Red Dot 2-Gang Switch/GFCI Weatherproof Cover-S419E-R at The Home Depot
Free shipping
Discontinued

Red Dot

Model # S419E-R

Internet # 100116089

Store SKU # 457464

2-Gang Switch/GFCI Weatherproof Cover


Red Dot 2-Gang Switch/GFCI Weatherproof Cover
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$12.16 / each
Item cannot be shipped to the following state(s): GU,PR,VI
Loading...

PRODUCT OVERVIEW

Model # S419E-R

Internet # 100116089

Store SKU # 457464

The Red Dot 2-Gang Switch/GFCI Weatherproof Cover protects wiring devices in dry, damp and wet locations. The box is made of die-cast aluminum with a silver metallic finish. Designed for use with 2-gang switch and GFCI device boxes, the cover mounts directly on a device for convenient installation and is UL listed for safety.

  • Protect wirings devices in dry, damp and wet locations
  • Made of die-cast aluminum with a silver metallic finish
  • Designed for use with 2-gang switch and GFCI device boxes
  • Mounts directly on a device with screws and gaskets (included)
  • UL listed for safety
  • Note: Product may vary by store.

SPECIFICATIONS

Assembled Depth (in.)  1.5 in  Assembled Height (in.)  5 in 
Assembled Width (in.)  5 in  Certifications and Listings  1-UL Listed,CSA Listed 
Color Family  Metallic  Electrical Product Type  Cover 
Manufacturer Warranty  NO  Material  Aluminum 
Number of Gangs  Package Quantity 
Paintable/Stainable  No  Product Depth (in.)  4.58 
Product Height (in.)  4.19  Product Weight (lb.)  0.2 lb 
Product Width (in.)  4.58  Returnable  90-Day 

CUSTOMER REVIEWS

Rated 4 out of 5 by 3 reviewers.
Rated 4 out of 5 by 2 gang switch cover The cover is a little tricky to put together when used with a 2 gang outdoor box. The trick is to put the gasket on the back of the cover then attach the switch to the back of the cover using the two spacers and screws that come with the cover. The switch must have the mounting ears removed also, then the wires can be attached to the switch. Then the trick is to turn the plate at an angle to allow the switch to fit between the top and bottom edges inside the box to get passed them. Once that's done straighten it up and mount the cover with the four remaining mounting screws. April 2, 2013
Rated 3 out of 5 by Did not fit switch. The switch cover did not fit on top of the switch. When screwed down tight the light switch would not work. I purchased a different kind (at Home Depot) and it fit perfect. January 17, 2012
Rated 5 out of 5 by Just what I needed Exact fit for defective cover plate I needed to replace October 5, 2011
1-3 of 3

SHIPPING AND DELIVERY OPTIONS

Cost Saver Shipping includes initial transportation by small parcel service, with final delivery made by U.S. Postal Service. Tracking information may be limited.


Orders for this item may be expedited for an additional fee.


Other Delivery Options:


Standard Shipping includes delivery by small parcel service. Processing time varies by product.


Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.