RIDGID 14 in. Abrasive Cut-Off Machine-R4142 at The Home Depot
Free shipping


Model # R4142

Internet # 202201510

Store SKU # 428514

14 in. Abrasive Cut-Off Machine

RIDGID 14 in. Abrasive Cut-Off Machine

This item has been discontinued.
The Home Depot no longer carries this specific product.

$179.00 / each
Item cannot be shipped to the following state(s): AK,GU,HI,PR,VI


Model # R4142

Internet # 202201510

Store SKU # 428514

The RIDGID 14 in. Abrasive Cut-Off Machine features a 10 ft. cord for an extended reach on the jobsite. This cut-off machine has a large cutting capacity and can accommodate full bundles of metal studs. The 15-Amp, high-torque motor is designed for cutting through rebar, bar stock, angle iron and complete bundles of metal studs.

  • 15-amp, high-torque motor designed for cutting through rebar, bar stock, angle iron and complete bundles of metal studs
  • 3,900 RPM maximum cutting speed
  • 5 in. cutting capacity accommodates full bundles of steel studs
  • Arbor lock for easy, single-wrench wheel changes
  • Externally accessible brushes for easy brush changes
  • Tool-free mitre adjustment for quick and easy adjustment of the fence for most mitre angles
  • Adjustable fence rotates 45 degrees to the left and right for accurate mitre cuts
  • Heavy duty steel base - adds stability and is 56% lighter than previous model for easier transport
  • Vice clamp and quick-release lever for convenient clamping and stock adjusting
  • Clamping surface provides flat-edged surface that accepts clamping accessories (not included) for enhanced material support
  • 10 ft. cord length for an extended reach

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.


Amperage (amps)  15  Arbor Size  1 inch 
Assembled Depth (in.)  23.46 in  Assembled Height (in.)  18.11 in 
Assembled Width (in.)  15.16 in  Bench & Stationary Tool Type  Chop Saw/Cut-Off Machine 
Bench or Stationary  Bench  Blade Diameter  14 in 
Certifications and Listings  1-UL Listed  Color Family  Orange 
Cord Length (ft.)  10  Dust Collection Method  None 
Manufacturer Warranty  3 Year. Lifetime Service Agreement with tool registration  Maximum Cutting Thickness (in.) 
Maximum Speed (rpm)  3900  No Tool Blade Change  No 
Power Tool Product Type  Bench & Stationary  Product Depth (in.)  23.4 in 
Product Height (in.)  18.1 in  Product Weight (lb.)  69.6 lb 
Product Width (in.)  15.1 in  Reconditioned  No 
Returnable  90-Day  Table Length (in.)  19 
Table Width (in.)  11 


Rated 3.6 out of 5 by 21 reviewers.
Rated 3 out of 5 by Adjustments are difficult This saw is powerful enough to cut metal without bogging down too much. I find the cutting fence angle adjustment to be a nuisance because of the small spring loaded handle and indents. Each angle adjustment requires you to lift the handle to disengage the detents, turn it a small amount, release the handle whereupon the spring forces it to re-seat in a detent, and then repeat the process. This may be a safety feature but a pentagon knob or a 4 arm bar knob would be much more useful. Changing the fence location is also time consuming as there are only two locations (threaded holes) for the fence retaining bolt to go into. The retaining bolt is very close to the back of the fence forcing you to make multiple turns with the dinky flat wrench to extract the bolt and re-install it. The saw itself is acceptable but the difficulty in making layout changes will cause me to take a good look at other saws when it comes time to buy another. January 3, 2008
Rated 4 out of 5 by Great chop saw but ... Great and well build saw for ferrous metals only. You need to get an additional non-ferrous metal cutting blade for cutting aluminum, brass, copper and plastics. The big issue is with factory set angle bracket from 0-45 deg. either direction left or right. This bracket as set by the manufacturer won’t allow full range of movement up to 45 deg. It stops around 33 deg. because friction beyond this point. I have quickly learned that the adjustment you have to made is related to locking handle and a specially a split lock washer which needs to be adjusted. To fix this problem remove the small screw with spring and loosen the screw going to a T-nut underneath of the casting base. Now this bracket will travel all the way and pass 45 deg. Set to a position so split lock washer will hold the bracket with some force but when adding the L-handle will lock in position. You may play like this several times until you’ll find the exact setting. Finally lubricate those areas. This feature shall be improved and re-designed by the manufacturer. August 8, 2009
Rated 5 out of 5 by My Ridgid 14 inch cut off msaw works great! I really, really like my new Ridgid 14 in. cut off saw! I build/rebuild classic cars and fabricate metal pieces all of the time, and cut many different angles, shapes of metal pieces and this saw is ACCURATE and cuts with ease. January 25, 2007
Rated 5 out of 5 by ridgid man I have not found anything that I could not cut, this saw should be in every garage. March 13, 2007
Rated 1 out of 5 by Will not cut a true. Cons. As another user mentioned the fence isnt plumb it tilts forward, so if you try and cut any angle other than 90deg you cant use the clamp or you will get a skewed cut, the only way to make it cut true with miter cuts is not use the clamp and clamp the piece down to the table not the fence. I used this method for a day before i realized how ridiculous this was and packed it up, about to drive it back to Home Depot and swap it for the Dewalt. Pros. Seems great quality. The fence turns both directions which is a very nice feature. If only the fence was plumb would be the best chop saw I have ever used. January 6, 2013
2 3 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.