Model # 63918

Internet #202184881

Zircon StudSensor EDGE Stud Finder

Discontinued Zircon

StudSensor EDGE Stud Finder

Frequently Bought Together

Product Overview

The Zircon Corporation StudSensor EDGE Stud Finder features a user-friendly interface and improved SpotLite Pointer System that shines a bright arrow-shaped beam on the wall to clearly identify the edge of the target.

  • Locates the edges of wood or metal studs up to 3/4 in. deep
  • Edge light indicates when the tool is over a stud edge
  • Ready light indicates when calibration has successfully completed
  • Over-the-stud indicator alerts the user to start the scan in a new location
  • SpotLite pointer system shines an arrow-shaped light on the wall to mark the target
  • Ergonomic design can be comfortably held in either hand at any angle
  • Note: product may vary by store
  • Great solution for all your detection needs


  • Click here for more information on Electronic Recycling Programs

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents.  Download a free copy from the Adobe Web site.




Warranty / Certifications

More Products With These Features


Customer Questions & Answers

1 Question1 Answer

Customer Questions & Answers

StudSensor EDGE Stud Finder
StudSensor EDGE Stud Finder

Ask your questions. Share your answers.

Clear Search Term
This question is from StudSensor EDGE Stud Finder
1 answer

how deep does it go

This question is from StudSensor EDGE Stud Finder
Asked by
Read all my Q&A
February 10, 2015
I have dry as thick as 5/8" and need a stud finder to go at least that deep
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answer (1)

February 10, 2015
The StudSensor EDGE can scan to a depth of 3/4 inch. If you need to scan deeper than that, a tool with DeepScan mode has twice the depth capacity and can scan up to a 1.5 inch depth. We hope this helps.
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
  • 2016-10-27 T13:27:17.366-05:00
  • bvseo_lps, prod_bvqa, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasquestionsanswers
  • loc_en_US, sid_202184881, prod, sort_default
1 of 1
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms

Customer Reviews

Rated 2.2 out of 5 by 61 reviewers.
Rated 1.0 out of 5.0 by Garbage Spend a few more dollars and get something that actually works. April 23, 2013
Rated 1.0 out of 5.0 by How to Find a Stud with this Product: Use Nails Instead, I did! I used the Zircon Studsensor Edge to find a stud(s) across an 18-inch section of wallboard. It either beeped like crazy or indicated a stud about every one inch. If I'd relied on the accuracy of this product, I would have had to account for a total of six studs placed about 1/8" apart when, in reality, I knew that there were no more than two (2) studs across the entire section of wall. I resorted to pounding nails into the drywall at every 1/4" and finally found the two (2) studs, both at either end of the section, and, here's the topping on the cake: in the two (2) places where the product never indicated! I am very disappointed in this product and plan to return it today. February 7, 2015
Rated 1.0 out of 5.0 by Inconsistant, unreliable, Bought this when we first bought our house in October and my only regret is that I didn't use it in time to take it back. First time I used it I made the mistake of trusting the first reading and put a hole in the drywall with no stud behind it. Second time I made sure to double check the readings and would not get a consistent reading twice in a row most of the time. Of course both of these instances were it the thing would calibrate at all as a lot of time it would just beep because it would not calibrate. Wound up getting frustrated with it and just knocked on the wall to listen for the stud, which was more accurate than using this tool. Don't waste your time or money. November 28, 2012
Rated 1.0 out of 5.0 by Never worked, not once I wish I'd read the reviews before purchasing. I was in HD already and remembered I needed one. I pick up the only one they had in stock, this one--big mistake. Bought 9V batteries and everything. Tried it on several walls because I thought maybe it was me; watched a how-to video just to double check. Nope. This is useless. May 17, 2015
Rated 1.0 out of 5.0 by Never worked, was a waste of money, home depot shouldn't carry this product. Never worked. Enough said.home depot shouldn't carry this product. May 13, 2015
Rated 1.0 out of 5.0 by Junk Had this for a few years now and finally tired of trying to use it. Junk that works just as well after I tossed it onto the concrete as it did before...that is to say, not at all. Half the time it will just beep at you indicating you miscalculated it somehow by using it exactly like you're supposed to. Sometimes it will detect something, sometimes it won't even in the same spot. Do not buy. January 15, 2015
Rated 1.0 out of 5.0 by Not working at all Bought this a while ago. After several attempts to find a stud I gave up. Green light is on always. There is neither a beeping nor a red light. It just does nothing. Invest your money in a product that works. Will never buy something from Zircon again. February 7, 2015
Rated 5.0 out of 5.0 by I got good buy on this item. I have never used a Stud Finder before but it was time to have one in my toolbox. First time I used it, it worked like a charm. i was real easy to use, ie. user-friendly. I like the arrow, shining on the wall, when you locate the stud edge. A well made unit, I must say. By the way, I first purchased a similar model, made by a good name (Stanley) but a bad product. It was returned. It just didn't work? So,I returned this one and bought a similar model, made by the Zirchon Corp. I'm sure glad I did! June 1, 2014
  • 2016-10-26 T14:27:46.957-05:00
  • bvseo_lps, prod_bvrr, vn_prr_5.6
  • cp-1, bvpage1
  • co_hasreviews, tv_61, tr_61
  • loc_en_US, sid_202184881, prod, sort_default
2 3 >>
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 60ms