Home Services
855-905-8329 855-905-8329

N-Hance Cabinet
and Floor Refinishing

Why N-Hance?

N-Hance wood refinishing is done at a fraction of the cost and time to do a full kitchen remodel, with most jobs done in 1-3 days. Using the U.V. Lightspeed™ process, the hardwood surface is instantly cured to a factory-like finish.

Expert Wood Renewal

The Home Depot’s hardwood floor and cabinet refinishing professionals are local, licensed, insured, and have undergone a thorough background-screening process before conducting a free in-home consultation.

Flexible Financing

We offer a wide range of flexible financing options to help renew your home’s wood surfaces including Home Depot’s Consumer Credit Card and Project Loan, plus one competitive price on any N-Hance wood refinishing project.

Cabinet & Wood Floor Refinishing

For a fraction of the cost and time of the full kitchen remodel, N-Hance's revolutionary wood refinishing service helps restore cabinets and floors back to their original brilliance and luster.

Cabinet Refinishing
Ratings and Reviews

Read reviews from customers just like you.

  • Overall Rating
18 Reviews
17 out of 18 (94%) reviewers recommend this service.
Sort Reviews By
Star Rating: Highest | Lowest
  • Overall
  • Customer service


Wonderful job from start to finish. We are pleased and happy with the overall job. The project took a few days but it was well worth it.

Yes, I recommend this service Verified Install

Review by

East Stroudsburg, PA
  • Overall
  • Customer service

Grate result

The new Silk color (very light) cabinet painting looks very nice and beautiful but there are some spots that did not 100% covered, even after touch up some area still show some dark spots. In general we are happy of the work.

Verified Install

Review by

  • Overall
  • Customer service

Very happy with outcome

The whole process exceeded my expectation. Kitchen looks beautiful.

Yes, I recommend this service Verified Install

Review by

Mountain View, CA, USA
  • Overall
  • Customer service

Looks good

Installers worked hard and did not make a mess. Their work was a great improvement.

Yes, I recommend this service Verified Install

Review by

  • Overall
  • Customer service

They look like new cabinets!

Our cabinets are 25 years old and looked terrible. Now they look like brand new cabinets! We also changed out the hinges and put beautiful knobs on the doors. They didn't have any knobs on them before. Now they look nicer and are easier to open. If your cabinets are in really bad condition and a light color wood, I recommend going a shade darker. This will hide any imperfections better; rather than keeping them the same light color.

Yes, I recommend this service Verified Install

Review by

San Pedro, Los Angeles, CA, USA

Frequently Asked Questions

Answers to common cabinet and hardwood floor refinishing questions

What is N-Hance?

N-Hance is a process that transforms wood floors and cabinets to like-new condition. The N-Hance process does not include sanding or the use of noxious chemicals; so when an N-Hance professional renews, repairs, and revitalizes your wood, there is No Dust. No Mess. No Odor.® Each N-Hance franchise is operated locally.

What kinds of wood products can be renewed with N-Hance?

The primary application for N-Hance is hardwood floors and wood cabinets. N-Hance professionals have also refinished doors, trim, and railings. Softwoods like pine and poplar can also be effectively renewed with N-Hance.

What types of floor refinishing services do you offer?

There a few different floor refinishing options available to you through N-Hance. A basic hardwood floor renewal will let your refinished floor shine like new again, but without the mess associated with a typical sanding. If your hardwood floors are worn down to the bare wood or have cross-grain scratches, a hammered floor renewal is the right refinishing service for you. Our technician can bring your hardwood floors back to life in just a couple days. Popular surfaces such as cork, bamboo and distressed floors cannot be safely sanded. For these floors, our non-sandable floor refinishing service is the ideal solution.

What types of cabinet renewal options do you offer?

For the most affordable cabinet renewal service, our basic renewal can return shine and luster to your wood cabinets by removing grease, dirt and by touching up any unsightly spots or blemishes. For a gentle change in the appearance of your cabinetry, a color shift will warm the tone of your cabinets. If you're looking to make a statement with color, a complete color change is the renewal choice for you. We can generally match any color or finish from our Design Center, and in 3-5 days, you'll have a brand-new looking kitchen at a very affordable cost.

How does N-Hance differ from other refinishing methods like sanding?

N-Hance uses a patented process and solution that eliminates the need to sand off an old finish or damage caused by water or time. Because the process is done with non-toxic solutions, there is no dust, no mess, and no odor. In most cases the entire process can be completed in one day or less.

The Wood Refinishing Process

Step 1. Prep and Detail

Your installers will mask and tape your job site, then remove cabinet knobs and pulls. For hardwood floor refinishing, they will vacuum, sweep and patch or fill in surface gaps.

Step 2. Deep Cleaning

Debris and dirt are removed. Cabinets are thoroughly cleaned down to the pores using our proprietary cleaning solution. Floor surfaces are buffered to draw dirt up from the pores and contaminates are removed.

Step 3. Apply Refinishing

Cabinet renewal installers will remove any contaminates or grain raise to ensure smoothness and the sealer is applied. Next, your color coats are either sprayed or hand-applied. For Color Shift and Color Change applications, two protective clear coat finishes are added. Floor refinishing installers apply sealer and burnish your floor. Next, they will apply two coats of our revolutionary finish.

Step 4. Inspection

You and your N-Hance wood refinishing expert will inspect the final job to ensure satisfaction

Step 5. Completion

Your cabinets and floors are ready! A team of licensed and insured professionals will install your new kitchen. Your installers will thoroughly clean up and escort you on a job site upon completion. Final walk through with the installer to ensure everything is installed to your satisfaction.

Refinishing Hardwood Floors & Cabinets

Ready to update the wood surfaces in your home? Look no further than N-Hance revolutionary wood refinishing. It’s a great way to bypass a demanding hardwood floor refinishing or cabinet renewal project and bring back that factory-installed look you love—in as little as one day!

Professional wood floor refinishing and cabinet renewal from an authorized N-Hance craftsman from The Home Depot is extremely affordable as well. That’s because we build on your investment by preserving your existing cabinets. The only thing that’s removed is years of grime and dirt build-up. Then scuffs, scratches, scrapes and sun-spoiled wear are filled, polished and buffed away. All the damaged areas are repaired or camouflaged. Your elegant finish is then applied and you’re left with beautiful, brilliant results.

And when you leave the job of cabinet renewal and floor refinishing in the hands of our N-Hance professionals, you can be assured of No Dust. No Mess. No Odor®. Disruptions, fumes and the hassles of traditional wood refinishing methods are essentially eliminated. And since you’ll most likely regain use of your room in as little as one day, the only thing left between you and the beautiful wood in your home is a call to The Home Depot.

The Home Depot Credit Options

The Home Depot Consumer Credit Card offers no annual fee, everyday special financing and exclusive Home Depot benefits.

There's also The Home Depot Project Loan. It offers affordable fixed monthly payments, a 6-month purchasing window and no prepayment penalty.

Get started with The Home Depot Credit Options

Benefits of a N-Hance Renewal

• Dust-free process

• Virtually odor free

• Highly trained and certified technicians

• A fraction of the price of alternative remodeling methods

• Quickly cures newly refinished wood with U.V. light

• Regain full use of your kitchen in 1-3 days

• Durable finish with the highest wear index

• Scratch resistance

• Full customer satisfaction guarantee