How to Balance a Ceiling Fan

Help your wobbly ceiling fan regain some balance with these tips

1-2 hours

  
Fixing a wobbly ceiling fan is a small repair project that can head off what could become a hazard. While a small wiggle in a ceiling fan – up to 1/8 of an inch – is normal, any more than that can indicate a larger problem. Running a fan that is off balance can lead to inefficient operation and excessive wear on the fan motor. Ultimately, the fan might also pose a safety risk as it would be possible for parts to detach and fall off, or for the fan itself to fall. Performing some simple maintenance and a few checks can save you a bigger headache later on.

This project is not overly complicated, but it will require some patient ceiling fan troubleshooting, as there could be a number of sources for the problem. This guide will help you walk through the basic checks.
  

                   

What You Need

1
Clean the Ceiling Fan

Dust builds up on ceiling fans over time and can clog the fan motor in addition to putting pressure on the fan blades. Either of these problems can contribute to ceiling fan wobble; regular cleaning can help eliminate it.

• Turn off the ceiling fan and wait for it to come to a complete stop.
• Position a ladder under the ceiling fan slightly off center and climb up to reach the first blade.
• Use a duster to brush dust off the top and bottom surface of the fan blades.
• Lightly dampen a microfiber cloth with warm water and use it to clean the fan housing and wipe the blade surfaces.
• Use a cotton swab to clean the crevices of the ceiling fan arms.
• Dry all surfaces thoroughly with a fresh microfiber cloth.
• Turn on the fan and run it at medium and then high speed to see if the problem is solved.

Tip: Spin the fan in its normal direction of rotation as you work on the blades.

2
Check the ceiling fan structure

The overall support of the fan should be the first thing to check when on the hunt for a structural cause of wobble.

In order to be stable, a ceiling fan has to be installed on the correct ceiling mount: a fan-rated electrical box mounted to an adjustable fan brace or a 2x4 cross beam with lag screws. An electrical box that is designed for light fixtures only cannot support the added weight of the fan, and it will eventually loosen; the wobble you see may be a precursor to the fan giving way and crashing down.

You can usually loosen the bracket housing and take a look at how the fan is attached from the underside. You should be able to read the label on the electrical box and see the heads of the hex bolts attached to a wood or metal brace. Wiggle the bracket and tighten it up if it wiggles. Next, begin to look for loose fasteners in the other parts of the fan.

• Examine the hanger ball and be sure it is firmly seated in its groove.
• Tighten the downrod support screws.
• Replace the canopy cover and firmly tighten the screws.
• Check the switch housing to be sure it is securely fastened to the light kit. Make sure the housing sits flush and tighten the screws that hold them together.
• Turn on the fan and see if the wobble has stabilized.

3
Examine the ceiling fan blades

Over time, ceiling fan blades can begin to droop slightly, especially if the fan is installed in an area of the home with high humidity or subject to temperature fluctuations. This can be a large factor in the fan’s instability and contribute to ceiling fan noise.

• Use a tape measure to measure the vertical distance from the ceiling to the tip of each ceiling fan blade. 
• If all of the measurements are not the same, adjust the blades that are off by tightening the mounting screws that hold them to the motor housing.
• If the screws are tight, you may need to gently adjust the blade arms, or irons—the decorative metal holders attached at the end of the blade. They may be slightly bent which could account for variances in blade height.
• Examine each of the fan blades to be sure they are not warped.
• Replace any blade that appears damaged. For convenience, replace or upgrade ceiling fan arms at the same time as you replace the blades.

When selecting new ceiling fan blades, be sure that they are compatible with your fan type and model number so that they are of similar length, width and weight as your old blades. Blades that are too heavy will strain the fan motor and wear out the fan more quickly. Blades that are too short or too light will not move the air effectively.
 
Most ceiling fans have a replacement parts list available as a PDF that will direct you to the correct replacement blades. Check the fan's product information page on The Home Depot web site under the Info & Guides section. You can identify the model of your ceiling fan by referring to its user manual. If the manual is not available, check the top of the ceiling fan motor housing for a label containing the information.

4
Apply a fan balancing kit

A ceiling fan balancing kit usually is packed in with a new ceiling fan, but they can also be purchased separately. Kits come with a plastic clip and up to five small weights, often with an adhesive backing to make them easy to attach to the fan blades.

• Attach the plastic clip from the kit to one blade about halfway up its length, then turn on the fan to see if the instability has improved.
• Turn the fan off.
• Repeat for each blade until you’ve located the problem.
• After you find the problem blade, slide the clip along the blade toward the end about an inch at a time and recheck for improvement after each adjustment.
• Once you find the position that offers the most stability, position one of the balance weights in the center of the fan blade, parallel to the clip.
• Stick or glue the weight in position, then remove the clip.

5
Replace the ceiling fan

If your ceiling fan is over 10 years old, it may have started to develop mechanical issues. If you subject your fan to heavy usage, these issues may come up even sooner. Beyond the wobble, there are other signs to look out for that may indicate your ceiling fan is ready to be retired:

• Fan is slowing down
• Buzzing sounds coming from the motor
• Squeaks that persist even after proper fan maintenance

If problems persist, you may want to have the fan professionally serviced. However, if your fan is older, it may simply be time to replace it. See our guide, How to Install a Ceiling Fan to get tips on successfully replacing your old ceiling fan with a new model.