Model # DS-2000

Internet #204701089

Winegard Universal Pipe Tower Mount for Antenna
0615798309497

Winegard

Universal Pipe Tower Mount for Antenna

$11.33 /each

Frequently Bought Together

Product Overview

If you're looking to mount more than one antenna on the same mount, or if you want to mount a compact antenna on the same mast as the dish, look no further. Use the included 2 U-bolts to adapt to different pole sizes or use without the U bolts for attic installations. Works great for any installation.

  • Quick and economical mount for adding compact off-air antennas to satellite system
  • 22 in. pipe E coated for maximum weather protection
  • Adaptable many pole installations
  • Made in the USA

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

will model# TB-0005 fit into model# DS 2000

Asked by: GAK
Yes the mast (TB-0005) has an OD of 1-1/4" and the mount (DS-2000) uses a 1-1/2" ID tube. It is a little loose. I would recommend drilling a hole and use a #10 stainless steel sheet metal screw to keep it from rotating.
Answered by: Hammerandnail
Date published: 2017-01-16

Could you give me a size of this tower mount DS-2000, please; total length,diameter of pole,what made with? thanks

Asked by: Terry
It is made from heavy gauge steel, like thin-wall conduit and powder coated. The bend is 45 deg. The distance from the mounting surface to the projection of the outside wall of the tube, where the mast is inserted, is 13". The diameter of the tube is 1-1/2". A standard 1" diameter mast will work, but would recommend drilling a hole and use a stainless steel screw to keep the mast from turning.
Answered by: Hammerandnail
Date published: 2017-01-16

Diameter of pipe and clearance from wall/soffit.

What is the diameter of the pipe? How far does the pipe extend from the place of attachment?
Asked by: TomB
1.5" inside diameter of pipe (probably add approx. another 1/16th to 1/8th inch for outside diameter), and it will extend approx. 11.75" (clearance) horizontally from attach point.
Answered by: RunTheRace
Date published: 2017-02-20
  • y_2017, m_3, d_24, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_3
  • loc_, sid_204701089, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 24ms
  • QUESTIONS, PRODUCT

Customer Reviews

Universal Pipe Tower Mount for Antenna is rated 4.5 out of 5 by 20.
Rated 5 out of 5 by from Works Perfect Stout construction. Typical U bolt attachment secures the side arm to mast pipe very well. My antenna was then mounted to the side arm using the usual U bolts.
Date published: 2016-09-27
Rated 3 out of 5 by from This product is not as universal as it could be. As you can see it is only adapted to a roof eav... This product is not as universal as it could be. As you can see it is only adapted to a roof eave that is plumb. If your eaves are 30 deg. off plumb this mount does not work. One important detail you cannot tell is this scale from the picture. If your eaves are plumb they must be 1 x 10 or 2 x10 lumber. In my opinion, not many eaves exist with this wide of lumber. The quality is very good as I would expect from Winegard. Too bad they did not put more effort in the design.
Date published: 2017-01-16
Rated 5 out of 5 by from I used this product to mount the external antenna for a cell phone signal booster system. Install... I used this product to mount the external antenna for a cell phone signal booster system. Installation was simple and straight forward, which was a blessing since I was working on a ladder over 20 feet off the ground. It is well made and sturdy. I would expect it to last indefinitely.
Date published: 2017-03-07
Rated 4 out of 5 by from I bought it to mount a directv antenna it worked, but needed to be 2 inches in diameter instead ... I bought it to mount a directv antenna it worked, but needed to be 2 inches in diameter instead of 1.5 for my use. I had to put a small piece of pipe in to make it tight.
Date published: 2017-03-21
Rated 4 out of 5 by from Pipe Tower mount Pleased with purchase, serves it's purpose. would've liked a telescopic version but still happy with this one.
Date published: 2017-03-21
Rated 4 out of 5 by from Great help It was nice to have someone who new what and how to look up an item thank you for all your help.
Date published: 2016-09-27
Rated 5 out of 5 by from This is all you need Easy to mount and strong...............................
Date published: 2017-01-31
Rated 5 out of 5 by from Strong design, easy to install.... Strong design, easy to install.
Date published: 2017-02-07
  • y_2017, m_3, d_25, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_, sid_204701089, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 24ms
  • REVIEWS, PRODUCT