GE 4 in. x 8 ft. Dryer Duct-PM8X73DS at The Home Depot


Model # PM8X73DS

Internet # 100050673

4 in. x 8 ft. Dryer Duct

GE 4 in. x 8 ft. Dryer Duct

This item has been discontinued.
The Home Depot no longer carries this specific product.

$10.99 / each


In Stock



Model # PM8X73DS

Internet # 100050673

The GE 4 in. x 8 ft. Dryer Duct f fits most gas and electric dryers. It features highly flexible aluminum construction to enable easy installation. The duct is fire-resistant and capable of withstanding temperatures up to 285 degrees Fahrenheit.

  • Fits most gas and electric dryers
  • 3 Layers of pure aluminum to offer flexibility
  • 2 Layers of polyester for added durability
  • Fire-resistant design is capable of withstanding temperatures up to 285 degrees Fahrenheit for reliable safety
  • 2 Clamps for easy installation


Appliance Type  Part/Accessory  Assembled Depth (in.)  4.50 in 
Assembled Height (in.)  8.5 in  Assembled Width (in.)  4.5 in 
Assembly Required  No  Brand compatibility  Fits most dryers 
Certifications and Listings  No Certifications or Listings  Color  silver 
Compatible Appliance Type  Electric Dryer  Manufacturer Warranty  *Limited 1 year warranty 
Number of pieces included  Product Depth (in.)  4.5 
Product Weight (lb.)  0.89 lb  Returnable  90-Day 


Rated 4.1 out of 5 by 35 reviewers.
Rated 5 out of 5 by Works great This duct is good quality and is expandable and flexible to fit anywhere. December 16, 2013
Rated 3 out of 5 by The Tube is fine...I hate the clamps I had to replace my tube because my crazy dogs ate the old one. The product (tube) by itself was fine. It was sturdy enough that, with a minimum of care, it didn't get destroyed in the process of puting it on. However, I personnaly HATE those clamps. I tried to connect it Christmas Morning and almost ruined my whole day. So, I used one of them on the duct going to the wall and out of the house which wasn't too difficult. However, to attach it to the exhaust on the back of my dryer, I purchased a clamp (from Home Depot for @ $3) that could be tightened and lossened with a screwdriver (like the ones on your hoses on your radiator in your car). I turned off the gas and tilted my dryer so the back was pointed up, fit the good clamp over the hose and put it on the dryer exhaust and tightened the clamp with my trusty screwdriver until it was good and tight and didn't move. Then I set my dryer back up normally and turned the gas back on (after tightening the gas link, of course). Everything works just fine now. So, if you don't mind using those clamps, then you don't need to purchase anything else. However, if you're like me you and hate the clamps that come with the product, do yourself a favor and spend the extra 3 bucks to get the screw-on clamp. January 14, 2014
Rated 2 out of 5 by difficult to clamp on I could not figure out how to attach the clamp. Cut myself snd was extremely frustrated. Would have preferred the screw on type. I need to get behind my dryer again, but I'm concerned that the clamp will pop off. Don't feel like dealing with it again. February 11, 2014
Rated 2 out of 5 by Stronger Quality, Clamps are not easy to use The clamps provided are difficult to use. I believe the quality of this duct is stronger than what we replaced; however, we are still experiencing the same problem with our dryer: loss of heat through the connectors. Our laundry room remains warm, so I know there is heat and energy escaping. We even upgraded to a 'T' collar connected to the dryer, which allows a better fit for the duct, but something still isn't right. October 7, 2014
Rated 5 out of 5 by Just what I needed I moved & the washer & dryer was pretty much in a closet now & the rigid ducting I had made the dryer stick out too much. This was flexable enough that I was able 2 push the dryer back & not crush it. The clamps worked great too. It held the duct in place when I pushed the dryer back. January 28, 2013
2 3 4 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.