Description:
Toolsync is the wireless way to integrate the on/off functions of power hand tools with a vacuum used for dust control. Start the tool and the vacuum turns on right away, even if it is across the room, around the corner, or on a different floor. This versatile system can be set it up so one power tool can operate several vacuums, or one vacuum can be activated by a number of tools. With ToolSync, you do not have to worry about throwing breaker switches. With other systems, when you combine the amp draw of the tool with that of the vacuum, you exceed 15 amps, and blow a fuse. A hand grinder pulls about 13 amps; a vacuum pulls about 11 amps. Together, they will blow a 15 amp fuse every time. The way ToolSync lets you operate higher amp tools without blowing fuses is by enabling you to plug the power tool in one circuit, and the vacuum in another. It is usually a simple matter of using sockets on opposite sides of the room. The wireless communication provided by ToolSync enables both tools to operate in synchronization without the need for an additional cord.