Rated 4.1 out of 5Â by 7
Rated 4 out of 5Â by ProfessorShadow Great Idea, but...
I believe the intent of the product is an easy cover to make your outlet cover blend in. Which they would earn a 5~Star.
The part where you bend the "Stiff" material over to cover the sides is a 50-50 proposition. Because the material is a bit thick I needed to add a touch of glue to hold the edges down.
September 30, 2014
Rated 3 out of 5Â by DIYer Difficult to use
As others have said, the adhesive is not of a good quality. Problem is that if you have used the tiles, you really do not have a choice for outlet covers. I taped them on the back. Top also bubbles, but a small slice w/ an exacto knife fixed that
July 22, 2014
Rated 5 out of 5Â by TT59 Fasade
The online installation video says that you can do a kitchen in 2 hrs. Maybe so if you install this product all the time and you did not and a lot of trimming to do (receptacles, plugs etc). That being said, the product is great and was easy to install. Just be careful and take your time and double check your measurements before cutting. I suggest using the adhesive (tube) rather than the adhesive tape.
February 20, 2011
Rated 5 out of 5Â by Rusty Finished the project right
These sheets are a perfect touch for covering a switch/outlet plate that is within a tile. I covered two plates and installed with new âSwitch Plateâ screws that are closer to matching the color of the material. I couldâve attempted to cover the screw head or paint it, but I thought that the new screws would work best for us.
This product is easy to use, cost effective vs. the alternatives and gives the backsplash a great finished look.
July 8, 2013
Rated 3 out of 5Â by Blonde slab of plastic
not an outlet cover. you need to make your own cuts.
February 20, 2014