QEP 1 HP Professional Wet Tile Saw with 7 in. Diamond Blade-60083 at The Home Depot
Free shipping
Discontinued

QEP

Model # 60083

Internet # 202065698

1 HP Professional Wet Tile Saw with 7 in. Diamond Blade


QEP 1 HP Professional Wet Tile Saw with 7 in. Diamond Blade
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$179.00 / each
Item cannot be shipped to the following state(s): GU,PR,VI

PRODUCT SOLD Online Only

In Stock

Loading...

PRODUCT OVERVIEW

Model # 60083

Internet # 202065698

The 60083 7-in. Professional Tile Saw with laser cutting guide is designed as a portable saw to handle any professional or DIY project where space prohibits the use of a large wet saw. Users will be surprised by the strength of it's true 1 HP motor with automatic thermal overload protection to prevent overheating. The power of this motor allows cutting through ceramic, terracotta, granite, etc. The water catch system not only reduces water run off but it recycles the water back into the reservoir minimizing fill frequencies. This is a very powerful addition to your saw line up at a very economical price.

California residents: seeProposition 65 information

  • UL approved, powerful, 1 HP, 6.25 amp, 120 volt, direct-drive motor
  • Makes accurate cuts with an adjustable angle and rip guide
  • Convenient, adjustable tilting table for precision 15, 30, and 45 degree miter cuts
  • Includes a 7 in. continuous rim wet diamond blade
  • Includes laser cutting guide for accurate cutting paths
  • Portable with convenient handle for easy transport
  • Open table top design provides unlimited tile size cutting for both rip and angle cuts
  • Online only, while quantities last
  • Residential use

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Amperage (amps)  6.25  Assembled Depth (in.)  23.2 in 
Assembled Height (in.)  10.4 in  Assembled Width (in.)  20.4 in 
Blade Material  Steel  Blade Thickness  .06 in 
Blade size (in.)  Cuts Through  Ceramic,Porcelain 
Deck material  Aluminum  Flooring Product Type  Tile Tool 
Manufacturer Warranty  1 year limited manufacturer warranty  Maximum tile cut size diagonal (in.)  18 
Maximum tile cut size rip (in.)  24  Product Weight (lb.)  38.5 lb 
Returnable  90-Day  Tile Saw Features  Laser Guide 
Tile Tool Type  Tabletop Tile Saws  Voltage (volts)  120 

CUSTOMER REVIEWS

Rated 3.2 out of 5 by 5 reviewers.
Rated 5 out of 5 by Tile Cutter This Tile Cutter works great! its very accurate and easy to use. I would recommend it to anyone doing their own home improvements! June 30, 2011
Rated 4 out of 5 by QEP 7" Pro Tile Saw The shipping to Mississauga was quick. The saw for the most part looks sturdy, but its actually light since the top is made out of aluminum. Will not rust. It also provides a nice even surface even for thinner cuts. I was missing two parts, but a quick call to home depot and they were on their way from the manufacturer. I found the saw blade included worked good for my application. I was cutting white marble and have not had any cracks. There were some vibrations at first but after loosening and slightly aligning the blade better on the bolt (1/20th of a mm change) it was perfectly centred and balanced. I read complaints about the blades in some of the cheaper saws. I tried to buy a better one but all the stores were out. Its a good thing I didn't because I had no problems with the included one. The drain hole plug did drip the first time I used it. Didn't the 2nd time. I did put a towel under it just in case. I was happy it was possible to use the saw upstairs in the hallway without messing everything up with splatter. There is a slight spray coming from the front. That's unavoidable, but I found placing a thin scrap piece on the tile prevented the fine mist from going further. The laser is useless. the water quickly gums up the beam. I also wish the rail would automatically align straight with the blade. You have to do that yourself each time. The rail free floats a couple degrees until its clamped down. It then sets to what ever you were holding it at. I also wish the angle on the lifting table was adjustable. its set to 45 and 22.5 degrees. Overall I'm happy, the saw is not perfect March 31, 2011
Rated 2 out of 5 by Tile saw The saw was good--made 40-50 cuts on 20 x20 porcelain tile The problems were the blade guard and the blade. The blade was so cheap it did not make it through one cut. The blade guard and laser are a joke. Could not use the guard because the tile would not go thru it--so I got soaked by the cooling water. I would look at a different saw April 24, 2012
Rated 1 out of 5 by Flawed To points to make, this would have been a great product if the Lazer guide was place correctly on the top. This plate should have been lowered into the table not on top. Makes cutting a step process. The screws that hold the Lazer guide and the metal shaft sit on top preventing a stop,so you have raise the tile to continue, which makes the design a flawed product. January 19, 2012
Rated 4 out of 5 by I recommend this cutter for home use I bought this wet cutter last year and works great for home projects, it is easy to clean and has a strong motor, The laser becomes useless as dirty water hits it, the aluminum guide can be difficult to align but If you plan on doing off and on projects, and are not to hung up these issues this unit is perfect, works great and priced right November 15, 2011
1-5 of 5

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


Orders for this item may be expedited for an additional fee.


Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.