Installing a Wall Mount Light Fixture

Wall sconces and vanity lights are lighting fixtures that mount on vertical surfaces. They are primarily used for ambient and task lighting. Most wall fixtures attach to a ceiling box with a swivel strap so you can easily adjust the fixture. This project guide will show you the steps for a typical arrangement and give you a few tips for handling the more difficult ones.

Follow These Steps

Steps 1 - 3 of 3

Step One

Remove Existing Fixture

Turn off the power to the fixture. Test with a voltage meter. Remove the glass globe, shade, and bulb. Remove any nuts or screws holding the fixture in place. Carefully pull the fixture from the wall (pry if it has been painted in place); avoid yanking on the wires.

If the fixture is heavy, use a piece of rope or twine to hold the fixture up while you disconnect the wires. Twist off the wire nuts that connect the wires.

Step Two

Install the New Fixture

Strip 1/4" inch of insulation from the wire tips. Twist and connect wires: white to white, black to black, and copper to copper. Twist a plastic wire cap onto each connection. Fold the wires into the junction box, then place the fixture over the studs or nipple, then attach with the cover plate per the manufacturer's instructions.

Step Three

Install Globes & Bulbs

Install any globes or shades that go with your new fixture then install the bulbs. Restore power to the fixture and check to ensure it operates correctly. If something doesn't work properly, be sure to turn the power back off at the breaker before you remove the fixture and check your connections.

Steps 1 - 3 of 3

	*Required Fields
*E-mail Address:
*Password:

	Forget Your Password? Click here
	Create an Account

Enter Your Zip Code:

Installing a Wall Mount Light Fixture

Follow These Steps

Your Projects

Credit Center

Get It Installed

Moving Services

Tool & Truck Rental

Mobile Apps

DEPARTMENTS

ONLINE RESOURCES

OUR SITES

POLICIES

CORPORATE INFORMATION

MY ACCOUNT

HELP

CONTACT

FAQ

OPINIONS