTU-96-2-Stage-Variable-Speed-Multi-Positional-Gas-Furnace-W9V060-317/202771091?keyword=w9v060-317
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 »
  • 2016-08-29 T13:58:14.784-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202771078, prod, sort_default
2 »
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 107ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 3.7 out of 5 by 3 reviewers.
Rated 5.0 out of 5.0 by Easy to install, set up & operate. The unit was easy to install, set up & operate it works great. March 25, 2014
Rated 1.0 out of 5.0 by Heat exchanger leaks, motor failed after only a few weeks It worked last year but I hardly used it because of the smell of combustion coming from the heat exchanger. The Flue was routed and sealed Heat exchanger leaked during the brief period it actually works. The control board failed. It just hums now. November 24, 2013
Rated 5.0 out of 5.0 by Excellent product Furnace works as planned and heats the house quick, better than the ones that home builders install on new homes. December 31, 2013
  • 2016-08-29 T14:07:46.164-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_3, tr_3
  • loc_en_US, sid_202771078, prod, sort_default
1-3 of 3
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 35ms
  • REVIEWS, PRODUCT