Winchester 92.1 Percent AFUE 54,000 BTU Upflow/Horizontal Residential Gas Furnace

PRODUCT DESCRIPTION

Ideal for new or replacement residential or commercial installations. The 54,000 BTU Input WKG7S Series 92.1 percent efficiency residential gas furnace has a 34 1/2 in. tall cabinet and is designed for installation in up-flow and horizontal applications. This single stage, high efficiency furnace is natural gas ready and convertible to propane (LP Gas) with the optional GLP 028 conversion kit. All WKG7S furnaces are certified for Category IV venting and may be vented either through a side wall or roof applications using approved plastic as allowed by the National Fuel Gas Code. Features an electronic hot surface igniter for increased safety and efficiency, and adjustable 4 speed maintenance free direct drive blower that never needs lubrication, and self diagnostic control module to monitor operation. The primary heat exchanger is constructed of tubular aluminized steel and has a stainless steel secondary heat exchanger. Units are factory assembled, wired and tested to assure safe dependable and economic installation and operation. NOTE: Requires 1/2 in. input to gas valve, dedicated circuit breaker, and 120-Volt wiring with proper polarity and ground. Consumer product registration required within 60 days of installation for 10 year parts warranty and limited lifetime heat exchanger warranty. Dimensions: 34.5 in. H x 17.5in. W x 28 in. D. Not certified for mobile home use

• 100 Percent fired and tested on the manufacturing line to assure proper and efficient operation upon installation
• 30 second blower delay at start-up assures warm duct temperature at call for heat; adjustable blower off settings of 60, 90, 120, and 180 seconds
• Hot surface igniter for safe and efficient operation
• Color coded wire harness designed to fit the components, all with quick-connect fitting for ease of service and replacement
• Flexible category IV venting system may be vertically or horizontally vented using either a one-pipe or two-pipe system for maximum flexibility in installation
• Tubular aluminized steel primary heat exchanger and stainless steel secondary heat exchanger assures a long life
• Multi-speed direct drive blower motor is designed to a wide range of cooling capacities; switches on control board provide easy blower speed selection
• Self-diagnostic control board assures proper and safe operation and simplifies troubleshooting
• Two piece door design with captured screws hold door secure and prevents losing door screws
• BTU input of 54,000 and 49,700 BTU output
• Natural gas ready and may be converted in the field to LP using the optional GLP 028 conversion kit
• MFG Model # : WKG7SC054D24B
• MFG Part # : WKG7SC054D24B