Model # 12325

Internet #204642359

Wolman 5-gal. Raincoat Tinted Natural Hickory Water Repellent Sealer
0037772123255

Discontinued Wolman

5-gal. Raincoat Tinted Natural Hickory Water Repellent Sealer

Frequently Bought Together

Product Overview

Wolman 5-gal. Raincoat Tinted Natural Hickory Water Repellent Sealer is a lightly tinted water repellent that protects wood from water damage. Imparts a sheer, wood colored matte finish in natural wood tones. Contains UV-blocking pigments that stop premature wood graying.

California residents: see   Proposition 65 information

  • Great water repellent and sealer for decks, porches, fences, boat docks, outdoor furniture, wood sheds, wood swing sets and most outdoor wood objects
  • Water-based formula will adhere to damp wood and dries fast
  • Lightly tinted finish contains UV-blocking pigment to stop premature wood graying
  • Covers approximately 750-1,000 sq. ft. on rough surfaces and 1,500-1,750 sq. ft. on smooth surfaces
  • Mildew-resistant coating film keeps wood free of mildew stain
  • Cleans up with soap and water
  • Online Price includes Paint Care fee in the following states: CA, CO, CT, MN, OR, RI, VT

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can I use this on deck previously treated with Cabots oil based stain and sealer?

Treated my deck five years ago with Cabots, it's mostly worn off by now. I'm in the mountains with snow, very dry air, hard on exterior wood.
Asked by: Jay
To ensure proper adhesion of Wolman Raincoat Water Repellent Sealer, surfaces must be clean, dry, and free of wax, grease, oil, shellac, lacquer, mildew, and polishes. Remove wax with a wax stripper, shellac, with a paint stripper, and mildew with a solution of 10% household bleach and water. Old finishes in poor condition should be removed. Sand using 80-220 grit sandpaper to obtain a smooth surface. Remove all sanding dust using a vacuum, tack cloth, or cloth dampened with mineral spirits. Prepare the surface with a cleaner and brightener. Follow manufacturer’s instructions. Splash water on dry, bare wood before applying this product to confirm the wood is properly prepared to absorb the sealer. If the water beads, puddles or is not absorbed, repeat use of a wood cleaner and test absorption again.
Answered by: Rust-OleumSupport
Date published: 2016-05-19

can you apply this product with a pump up sprayer

Asked by: doug
We strongly advise against applying Wolman RainCoat Water Repellent Sealer with a pump up sprayer. Apply using a good quality nylon/polyester bristle brush (preferred method), short nap paint/stain pad, roller with ¼” nap, or spray. (Do not use a pump sprayer). For airless spray application, use a .015- .021 inch tip and 100 mesh filter screen at 250-500 psi. Backbrush drips, runs or surface puddles when rolling or spraying. Always work from end to end on a few boards at a time and maintain a wet edge.
Answered by: Rust-OleumSupport
Date published: 2016-02-23
  • y_2017, m_5, d_23, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_204642359, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 127ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 101ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;