Model # 5000

Internet #205156868

Zinsser 5 gal. WaterTite Mold and Mildew-Proof White Oil Based Waterproofing Paint
0047719050001

Zinsser

5 gal. WaterTite Mold and Mildew-Proof White Oil Based Waterproofing Paint

$145.13 /each

Frequently Bought Together

Product Overview

Zinsser WaterTite 5 gal. Mold and Mildew-Proof Waterproofing White Oil Based Paint ultra low-odor formula designed to waterproof interior and exterior concrete. Waterproofing paint is guaranteed to stop up to 34 PSI of water pressure and prevents the growth of mold and mildew on the paint film for 5 years - guaranteed.

California residents: see   Proposition 65 information

  • Use on interior and exterior concrete and masonry surfaces either above or below grade
  • Lifetime waterproof guarantee and unique 5 year mold and mildew-proof paint film guarantee
  • Covers up to 375 sq. ft.
  • Bright white, non-gritty finish applies easily to dry walls with brush or roller
  • Prevents water seepage through cement, masonry and concrete block walls and basement floor slabs
  • Dries to the touch in 1 hour
  • Clean up with mineral spirits

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.

Specifications

Dimensions

Details

Warranty / Certifications

More Products With These Features

Search

Customer Questions & Answers

Can this be used in a bathroom to waterproof on an adjacent wall to a shower?

Asked by: JEV
I would use the latex version of this product in the bath
Answered by: Tom
Date published: 2016-10-19

Can this be used over painted concrete walls

Can this be used over painted concrete walls
Asked by: Davetheraven
Happy to clear things up, Dave! Rust-Oleum Zinsser WaterTite Mold and Mildew-Proof Waterproofing Paint is suitable for use over previously painted non-glossy surfaces. Please keep in mind, its waterproofing ability is then dependent upon the integrity of the previous coating. For best results, remove as much of the old coating as possible by manually scraping the surface, followed by thorough wire brushing. A belt sander with a 50 grit sanding belt is also effective. Exterior surfaces should be power washed or abrasive blasted to remove all loose and scaling paint and cement.
Answered by: Rust-OleumSupport
Date published: 2017-03-07

Can it be applied over wood? how about over asbestos tiles? have some mold in the basement and af...

Can it be applied over wood? how about over asbestos tiles? have some mold in the basement and after treating it with concrobium i'd like to pain over it to discourage future mold growth.
Asked by: Jon
This item can be used over wood.
Answered by: CommunityAnswer
Date published: 2016-10-28

can this product be used on a flat roof? or other product?

the roof has multiple layers; most recently coatings with 'Henry's Aluminized coating that keeps cracking with Michigan's heat /cold spent hours looking on web to figure...How about Drylok Extrme? but says best w/ cement...planned on using Zinsser primer first
Asked by: 4roofstressed
I would use an elastomeric product designed for a roof and more frequently than recommended
Answered by: Tom
Date published: 2016-10-19
  • y_2017, m_3, d_24, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_31
  • loc_, sid_205156868, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 16ms
  • QUESTIONS, PRODUCT

Customer Reviews

5 gal. WaterTite Mold and Mildew-Proof White Oil Based Waterproofing Paint is rated 4.4 out of 5 by 19.
Rated 5 out of 5 by from worked for us We had some seepage through our basement walls. The Dry Lok product had failed and was chipping off. We scraped of as much of the old finish as possible and applied this product. This first coat was not really easy to apply. We let it cure for about a week and applied a second coat which went on really easy. All the seepage is gone and the basement smells great. No odor from the paint or from mold. It looks brand new and very clean.
Date published: 2016-10-19
Rated 5 out of 5 by from Great product A friend used this for a project at his home and having seen the result I bought this product with complete confidence. Garage floors are always a challenge. This product was my solution and made my garage floor appearance so much better. I had a lite gray tint added for my project.
Date published: 2016-12-07
Rated 4 out of 5 by from cracks in spots after drying. requires 2 to 3 coats. stains easy from leaves on outside concrete ... cracks in spots after drying. requires 2 to 3 coats. stains easy from leaves on outside concrete wall and concrete steps. my final coat i will have the paint tinted gray so it will not stain so easy hopefully ? it is nice and thick sealer paint. it skins fast so do not work to long. you cannot touch it up until the paint drys for 24 hr. this paint sealer has stopped all the water leaks on the concrete walls, brick walls and concrete steps into the building. these steps are 200 ft long on each side of the building. they go up 3 floors. under these steps are mechanical rooms for the building. the concrete had small cracks causing water leaks, this paint sealer stopped it. i have used a premium brand latex cement sealer paint not sold in the big box stores and it failed in 1 to 2 years. i wanted to use an oil base paint because it works and lasts longer over latex. i told the salesperson at home depot i wanted oil based sealer paint for concrete steps and concrete walls. this product was offered to me to buy on line. after almost the project was finished i noticed on the paint can it said not for foot traffic. also zinsser says no also for foot traffic. home depot web site says nothing about foot traffic ! hopefully this paint holds up this winter. i started this project in july temps were 80-90 and the paint has not fully cured. still tacky deep down. it is oct 25 now. the nice thing about this paint it is not slippery when wet like latex paint. my final coat i will ad sharkgrip from h&c products to the paint on the steps to give more traction.
Date published: 2016-10-25
Rated 3 out of 5 by from This product does not stick to flex seal. If you have poured/formed concrete walls is a pain to ... This product does not stick to flex seal. If you have poured/formed concrete walls is a pain to get into all the imperfections in the walls using a 1" roller. Ensure you have a beefy handle and roller, I had to go out and purchase something stronger than what I had. They both wore out only with ~20 gallons applied. Without being able to spray the product (called manufacturer - they couldn't find specs to spray the product), it's hard to judge how water proof the product is with all the imperfections in the walls. I'm still working on the first coat, but it was a heavy coverage and still did not get into the various/many holes in the walls. They expect the second coat to cover better, I do not have such high hopes. I went over each spot at least 6 times to try ensure proper coverage.
Date published: 2016-12-05
Rated 5 out of 5 by from Outstanding product, much more versatile than DryLok if dealing with something other than bare co... Outstanding product, much more versatile than DryLok if dealing with something other than bare concrete (eg., previously treated concrete block), not much odor despite oil based, can use Zinsser 123 primer and put latex finish coat if desired
Date published: 2017-02-21
Rated 1 out of 5 by from Did not work. Was peeling off within 2 weeks. Walls were completely dry when applied and we app... Did not work. Was peeling off within 2 weeks. Walls were completely dry when applied and we applied 2 coats. Would never buy this product again.
Date published: 2017-02-07
Rated 5 out of 5 by from Excellent product Our unfinished basement had water seeping through the concrete floor. This product stopped the issue.
Date published: 2016-06-24
Rated 4 out of 5 by from Does the job but buy more than you think you need. The can says it covers 200 SQ ft. however the instructions say they require 2 coats. We thought we would need 2 gallons to do 2 coats but it ended up as 2 gallons that did not cover approximately 160 SQ ft. with 1 coat. It is extremely thick and very difficult to get into the porous holes of a poured concrete wall but I am happy with the results. I've only had it up for about 2 weeks but the damp smell is gone and the mold and mildew residue was completely covered with no bleed through. Note, we did scrub the walls about a week before with a vinegar and borax solution.
Date published: 2015-08-04
  • y_2017, m_3, d_24, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_, sid_205156868, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 17ms
  • REVIEWS, PRODUCT