#1 Home Improvement Retailer

Internet #204281780

Model #801820

Store SKU #721789

1/4 in.-28 Zinc Plated Hex Nut (50-Pack)

  • Easy to install with a wrench
  • The most widely used nuts available
  • Quick disassembly for repairs and maintenance
  • See More Details

Frequently Bought Together

+
+
Price:

Product Overview

Hex nuts are widely used in construction and to create a bolted joint. They are available with coarse or fine threads. Use with a screw or hex bolt to create a strong connection.
  • Used to connect both metal and wood components
  • Made from zinc plated steel for durability
  • Use a 7/16 in. socket or wrench to tighten
  • Includes 50 pieces to complete your project
  • Fine thread
  • Buy by the box and save

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar Hex Nuts

1/4 in.-28 Chrome Hex Nut (4-Pack)
current product
1/4 in.-28 Zinc Plated Hex Nut (50-Pack)
1/4 in.-20 Zinc Plated Hex Nut (100-Pack)Top Rated1/4 in.-20 Zinc Plated Hex Nut (100-Pack)
BrandEverbilt EverbiltEverbilt
Name1/4 in.-28 Chrome Hex Nut (4-Pack)1/4 in.-28 Zinc Plated Hex Nut (50-Pack)1/4 in.-20 Zinc Plated Hex Nut (100-Pack)1/4 in.-20 Zinc Plated Hex Nut (100-Pack)
Price
Ratings
(1)
(238)
(238)
(137)
Fastener Thread TypeFineFineCoarseCoarse
Finish FamilyChromeZincZincZinc
Measurement StandardUNFUNFUNCUNC
Size1/4 in1/4 in1/4 in1/4 in
Fastener PlatingChromeZincZincZinc
Thread pitch28282020
MaterialSteelSteelSteelSteel
View ProductView ProductView ProductView Product

Specifications

Dimensions

Assembled Depth (in.)
0.43 in
Assembled Height (in.)
0.50 in
Assembled Width (in.)
0.22 in
Inside Diameter
0.25 in
Outside Width (in.)
0.44 in

Details

ACQ Rated Fastener
No
Fastener Callout Size
1/4 in.-28
Fastener Plating
Zinc
Fastener Thread Type
Fine
Fastener Type
Hex Nut
Finish Family
Zinc
Grade
Grade 2
Material
Steel
Material
Steel
Measurement Standard
UNF
Pack Size
50
Product Weight (lb.)
0.02 lb
Returnable
90-Day
Size
1/4 in
Thread pitch
28

Warranty / Certifications

Manufacturer Warranty
None

Questions & Answers

18Questions21Answers

Is this product USA made

Asked by Steve March 25, 2021
1
Answer

Currently the 1/4 in.-20 Zinc Plated Hex Nut (100-Pack) is manufactured in China.

Are these in compliance with IDC section 2304 .10.5.

Asked by Jim December 30, 2019
1
Answer

Yes, this hex nut is in compliance with IBC 2304.10.5 and ASTM standards.

Is the inside diamter one inch. All the specs say one inch, obviously wrong. But is the inside di...

Asked by HDLoews October 3, 2019
3
Answers

This is a hex nut for a 1 inch galvanized threaded rod. It is designated 1-8 because there are 8 threads per inch. I don't know the exact ID, but it fits a standard 1 inch machine thread, with galvanizing. Sometimes, a regular (ungalvanized) hex nut will not fit on a galvanized threaded rod, depending on the thickness of the galvanized coating, so it's best to use galvanized nuts on galvanized threads.

Is it still 1 nut per box?

Asked by ASB August 23, 2019
4
Answers

Nah. Deez nuts are in packs of 25

what grade is this nut

Asked by deogee1 May 16, 2019
2
Answers

Grade 2

So there is 1 nut in the box. Really!

Asked by smokeonthewater April 15, 2019
2
Answers

No, there are 20 in each box

Are these grade 5, or 2?

Asked by ToolNut November 10, 2018
1
Answer

This hex nut is grade 2.

What is the thread pitch?

Asked by ToolNut November 6, 2018
1
Answer

This Hex Nut is 7/16"-20, thread pitch is 20.

How many are in a box

Asked by TCC October 9, 2018
3
Answers

25 nuts

How much does the box of 100 weigh?

Asked by Gerry August 5, 2018
3
Answers

Not quite 1.5 lbs

1/4 in.-28 Zinc Plated Hex Nut (50-Pack) - page 2

Customer Reviews

  • 4.8
    out of 238 reviews
  • 98% recommend this product
Filter by:
Showing 1-10 of 238 reviews
Excellent for my purposes. This is how I used...
Excellent for my purposes. This is how I used these stainless steel nuts.
by VERONIKA
I purchased these stainless 1/4'' nuts over a year ago to go with 2'' stainless bolts to secure D...
I purchased these stainless 1/4'' nuts over a year ago to go with 2'' stainless bolts to secure D-rings on my utility trailer for tie downs. These stainless nuts have held up well over time sitting outside in the weather and have provided a strong point to secure cargo. I do not have any dislikes for this product. Please give a thumbs up if this was helpful.
by RM33
2 people found this helpful
They did the job. They are holding together supports for an outdoor 6x6 treated lumber structure...
They did the job. They are holding together supports for an outdoor 6x6 treated lumber structure. Too early to tell if they stand the test of time, but they appeared to be good quality.
by esb
These spun on easily to Home Depot galvanized 1/2-13 NC...
These spun on easily to Home Depot galvanized 1/2-13 NC bolts holding a sunroof to a Ford 2000 farm tractor ROPS frame
by HomeDepotCustomer
We used galvanized nuts on a ledger board installed under our home. The ledger board hold steps ...
We used galvanized nuts on a ledger board installed under our home. The ledger board hold steps that are exposed to weather and water can sometimes seep down. Using galvanized nuts will slow any rust that may occur from moisture. I buy my easterners in bulk rather than a few at a time. It is more convenient and saves money. It is nice that our Home Depot keeps a good stock on various types of fasteners.
by mixerdude
2 people found this helpful
This offering from Everbilt is a fifty unit per box supply of one-half inch very nice quality gal...
This offering from Everbilt is a fifty unit per box supply of one-half inch very nice quality galvanized steel nuts, in 13 threads per inch “course” size. If you are working with cut it yourself lengths of half inch continuous thread steel rod, also available in several lengths from Home Depot, or a large number of standard size bolts, you are going to use a more than a few of these threaded half inch nuts, so the economy of this bulk package is attractive. The weight bearing capacity is impressive. They are heavily galvanized, assuring a long service life even in high humidity area use, and the high corrosion resistance means adjustments and even disassembly should not be a problem, as long as you select bolts and other hardware for them of the same quality. The box describes the contents as “course”. Don’t be fooled by this, as the term refers only to the industry standard designation of 13 threads per inch being in the “course” rather than the “fine” thread category, which has more threads per inch, but is not necessarily a better choice for general and high load bearing applications. Never guess, always evaluate your actual needs and carefully select hardware rated for it. This product promises high reliability and long service life. Fifty of these in one place has a bit of weight, so it is appreciated that they come to you in an appropriately strong but small cardboard box with positive closure, to keep them where they belong in transit and on your storage shelf. This is an excellent choice , and I am more than pleased with it.
by Bill
These half inch coarse thread galvanized steel hex nut came with fifty pieces in the box which was more than enough to complete the deck project. Galvanized nuts and bolts work great for treated lumber to prevent staining. My first thought was, “How did fifty nuts fit in such a small box?”, but they do. After all the kidding was said and done we got to work!
by Yukoneric
1 person found this helpful
The quality, consistency and the overall appearance of this product were just what I needed for m...
The quality, consistency and the overall appearance of this product were just what I needed for my project.
by PhotoNut
Rating provided by a verified purchaser...
Rating provided by a verified purchaser
by HomeDepotCustomer
by HomeDepotCustomer
Showing 1-10 of 238 reviews