0320066053575

Wolman

Model 14396

Internet #204322742

1 gal. F and P Natural Exterior Wood Stain Finish and Preservative (Case of 4)

$104.00 /case

Frequently Bought Together

Product Overview

Wolman 1 gal. F&P Natural Exterior Wood Stain Finish and Preservative is an oil-based wood finish that provides new or weathered wood with UV and water repellent protection. Protect against fading and graying. Provide transparent color in natural wood tones that reveal and highlight natural wood grain and texture.

California residents: see   Proposition 65 information

  • Brush or spray on all outdoor wood including wood decks, fencing, siding and cedar siding
  • Covers approximately 200 sq. ft. per gal.
  • Natural
  • Deep-penetrating, transparent stain, rich oil finish beautifies new wood and renews weathered wood
  • Deep-penetrating flat finish with long-term water repellent prevents cracking, splitting and warping
  • EPA registered preservative prevents surface mold/mildew growth, rot and decay
  • Clean up with mineral spirits
  • Which type of exterior paint is best for your home?

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

3 Questions5 Answers

Customer Questions & Answers

1 gal. F and P Natural Exterior Wood Stain Finish and Preservative (Case of 4)
1 gal. F and P Natural Exterior Wood Stain Finish and Preservative (Case of 4)

Ask your questions. Share your answers.

 
 
Clear Search Term
 
 
Sort By:
 
2 answers

Can this product be used on pressure treated wood or is it only for cedar/

This question is from 1 gal. F and P Natural Exterior Wood Stain Finish and Preservative (Case of 4)
Asked by
Hernando Beach, Florida
Read all my Q&A
August 14, 2016
I would like to use this on a 5 year old floating dock
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

August 15, 2016
Answer: 
Wolman F & P Exterior Wood Stain Finish and Preservative is suitable for use on all species of pressure-treated lumber, Cedar, Redwood, Poplar, Hickory, and North American hardwoods.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

August 15, 2016
Answer: 
This item can only be used on pressure treated wood after the wood has dried.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
 
2 answers

I had my deck stained using Wolman's F & P Golden Pine a week ago. (5-21-15)

This question is from 1 gal. F and P Natural Exterior Wood Stain Finish and Preservative (Case of 4)
Asked by
Erlanger, Ky
Read all my Q&A
May 27, 2015
It is still so slippery its like walking on ice.
The painters just applied and brushed out the stain and it looks great but you can hardly stand up on it let alone walk.
What needs to be done to fix this problem easily and quickly?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers (2)

Asked by
Roanoke VA
Read all my Q&A
July 20, 2016
Answer: 
I would give it another 4 weeks and If it is that slippery I would pressure wash it off . Let it dry for a few days or even longer, be sure that the wood is good and dry. apply the F&P again. I don't know how it was applied before, but use a Wooster Stain Brush and brush the stain on. Do not roll it on with a roller and brush it, just brush it in not leaving a heavy coat. The stain must go into the wood Read More
I would give it another 4 weeks and If it is that slippery I would pressure wash it off . Let it dry for a few days or even longer, be sure that the wood is good and dry. apply the F&P again. I don't know how it was applied before, but use a Wooster Stain Brush and brush the stain on. Do not roll it on with a roller and brush it, just brush it in not leaving a heavy coat. The stain must go into the wood not float on top. You can apply a second coat about 4 to 5 days later the same way. Do not apply any more coats after 2 weeks.
Sounds to me like this had a real heavy coat of stain at one time. Hope that I have helped you.
Read Less
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

May 29, 2015
Answer: 
The way to fix this is by sanding the surface. It sounds as if they didn't sand the wood down to bare wood.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
 
1 answer

Will this product yeild good results if my decking was previously been waterproofed 3 season's ago?

This question is from 1 gal. F and P Natural Exterior Wood Stain Finish and Preservative (Case of 4)
Asked by
Leominster, MA
Read all my Q&A
August 3, 2016
I started this deck project 3 seasons ago and at that time applied Thompson's clear water sealer to new ceder pressure treated decking. How will this product work after cleaning with deck wash in this situation? Is there something else I need to do?
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

August 4, 2016
Answer: 
Wood needs to be bare in order for proper penetration of coating. Conduct a splash test on bare wood to confirm water absorption before applying Rust-Oleum Wolman F & P Finish and Preservative. Note: Chlorine bleach cleaners alone are not recommended. These products degrade the wood structure, interfering with penetration and adhesion of protective coatings. To conduct a Splash Test, sprinkle several Read More
Wood needs to be bare in order for proper penetration of coating. Conduct a splash test on bare wood to confirm water absorption before applying Rust-Oleum Wolman F & P Finish and Preservative. Note: Chlorine bleach cleaners alone are not recommended. These products degrade the wood structure, interfering with penetration and adhesion of protective coatings. To conduct a Splash Test, sprinkle several handfuls of water on a few distinct areas of the bare wood surface. If the water absorbs rapidly, the surface is ready to be coated. If the water beads, puddles or is not absorbed, an internal or external barrier exists, which must be eliminated before application of the preservative finish. Prepare the surface with Wolman® DeckBrite™ (Powder Concentrate), Deck & Fence Brightener (Liquid Concentrate) or DeckStrip® products and repeat the splash test to confirm water absorption before applying this product. Read Less
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
1 of 1
  • 2016-08-24 T14:51:14.980-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_204322742, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 130ms
  • QUESTIONS, PRODUCT

Customer Reviews

Rated 4.7 out of 5 by 23 reviewers.
Rated 5.0 out of 5.0 by Excellent Used it on a new deck. Very easy to apply and clean up. Absorbs well into the wood. The finished application looks great. The color is about the same as the one pictured on the can. August 3, 2016
Rated 5.0 out of 5.0 by Good stuff Great stain. Was available in stores but now just online. Lasts better than water based,water clean up from stores. July 27, 2016
Rated 5.0 out of 5.0 by love this stain I have about 20 years as a painter and in paint department sales. This is what you should use. July 5, 2016
Rated 5.0 out of 5.0 by Wolman We have used this for years on our many outside wood structures...excellent product ...rebate makes it really affordable...should have bought more during rebate period! June 16, 2016
Rated 5.0 out of 5.0 by Awesome product, easy to use! We purchased this product to stain/seal the cedar deck and outdoor kitchen cover. As you can see, the contrasting stain selection and finished project is warm and inviting. Stain was easy to use and only required a one-coat application! We were so pleased with this product, we plan to purchase the 5-gallon container to stain our cedar privacy fence. We anticipate that this will make our fence look awesome and add additional life to that investment. October 7, 2014
Rated 5.0 out of 5.0 by Great Product We have used this product on our fences for years. It goes on well with either a sprayer or roller. Lasts for about 3 years and looks great. The color looks great on our cedar fence and garden shed. February 23, 2016
Rated 5.0 out of 5.0 by So far good product Used a sprayer to apply product, went on very easily and had good coverage. I put red cedar shakes on the front of my house, and used this product to prevent graying and to prevent ultraviolet damage. December 10, 2014
Rated 5.0 out of 5.0 by Excellent honey tone for outside cedar preservative. This stain and wood preservative is excellent for outside cedar wood products. It maintains a beautiful "honey" colored tone that is very pleasing. January 26, 2016
  • 2016-08-26 T13:49:26.635-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_23, tr_23
  • loc_en_US, sid_204322742, prod, sort_default
2 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 86ms
  • REVIEWS, PRODUCT