Rated 4.5 out of 5Â by 32
Rated 5 out of 5Â by Sawtoothspanky light weight, low noise, low vibration
I bought this sander to replace the older Makita model that I had used for over 15 years. I can purchase parts to repair the older model, but I needed another one right away to finish projects I was working on. I decided since the Makita had been such a great product that I would stay with the Makita brand and buy the new model. The paper holders on the new model were redesigned, which was a concern for me but they seem to hold the paper just fine and I've already put it through the test. I recommend this product to anyone who needs a 1/4 sheet sander. This is a very reliable brand.
June 9, 2013
Rated 5 out of 5Â by Sawtoothspanky Light weight Low vibration, Comfortable.
I purchased this Makita Sander to replace it's older brother. Although I can order parts to repair it, I needed one right away to finish projects I had started on. This sander performs just as well if not better than the older model. Light weight, Low vibration and very comfortable to use. My only concern was the redesign of the paper holders. The older model has aligator teeth. This one has bars, but they seem to hold the paper just fine, and I've given it the workout. If you are in the market to purchase a finishing sander, I would recomend you buy this sander.
June 6, 2013
Rated 5 out of 5Â by TheGoat Fantastic little machine
This is by far the best palm sander I've ever owned and it was a steal at the sale price. This Makita sander is rugged and well built but also operates smoothly and is extremely easy to control. The dust collector works surprisingly well. I've used other brands which seemed to have the dust bag as a mere decoration. Not the case here. It works very well. The tension bars which hold the sandpaper on are thick and strong and won't bend like some other, only slightly cheaper brands. I've worked extensively with this sander for a few weeks now and have yet to find a fault. Excellent product from Makita.
November 24, 2011
Rated 5 out of 5Â by k2clk A real nice sander
I have had this sander for about a month and I just love it. There is very little vibration and it doesn't bounce around on the work surface like some other sanders. I am able to say that because I have tried just about every 1/4 sander out there. All of the sanders that I have tried, have their little quirks. Some of these quirks are very annoying while others drive you nuts and some just stop you from completing your job. I do a lot of scroll saw work and when I am finishing off a scroll picture or just about anything except for 3D work, I try and use a finishing sander on the flat surface. In the past there was only one sander that was gentle enough, had good dust removal, did not fatigue your hand and most of all was very durable. That sander is no longer made and I have been trying to find a replacement for that sander for the past 5 years, until now. Some people say that I am crazy for using a hand sander of a completed work, especially if it has take you a whole day to complete the design. One accidental grab or slip-up from the sander and you have just made wood for the fire place. So you need a sander that is gentle, easy to control, accurate and durable and I have finally found that sander again. There was only one other sander that came close to this one but in the end the paper hold downs were poorly constructed and needed constant replacement. There is one item that I should mention and that is that this sander does now allow you to connect a vacuum hose. For my type of work, the bag system that came with the sander is more than adequate. I have made a simple adaptor that allows me to connect a 1 1/4" vacuum hose but I don't use it. This sander has one very important feature that is so simple that I cannot understand why other 1/4 sanders do not have this feature and it has to do with dust collection. This sander comes with a plastic plate that you can hold in your hand or mount to your work bench. This little plate has plastic 1/4" pins that match up to the air inlet holes on your sander plate. All you have to do to put air inlet holes in your sandpaper is, take your sander with the sandpaper attached and push it against the plastic plate. You now have perfectly aligned holes in you sandpaper to suck in the dust, and thats that, simple yet very important. I know that this feature doesn't sound like a big deal but just try and find sandpaper for your sander with pre-made holes in it. If there are any noteworthy changes in the quality of this sander, I will be back with a revision to my present findings.
January 2, 2011
Rated 5 out of 5Â by Restorer My Top Ten List
A customer was next to me in the store and advised me
to get this sander. Armed with his spontaneous recommendation, I quickly purchased this sander and
had never sanded before. I have 3 pieces of furniture
that I have just acquired from my parents' passings, and
got home and started on the first one----boy was I surprised how easy and ergonomic this little sander is!
I am doing a heavy oak desk that had a ruined finish on
it and it is sanding it with such ease. I am amazed and
now know that that man in the store today was really an
'angel' in disguise. This is not an expensive tool either but
it is a workhorse. I can't wait to get to the other pieces of
furniture waiting to be restored now. I am thrilled with this
gadget more than I can tell you!!
November 7, 2011