Eaton 60 Amp Type CH Spa Panel-CH60SPA at The Home Depot
Discontinued

Eaton

Model # CH60SPA

Internet # 202276011

Store SKU # 442462

60 Amp Type CH Spa Panel


Eaton 60 Amp Type CH Spa Panel
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$78.49 / each
Loading...

PRODUCT OVERVIEW

Model # CH60SPA

Internet # 202276011

Store SKU # 442462

The Eaton 60 Amp 4-Space 4-Circuit Type CH Main Breaker Spa Panel Load Center is intended for use as an outdoor spa panel. The load center has a 60 amp, double-pole, type CH GFCI that is pre-installed with a push-to-test button for peace of mind. The ANSI-certified and UL-listed panel features a copper buss for excellent conductivity and pre-installed neutral- and ground bars.

  • For use as an outdoor spa panel
  • Copper buss for excellent conductivity
  • 60 Amp , double-pole, type CH GFCI is pre-installed
  • GFCI has a push-to-test button for peace of mind
  • 4-circuit interior has 2 extra type CH, 120-volt circuits for convenience receptacles or lighting
  • Pre-installed neutral and ground bars
  • 120/240 volts
  • Door can be padlocked to prevent unauthorized entry
  • Door swings open and stays open for easy interior access

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Assembled Depth (in.)  13.0 in  Assembled Height (in.)  4.75 in 
Assembled Width (in.)  7.25 in  Certifications and Listings  1-UL Listed 
Electrical Product Type  Load Center  Indoor/Outdoor  Outdoor 
Load Center Type  Main Breaker  Load center depth (in.)  4.41 
Load center height (in.)  11.95  Load center width (in.)  6.60 
Manufacturer Warranty  Lifetime  Maximum Amperage (amps)  60 A 
Mounting type  Plug In  Number of Phases 
Number of Spaces  Product Series  CH 
Product Weight (lb.)  7.69 lb  Returnable  90-Day 
Voltage (volts)  120/240 

CUSTOMER REVIEWS

Rated 4 out of 5 by 4 reviewers.
Rated 5 out of 5 by Eaton Cutler Hammer 60 amp GFIC Panel The electrical ground fault interrupter panel is very well built and was easy to make the necessary electrical connection with #6 AWG wire. I used this for a spa (hot tub) installation and I used Teck 6-3 wire which was easy to install. The inside connection blocks are again well built and feel solid. Highly recommended. August 5, 2014
Rated 5 out of 5 by large box,easy to work in Great price for a 60 amp GFCI Hot Tub disconnect. Be aware this uses CH (Eaton comercial grade breakers) so if you intend to use the other 2 breaker locations in the box they will be more expensive. Bought this disconnect because my hot tub manufacter recomended Cuttler-Hammer (consumer brand of Eaton). August 13, 2013
Rated 4 out of 5 by The panel is well constructed and sturdy with handy knockouts. The only problem I had was the lack of room below the breaker to direct and connect the heavy wires required for the hot tub. April 10, 2012
Rated 2 out of 5 by It was recommended by spa manufacture but could not handle 6 gauge romex Item came with a a small portion of the breaker clip broken off but this did not have an effect on installation. The big problem was that the opening on the breaker were too small to fit 6 gauge wire. With much effort I was able to get the wires installed and so far the unit has worked fine. September 28, 2011
1-4 of 4

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.