0827578031331

WingIts

Model TB-WINGIT-RES

Internet #203519197

Store SKU #147567

Studless Install Grab Bar Fastener

$15.78 /each
  • Rated for up to 600 lbs. in tile and drywall
  • No blocking or wall studs needed
  • Fire retardant and waterproof

Frequently Bought Together

Product Overview

Rated for up to 600 lbs. in tile and drywall, the WingIts Studless Install Grab Bar Fastener incorporates ultra strong fastener technology to allow for quick installation of WingIts and WingIts compatible grab bars. With no blocking or wall studs required, this fastener is fire retardant and installs completely waterproof in both new and existing construction, used extensively in commercial, institutional and residential grab bar installations. When installing into ceramic wall tile, plaster or marble, use the Apache200 drill technology for quick, precise holes (3/4 in. holes required).

  • Exceeds all building codes and ADA guidelines
  • No studs required for installation
  • Self-waterproofing with no caulk needed
  • Installs in minutes and lasts a lifetime
  • Designed for 2 in. x 3 in. or larger hollow walls and wall substrates from 1/4 in. to 1.3 in. thick
  • Backed by limited lifetime warranty

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

4 Questions7 Answers

Customer Questions & Answers

Studless Install Grab Bar Fastener
Studless Install Grab Bar Fastener

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
This question is from Studless Install Grab Bar Fastener
 
4 answers

how many wingits in the package

This question is from Studless Install Grab Bar Fastener
Asked by
ky
Read all my Q&A
August 9, 2015
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (4)

Asked by
Livonia, MI
Read all my Q&A
January 19, 2016
Answer: 
There were two wing-its in the package that I purchased. They were seperate from the grab bar package.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Asked by
Arnold, Missouri
Read all my Q&A
Home Improvement Profile: DIYer
October 20, 2015
Answer: 
This package contains a pair of WingIts for the the installation of a grab bar, but there are four WingIt fasteners. Each pair is linked with a spacer to simplify the installation of a grab bar.
For my need, I required individual WingIts, but none of the stores stock them. I simply clipped the connectors and used the WingIts individually for my installation, and they worked perfectly.
+3points
3out of 3found this answer helpful.
Was this helpful?helpful3unhelpful0

August 11, 2015
Answer: 
The package quantity is two WingIts.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

August 10, 2015
Answer: 
A package contains two grab bar fastener.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Studless Install Grab Bar Fastener
 
1 answer

Can winglts be used with a acrylic shower wall with no stud behind it

This question is from Studless Install Grab Bar Fastener
Asked by
Read all my Q&A
August 7, 2016
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
St. Louis, Missouri
Read all my Q&A
Home Improvement Profile: DIYer
August 9, 2016
Answer: 
For an official answer, I'd look to the manufacturer's website or instructions. In my personal opinion, the answer is a definitive NO. Fiberglass/acrylic tub surrounds and showers are a lightweight material that's subject to splintering and cracking. Unless specifically reinforced, as those with built-in bars are, they just aren't designed to handle the weight or force that one could place on a bar. I've Read More
For an official answer, I'd look to the manufacturer's website or instructions. In my personal opinion, the answer is a definitive NO. Fiberglass/acrylic tub surrounds and showers are a lightweight material that's subject to splintering and cracking. Unless specifically reinforced, as those with built-in bars are, they just aren't designed to handle the weight or force that one could place on a bar. I've been asked to install these in this fashion previously and I've refused for fear of what could happen if one put too much weight on it. Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
This question is from Studless Install Grab Bar Fastener
 
1 answer

Compatability Moen Grab bars and Wingits fasteners

This question is from Studless Install Grab Bar Fastener
Asked by
Pittsburgh
Read all my Q&A
March 10, 2016
I bought moen grab bars can I use the WingIts fastener with Moen products?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
Home Improvement Profile: DIYer
August 14, 2016
Answer: 
Yes, I installed a Moen grab bar using this kit. Measure carefully before drilling, because the screw holes for mounting the grab bar are offset from the center of the holes that you drill for the fasteners.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
This question is from Studless Install Grab Bar Fastener
 
1 answer

How many packages are needed to install 1 grab bar?

This question is from Studless Install Grab Bar Fastener
Asked by
Houston
Read all my Q&A
February 28, 2016
Do I need 2 to install 1 grab bar?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

Asked by
Read all my Q&A
Home Improvement Profile: DIYer
August 14, 2016
Answer: 
The package I bought contained two fasteners which is all you need for one grab bar. On the package, it reads model TB-WINGIT-RES.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-09-08 T13:29:13.056-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_203519197, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 38ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.1 out of 5 by 31 reviewers.
Rated 5.0 out of 5.0 by These fasteners do work well I just installed a Moen grab bar that cost just a bit more than this fastener kit. As mentioned in other reviews, the screw holes (or screw shaft) of this fastener are offset from the center of the holes that you'll drill, so check your grab bar mounting holes and measure carefully before drilling. You'll need either a 3/4" drill bit (one is recommended on the package) or a 3/4" hole saw. I used a hole saw and it worked well. Also, decide exactly where you want the grab bar before applying the foam drilling template; it's almost impossible to remove without taking the paint off the wall if you try. You may need gloves to push the wings through the hole; it's a very tight fit. Finally, If you need help, go to www.wingits.com and watch the installation video. Note that Moen offers an installation kit that requires only one hole to be drilled per side, but it's much more expensive. August 14, 2016
Rated 4.0 out of 5.0 by Quick grab bar solution Seems to work good but be careful drilling holes in wall as the black base plate is off center and may not line up if yoy are using a bar with 3 holes only. August 2, 2016
Rated 2.0 out of 5.0 by Not OEM WingIts. Online help is virtually none existent Printed instructions are only moderately helpful. And there are no video instructions available online. There are videos for related products, but not this one. Why? Home Depot sells repackaged WingIts (did a Home Depot exec set up his brother in law in business?) Next time I'll buy OEM WingIts instead. That way I can call the company and get real help from the manufacturer. June 29, 2016
Rated 5.0 out of 5.0 by Fasteners Work Great The fasteners were easy to install and with a 400# rating for each, they are a definite use when installing handicap graab bars. May 3, 2016
Rated 5.0 out of 5.0 by Best hollow wall anchors available These anchors are the first I have ever found that can deliver exactly what they promise! Being retired from the building trades I have used most every hollow wall anchor on the market. Most can install clocks, pictures, shelves even earthquake anchors. These are the first anchors I have ever found that can actually anchor ADA grab bars. All you need to do is follow the directions for the anchors. I’ve used these now with 5/8 standard and green board drywall, tile with both thin set on drywall and tile with mastic on concrete backer board. All of these installations gave excellent results. Remember to get there Apache 3/4 drill for tile installations. These are my new earthquake anchor for TVs and heavy cabinets along with ADA grab bars! February 22, 2013
Rated 5.0 out of 5.0 by Works great We bought this for my mother in law and installed it in the bathroom. She can now stand and get up without the worry of falling. They are sturdy and installed in minutes. February 16, 2016
Rated 1.0 out of 5.0 by grab bar fastener Would not recommend product for plastic shower stalls, and neither does manufacturer - if you read the instructions. This was the wrong product to mount grab bar on fiberglass shower stall. It was designed to mount on drywall supported stall. package poorly identified as to application. Ended up using a Moen product that was easy to install in a fiberglass stall, but mated poorly with the Glacier grab bars - had to drill out mounting holes in grab bar by 1/32 to make holes line up. No complaints with grab bars They're mounted now, but recommend using Moen bars with Moen fasteners. H D does not seem to carry fasteners for unsupported shower stalls. June 30, 2015
Rated 5.0 out of 5.0 by Very innovative item The offset just about got me into trouble on the first one. I watched the installation video a second time and had no issues after that. I decided to use the adhesive backed foam sealer that also acts as a template, even though I was installing a toilet grab bar. I had a 3/4" wood boring bit already which worked fine on my drywall. When complete, I have a rock solid professional installation. These are a bit pricey but worth it IMHO. January 22, 2016
  • 2016-09-08 T15:20:45.781-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_31, tr_31
  • loc_en_US, sid_203519197, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 34ms
  • REVIEWS, PRODUCT