Message to Our Customers
Discontinued

Winchester

Model # W9M060-317

Internet # 202771086

60,000 BTU 95.5% Multi-Positional Gas Furnace

This item has been discontinued.
The Home Depot no longer carries this specific product.

$1414.80 /each

  • 60,000 BTU unit that is maintenance free and natural gas ready
  • Product sold without installation or permitting
  • Equipment should be sized/installed by a qualified professional
Loading...

PRODUCT OVERVIEW

Model # W9M060-317

Internet # 202771086

Ideal for new or replacement residential or commercial installations. The 60,000 BTU W9M Series 95.5% efficiency multi-positional gas furnaces have a 33 in. tall cabinet and are designed for installation in up-flow, down-flow, and horizontal applications. These single stage, high efficiency furnaces are natural gas ready and convertible to propane (LP Gas) with the optional LP 347 conversion kit. Factory shipped for installation in up-flow and horizontal applications and can be easily converted for down-flow applications. Certified for Category IV venting and may be vented either through a side wall or roof applications using approved plastic as allowed by the National Fuel Gas Code. Features an electronic hot surface igniter for increased safety and efficiency, and adjustable speed maintenance free direct drive blower that never needs lubrication, and self diagnostic control module to monitor operation. The primary heat exchanger is constructed of tubular aluminized steel and has a stainless steel secondary heat exchanger. Units are factory assembled, wired and tested to assure safe dependable and economic installation and operation. NOTE: Requires 1/2 in. input to gas valve, dedicated circuit breaker, and 120-Volt wiring with proper polarity and ground. 5 year limited parts warranty; lifetime limited heat exchanger warranty, 10 year heat exchanger warranty on commercial applications. Dimensions: 33 in. H x 17.5 in. W x 29.5 in. D. Not certified for mobile home use.

  • Natural gas ready and may be converted to LP gas with optional conversions kit
  • Multi-positional design with compact cabinet height of 33 in. for flexible installation
  • High tech tubular aluminized primary and stainless steel secondary heat exchangers
  • Maintenance-free, multi-speed, permanently lubricated direct-drive blower motor
  • Built-in, high level self diagnostics with fault code displays standard on integrated control module for reliable operation
  • Venting applications - may be installed as either 2-pipe(sealed combustion) or single-pipe vent (using indoor combustion air)
  • Equipment should be sized, selected and installed by a qualified professional to ensure proper installation, safe operation, adherence to federal, state and local codes and for valid warranty; see installation guide for more details
  • Professional installation recommended
  • Click here for more information

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Dimensions
Product Depth (in.) 
29.5 
Product Height (in.) 
33.0 
Product Width (in.) 
17.5 
Details
Annual Fuel Utilization Efficiency (AFUE) (%) 
95.5 
Energy Consumption (kWh/year) 
57000.0 
Fuel Gauge 
No 
Gas or Electric 
Gas 
Heat rating (BTU/hour) 
57000.0 
Heating Product Type 
Forced Air Furnace 
Heating Technology Type 
Convection 
Number of Blower Speeds 
4 or More 
Power/Fuel Type 
Natural Gas 
Product Weight (lb.) 
106.0 lb 
Returnable 
90-Day 
Warranty / Certifications
Certifications and Listings 
CSA Listed 
ENERGY STAR Certified 
No 
Manufacturer Warranty 
5 Years - Limited on parts / Limited Lifetime on heat exchanger 

CUSTOMER REVIEWS

Rated 4.0 out of 5 by 5 reviewers.
Rated 5.0 out of 5.0 by great furnace, great price I am a handy person and have worked with gas lines, electrical, plumbing etc. which made this installation much easier. The furnace installation went smoothly and was far cheaper than having someone else do it. A nice bonus was the online warranty registration which once completed, added an additional 5 years to the parts warranty. I would purchase again in a heartbeat. Furnace is well constructed and runs quietly. I am looking forward to years of service from this unit. Cons: Installation manual is unclear at times...thank goodness this furnace is exactly like almost every other single stage furnace out there...thanks YouTube people for helpful videos which filled in the blanks. One other minor issue was that the sealant weatherstripping on the cabinet door was slightly torn and mis-applied. Some careful removal and re-application did the trick. Someone was in a hurry I guess. Home Depot did a nice job with text/email notification along the way. It was a great experience. Thanks J June 11, 2014
Rated 5.0 out of 5.0 by Good furnace This is my first night with the furnace running. So far, so good. Decided to install it myself with the help of my wife's very knowledgeable grandfather. I don't have natural gas where I live so I had to buy the LP conversion kit. It was easy to convert to LP and installation was easy (since we were replacing an older 80% eff. so all the duct work and plenum was already there. Just had to fabricate a base for it and then hook up the electric, gas line, and thermostat. The trickiest part of the whole setup was fine tuning the gas pressures at the inlet and manifold. But, after a few tries we got it to the correct spec. Pros: Fairly easy to follow installation instructions Free home shipping Seems like a quality piece of equipment Cons: No filter rack included so we had to fabricate one A but pricey but not bad for a 95.5% efficiency November 7, 2013
Rated 5.0 out of 5.0 by Overall very good experience despite damaged cabinet. Ours is a simple single stage installation. Furnace appears to be of high quality workmanship and manufacture. Has other good reviews. New installation so cannot comment on efficiency. Easy to install. November 5, 2013
Rated 1.0 out of 5.0 by worst furnace not worth it at all this furnace is junk i have one first off the heat is worm at the most. My home 1.000 sf takes for ever to get to 70 will run for a hour and mine went just got it, fine things happen 50 bucks for the part and some one too come out the heating and cooling man looks at my furnace and tell me its a 500.00 furnace at 1300.00 price and how sold it too me thing a joke and for that price he will give me a name brand with air for the price i paid the hvac co is out of waterford mich over all do not do it get a name brand thanks ken December 1, 2014
Rated 4.0 out of 5.0 by works great, design and installation issues though Poor directions (I had to look up online to find better directions even though. I had an ex HVAC worker install it for me). The furnace brings air in from the bottom, which means if you mount this upright, you have to put a table under it and then cut a hole in the table for air intake. Also, I had to make my own filter frame to attach to the bottom of the table since the furnace didn't have a way to attach (and then readily replace) a filter directly on the furnace. Now that it's installed though, it runs great and I love it. December 17, 2013
  • 2015-06-30T12:25:50.792-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_5, tr_5
  • loc_en_US, sid_202771086, prod, sort_default
1-5 of 5

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.