Model # 013541634

Internet #204491135

Store SO SKU #1000020470

Zamma Glenwood Oak 3/4 in. Thick x 2-1/8 in. Wide x 94 in. Length Laminate Stair Nose Molding


Glenwood Oak 3/4 in. Thick x 2-1/8 in. Wide x 94 in. Length Laminate Stair Nose Molding

$2998 /each

Frequently Bought Together

Product Overview

Glenwood Oak Stair Nosing is designed for installation on the edge of a stair tread. Stair nosing adds beauty to your home while absorbing much of the stair case traffic. Coordinates with laminate flooring, trim and moldings. The stair nosing provides a beautiful finished look to your home.

California residents: see   Proposition 65 information

  • Glenwood Oak Laminate Stair Nose Molding
  • 3/4 in. thickness x 2-1/8 in. width x 94 in. length
  • Item coordinates with 7 mm thick laminate flooring
  • Glenwood Oak, Light Color, Smooth Finish
  • Residential and commercial use
  • Appropriate Grade for Installation: Above Grade, On Grade or Below Grade
  • Can be installed over both concrete and wooden subfloors
  • Don't forget your coordinating moldings and trim
  • Clean with a damp cloth
  • All online orders for this item ship via parcel ground and may arrive in multiple cartons
  • Proudly manufactured by Zamma Corporation
  • Installation track included with purchase

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

how is this bull nose installed?

how much clearance should there be between the stripping and the actual floor on the top step?
Asked by: Buddy
Hello and thank you for your interest in this product. Position the floor 1-1/2 inches away from the edge of the stair. Included with the molding is a metal track and screws to secure it to the subfloor. The track will be positioned 3/16 of an inch away from the surface of the floor. It easily snaps to length as it is perforated every 4 inches. Once the molding is cut to length, it snaps into the track using a rubber mallet.
Answered by: TimN
Date published: 2016-05-09

reduce to 3m allure flooring

I'm using the allure LVT type flooring, I believe its only3mm thick will the stair nose and /or reducers work for this ?
Asked by: Rob
  • y_2017, m_5, d_23, h_6CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_2
  • loc_, sid_204491135, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 86ms

Customer Reviews

Glenwood Oak 3/4 in. Thick x 2-1/8 in. Wide x 94 in. Length Laminate Stair Nose Molding is rated 4.0 out of 5 by 4.
Rated 4 out of 5 by from Looks great and works well when installed properly Availability and installation instructions are the only downside to this nosing. It matches the floor I put in perfectly and works well. Here is what I learned on my installation: I had a 36" wide stair, the pieces are 94" long, so I was able to get 2 nosings out of each piece. FASTENING RAIL TO TREAD: 4 screws were provided with each piece, which weren't enough, the rail needed 3 screws on a 36" run to hold itself down. I put one in the center and then one about 8" to 12" in from each end. The first rail I put in only had 2 screws, one 12" in on each end and the center was lifting up slightly. I bought some #6 x 1" wood screws so I could put 3 in each rail. INSTALLING RISERS: Be sure the riser doesn't extend above the tread at all. I actually ended up holding my risers down about 1/16" to 1/8" below the top of the tread so that the nosing would lie tight to the treads. If the riser is flush and the tread piece is floating, it can cause the nosing to sit up a little bit higher than the tread. Not that noticeable, but it is easier if the riser is held down slightly. INSTALLING NOSING: Once the nosing it installed in the rail, it cannot be pulled back out of the rail without the part of the nosing that clamps in the rail separating from the nosing piece, so be sure it fits before fastening it in the rail. I had to pull the first piece I put in back up to trim the riser and make some other adjustments and it came apart. I ran wood glue along the top of the piece and then put weights on it for a couple of hours to make sure it sealed and it is fine, but be aware once it is in the rail, it will be difficult to remove it without having to repair it.
Date published: 2016-01-05
Rated 4 out of 5 by from Stair tread The stair tread was easy to install and matched the rest of the flooring.
Date published: 2015-04-14
Rated 4 out of 5 by from bit pricey for what it is Had to replace some as they do not last too long. Hopefully having the metal rail this time instead of the plastic they used to have will help them survive better.
Date published: 2014-04-29
Rated 4 out of 5 by from arrived earlier than I expected arrived earlier than I expected and I am glad to see it
Date published: 2014-05-20
  • y_2017, m_5, d_23, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_, sid_204491135, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 89ms