Water Worker Digital Pressure Control for Well Systems-WWDPC at The Home Depot
Discontinued

Water Worker

Model # WWDPC

Internet # 203269517

Digital Pressure Control for Well Systems


Water Worker Digital Pressure Control for Well Systems
 

This item has been discontinued.
The Home Depot no longer carries this specific product.

$142.39 / box

PRODUCT SOLD Online Only

In Stock

Loading...

PRODUCT OVERVIEW

Model # WWDPC

Internet # 203269517

The Water Worker Digital Pressure Control for well water pump systems is designed to provide more constant pressure performance and well pump protection, all in one. One unit replaces a pressure switch, pump protector and pressure gauge. The constant pressure performance allows a 10psi differential for city like water pressure. Pump protection includes warnings rapid cycling, low water cutoff and improper voltage. Control has LED display for easy set-up and system error read out.

  • Made in the USA
  • Provides more constant pressure by allowing a 10psi differential. It is adjustable from 10 to 80 psi
  • Rapid cycle pump protection alerts user to possible issue with well tank before damage can be done to well pump by displaying E1 warning on LED display
  • Low suction alert warns user of the possibility of low well water levels, shutting the pump down and preventing the pump from burning out. Pump will shut off and restart every 60 minutes. If low levels persist, it will continue to shut down the pump. LED display will show E2 warning
  • Voltage protection feature will shut down the pump and restart when proper voltage is detected. LED display will show E3 message
  • Durable NEMA 3 enclosure. UL listed for pumps up to 2hp; can be used with motor controllers. Protected against line voltage noise and external interference. Sealed against bug infiltration
  • Fits new or existing systems. Spins onto most tank tees, no unions or extra fittings
  • Compatible with 115 or 230VAC systems. Pre-stripped lead wires and offset conduit holes. Familiar 4-wire configuration; remains idle if wired incorrectly
  • LED display rotates 180 degrees for easy viewing
  • Built tough for reliable performance
  • 2 year warranty
  • 2 year warranty

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

SPECIFICATIONS

Assembled Depth (in.)  4 in  Assembled Height (in.)  4 in 
Assembled Width (in.)  8 in  Brand compatibility  Water Worker 
Manufacturer Warranty  2 Years  Product Depth (in.) 
Product Weight (lb.)  2 lb  Returnable  90-Day 

CUSTOMER REVIEWS

Rated 4.5 out of 5 by 13 reviewers.
Rated 4 out of 5 by All in one product Though more than I wanted to spend, this all in one, space-saving, digital unit seemed like a good replacement to the old analog pressure gauge and pressure switch, and had added safety features. Easy to install, adjust and display readout, I like this product. Only problem I had that about 10 days after installing it, it died. Home Depot was very good about ordering me a replacement. The new one has been in and working fine for a month now -- so far so good! December 11, 2013
Rated 5 out of 5 by Easy to install - so far so good! My old pressure switch was getting less reliable as time went on and it was difficult to adjust it for a low differential pressure. I was impressed by this digital model because it allows you to set it to as low as 10 lbs differential which at higher pressures is barely noticeable. I also liked the fact that I could set the cut out pressure to 80 lbs. Our pump house is about 40 feet lower in elevation than the house so the pressure must be set high so we have decent pressure in the house. Installation was easy though I did have to change the plumbing a bit. This unit is quite a bit larger than my old diaphragm and spring operated control so it wouldn't fit in the same space. I just installed it today (Sept 11, 2014) so hopefully it will work for many trouble-free years. It should for the price paid! It was very easy to program. September 11, 2014
Rated 4 out of 5 by Nice quick boost in pressure I replaced my old pressure switch that had rusty contacts. this one was fairly sraightforward, I just had to tighten it on. It has a red LED pressure read-out, so technically I didn't need my old gauge anymore, but i left it there or I would have needed to plug the gauge hole. I will say that it made a huge difference with the water- my wife was like "whoa, that's good pressure!" Our old switch was like 50 psi and I set this one to 65 psi. If you are basic with toold you can probably do it in 30 minutes. I think the next time it would only be like 10 mins for me. October 23, 2012
Rated 5 out of 5 by Works great Before you replace an old gauge, make sure the pressure line is long enough for the new one. I had to make mine longer and it delayed the installation. After you install it, make sure the display is right-side up. By pushing two buttons simultaneously, the display can be rotated 180 degree. It is in the instructions, but easily overlooked. If the display is reading weird turn your head sideways or upside down (if you can) to see if it displays properly. If it does, rotate the display so it reads right side up. May 13, 2014
Rated 5 out of 5 by Easier to read than an analog gauge. This unit replaces an analog pressure gauge and a well pump pressure switch. You are able to read the tank pressure via the large, red digital numerals on top of of the unit. August 3, 2013
2 >>

SHIPPING AND DELIVERY OPTIONS

Standard Shipping includes delivery by small parcel service. Processing time varies by product.


Orders for this item may be expedited for an additional fee.


Other Delivery Options:

Express and Expedited shipping options are also available. Estimated arrival times are available in checkout.


If product is eligible for shipping to AK, HI and US Territories additional transit time and remote surcharges may apply.