Use the ½ in. distribution tubing to transport water directly to your plants. Works as a supply line to an emitter or a feeder line branching off larger tubing or pipe. Another use is to punch emitters directly into the side of the tubing to deliver water along the way. The ½ in. tubing features an outside diameter (OD) of 0.620 in. & internal diameter (ID) of 0.520 in. While other manufacturers use blended recycled material to construct their entire tubing, Raindrip poly tubing has a unique layering method using 100% virgin content for the outer and inner layers for a more durable product, and middle layer of recycled content. Drip irrigation systems are easy to customize, install, and operate. As part of a complete system, the supply tubing transports water to the area to be irrigated. Drip irrigation gradually and evenly waters the root zone of your plants, keeping it moist but never saturated with water. Your plants maintain the ideal balance between water and air for optimal growth and overall health. Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972. Build, expand, or repair your system with our rigorously tested products designed to save you time and money. Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success.
- Use in a variety of ways: as a main supply line connected to a low-flow, drip-watering device; as a feeder line that branches off larger tubing or pipe; and with emitters punched into the tubing to deliver water along the line
- Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
- Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in.; connects to point-of-connection device using appropriate fitting; emitters and feeder lines can be punched directly into the line or attached to the end
- Poly tubing is constructed using a layering method for durability: the outer layer, which is exposed to the sun, and the inner layer, which is exposed to water, is made of 100% virgin content; the middle layer is composed of recycled content
- Works with Raindrip products and other products with compatible connection type
- Comes with one 200 ft. coil of 1/2 in. poly supply tubing
- To use as a main supply line, attach to a point-of-connection device connected to the water source; to use as a feeder line, connect to the main line with a fitting; to use as a dripper line, attach emitters directly into the line
- Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting
- Tubing is made of polyethylene using a combination of virgin and recycled content treated with UV inhibitors to prevent fading and cracking.
- Use with a pressure regulator and filter connected to the water source
- Use with low-flow, drip-watering emitter at end or inserted along the line
- Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
- Raindrip components and kits are available at major home centers, retailers, and online. Check out the Raindrip website or reach out to us for technical support. Our friendly, experienced team is here to help make your project a success
- Raindrip is a leading manufacturer of drip and micro-irrigation solutions and the trusted brand of landscapers since 1972, offering a full range of rigorously tested products designed to save you time and money