Rated 2.5 out of 5Â by 2
Rated 3 out of 5Â by Stephen It's a aluminum tree bench around the tree
Installed this item for one of my clients. Very straightforward installation. It took me two hours to install it. Some things you need to know when installing:1. You going to need a large Phillips screwdriver, 10 mm socket wrench, and 10 mm wrench. 2. You must install this bench on a flat surface, if your surface is not flat the bench holes will not line up.3. Loosely install all the screws and nuts until the whole bench is installed where you want it, then go around starting with the bench bolts and tighten every nut making sure you do not over tighten because you can easily strip the bolts threads. That's about it, don't know how durable it is, will see.
July 8, 2012
Rated 2 out of 5Â by peter Small mistakes make for big pain
Decent product, but screws were just a bit too short. You could go to the hardware store and get a new set, or you could simply skip one of the washers where they suggest two. (I suggest skipping the flat and staying with the lock washers) If you get new ones they will not match the furniture and will look bad out unless you then paint all 48 heads. You see the picture; it's a small thing but extremely agravating!
January 3, 2012