Smarter Tools 135A Solid Wire and Flux Cored Welding Kit-STWD-MIG135KIT at The Home Depot
Free shipping

Smarter Tools

Model # STWD-MIG135KIT

Internet # 203003293

135A Solid Wire and Flux Cored Welding Kit

Smarter Tools 135A Solid Wire and Flux Cored Welding Kit

This item has been discontinued.
The Home Depot no longer carries this specific product.

$451.99 / carton
Item cannot be shipped to the following state(s): GU,PR,VI


In Stock



Model # STWD-MIG135KIT

Internet # 203003293

The Smarter Tools MIG-135 Welding Kit is the perfect choice to do projects and repairs around the home, farm and auto body shop. This MIG welder will produce a cleaner bead with less splatter than a regular flux core wire welder. The welder runs off of a standard 120 volt household outlet and produces an output range of 20-135 amps. It uses standard flux-core wire (E71-GS) or steel wire 0.6mm, 0.8mm in diameter and has 4 heat settings to easily adjust the output according to the thickness of metal you are welding. The welder can easily switch between gas-less flux-cored welding for deep penetration on thick steel or gas-shielded MIG welding on thin-gauge steel, stainless steel or aluminum. Package includes: MIG 135 welding power source, MIG torch with 7ft. (2.1m) lead, ground clamp with10ft. (3m) lead, 2 extra contact tips, a 1lb spool of flux wire, a 2lb spool of MIG wire, 0.6mm and 0.8mm (0.025 in. and 0.031 in.) drive roll, 0.9mm and 1.0mm (0.035 - 0.040 in.) drive roll, an adjustable gas regulator with a hose, ST-1S Auto-darkening welding helmet, gloves, users manual, and welding cart.

  • Wide 20 - 135 Amp welding output range is perfect for completing projects and repairs around the home, farm, or basic auto-body welding
  • Step-less wire speed control means more reliable welds
  • Thermal overload protection ensures lasting performance for years to come
  • Multiple voltage settings for a variety of materials
  • Tool-less Design for ease of use
  • Operates on a standard 120V/20A household outlet
  • 3/16 in. single-pass or 5/16 in. multi-pass welding capacity with flux-cored wire
  • Easily switches between gas-less flux-cored welding for deep penetration on thick steel or gas-shielded MIG welding on thin-gauge steel, stainless steel or aluminum


Assembled Depth (in.)  29 in  Assembled Height (in.)  21 in 
Assembled Width (in.)  13 in  Color Family  Silver 
Manufacturer Warranty  3 Year Limited Manufacture Warranty  Maximum amperage output (amps)  135 
Minimum amperage output (amps)  20  Power Tool Product Type  Welding Supplies 
Product Weight (lb.)  79 lb  Returnable  90-Day 
Torch included  Yes  Voltage (volts)  120 
Welder Type  Wire-Feed  Welding Supplies Product Type  Arc/Stick Welder 


Rated 3.6 out of 5 by 16 reviewers.
Rated 4 out of 5 by great for beginner welder I've never really done much welding before but with this set up it is pretty easy to learn. I really like it l, easy to use and good for the money everything you need is there except for the gas but they give you the hose regualter and the wire if you wanna mig weld. I gave it 4 stars instead of 5 because like some of the other comments say you do have to mess with the wire feed to adjust quit a bit and it needed more instructions to calibrate the wire feed at least for me I needed it but overall it seems like to be a good bang for your buck September 12, 2014
Rated 4 out of 5 by Lot of welder and accessories for the money..Great starter kit Overall a nice package. Out of the box it didn't feed wire, had to take the panels off and finally figured out that the fuse holder wasn't properly holding one end of the fuse. Once cinched up it works great. Super auto-darkening helmut provided. Side door to wire feed area doesn't close well and could be better designed. I bought a CO2/Argon tank and all is working well. I had to put in a 30 amp circuit into the garage for the welder but allowed me to add some other outlets as well. Satisfied with this purchase May 29, 2012
Rated 5 out of 5 by The135ASolid wire is a good welder for around the farm i've had mine for just about a year, and it's a little hard getting use to the setting, ( I was using a 3200 gas welder before were the setting were different, eaiser to use) but this welder, welds everything that I need it too, the weld's don't look like they did with the other welder, but I guess that will just take some more time. I'm happy I got this product, just don't give up I haven't. April 21, 2012
Rated 4 out of 5 by Great Value I've had no problems with the welder. It worked out of the box perfectly. I changed the standard 120 v, 3 prong plug to a heavy duty 30 amp rated twist lock. Other than that, it welds sheet metal and body panels fantastically using the MIG welder. To weld thick metal using the MIG, pushes the 120v capabilities, but it still welds solid. Flux core weld thicker pieces. Overall, great value. November 13, 2012
Rated 1 out of 5 by Takes time to calibrate to make the weld need. Have to adjust wire feed to much to calibrate weld start May 6, 2014
2 3 >>


Standard Shipping includes delivery by small parcel service. Processing time varies by product.

Orders for this item may be expedited for an additional fee.

Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.

If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.