Replacing a Deck Stair Railing
Time Required: Over 1 day
Sturdy railings prevent deck mishaps, and your local code probably requires them.
This guide will teach you to safely replace a deck stair railing that may be damaged or improperly secured.
Tools & Materials
- Mark the existing rails’ position on the posts, and remove the damaged railing.
- Position the new rail against the inside of the stairway posts. Align the rail with the top rear corner of the top post and with the mark on the lower post.
- Have a helper attach the rail temporarily with deck screws.
Position the stairway rail flush against the top edges of the posts. Drill 1/8-inch pilot holes, then attach the rail to the posts with 2 1/2-inch deck screws.
- If the deck railing has a cap, measure and cut a cap for the stairway rail.
- Mark the outline of the post on the side of the cap, and bevel-cut the ends.
- Position the cap over the stairway rail so that the edge of the strip is flush with the inside edge of the rail. Predrill and fasten with deck screws.