Worth Home Products 1-Light Brushed Bronze Instant Pendant Light Conversion Kit with Scavo Glass Shade-PBN-0302-0011 - The Home Depot

Worth Home Products

Model # PBN-0302-0011

Internet # 202654898

1-Light Brushed Bronze Instant Pendant Light Conversion Kit with Scavo Glass Shade

Worth Home Products 1-Light Brushed Bronze Instant Pendant Light Conversion Kit with Scavo Glass Shade

This item has been discontinued.
The Home Depot no longer carries this specific product.

$35.96 / each


Model # PBN-0302-0011

Internet # 202654898

Converts a recessed light into a hanging pendant light in minutes. No tools. No expensive rewiring or remodeling. The Instant Pendant Light makes for an easy and economical home improvement project.

  • Simple screw-in design, installing is as easy as changing a light bulb
  • Decorative ceiling plate hides recessed light & creates an energy-efficient barrier
  • Adjustable cord length from 8 to 48 in. change any time
  • Uses one 75 watt standard light bulb or CFL equivalent
  • ETL listed ensures the highest safety standards


Assembled Depth (in.)  5.5 in  Assembled Height (in.)  48 in 
Assembled Width (in.)  8 in  Fixture depth (in.)  5.5 
Fixture height (in.)  48  Fixture width (in.) 
Maximum Hanging Length (in.)  48 
Adjustable Lamp Head  No  Adjustable hanging length  Yes 
Bulb(s) Included  No  Collection Name  Instant Pendant Light 
Fixture Color/Finish  Brushed Bronze  Fixture Color/Finish Family  Bronze 
Hardware Included  Yes  Hardwired or Plug-In  Neither 
Included  Conversion Kit Included  Light Source  Incandescent 
Number of Bulbs Required  Pendant Type  Mini Pendant 
Product Weight (lb.)  3.5 lb  Recommended bulb type  A19 
Returnable  90-Day  Shade Color Family  Beige/Bisque 
Wattage (watts)  75 W 
Warranty / Certifications
Certifications and Listings  ETL Listed  ENERGY STAR Certified  No 
Manufacturer Warranty  1 Year 


Rated 4.8 out of 5 by 48 reviewers.
Rated 5.0 out of 5.0 by Pendant Light/Recessed Can Light Retrofit Kit All you do is screw in the adapter just as you would a light bulb; adjust the length of the cord and then push the cover plate up to the ceiling and tighten the nut. It was perfect for over my kitchen sink - brought the light down to where I needed it. I had a little bit of difficulty getting the cover plate to snug up to the ceiling, but when I checked the instructions, I found that all I needed to do was pull on the cord a bit and then push the cover plate up. October 22, 2014
Rated 5.0 out of 5.0 by Recessed lighting The recessed lighting conversion set looks great in our kitchen. The cord is easily adjustable for height. Like others have stated, the ceiling plate does take a bit of arm work to become snug and flush with the ceiling, but it was fine once we tightened the screw holding it in place. The drop wiring did have a small kink in it which has become less visible since we first installed it likely from the weight of the shade. It looks amazing now and I am entirely happy with my purchase. It totally changed the appearance of my somewhat dated kitchen to a more modern, tuscan look which I was aiming for. I highly recommend this product. September 16, 2014
Rated 5.0 out of 5.0 by Easy to install and looks great. The only negative I can say is that I wish it has a solid (metal wrapped) drop cord, but I understand that the lenght cannot be adjusted if this were the case. This product was so easy to install and is a great replacement for the can light over my kitchen island. July 10, 2013
Rated 5.0 out of 5.0 by Beautiful light, easy to install Super easy assembly. The only problem we had was..... We hung 2 next to each other in the kitchen and it was nearly possible to get them EXACTLY the same length. They look beautiful and definitely added a warm touch to the room. July 8, 2014
Rated 4.0 out of 5.0 by Pendant Light Conversion Kit I purchased two of these pendant lamps. Nice product; Looks good; Easy to install. After installation, one of the lamps failed to light. After dis-assembly, I traced the problem to an internally broken wire near a socket terminal. After cutting and trimming the wire, I soldered it to the brass rivet in the socket. Both lamps now work and are a very attractive replacement to the previous recessed lights. This was a defect that could not have been detected because there was enough contact initially for the lamp to light and the break was hidden. I would purchase again. January 17, 2012
2 3 4 5 6 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.