A: This is a rustic rough sawn board and the thickness may range from 3/4 " thick to 7/8" thick. Most of the boards tend to run on the thicker side, so closer to 7/8" thick.
A: 3/4. If you want 1" you need to go to a lumber yard or mill
A: Untreated, but pine will rot quickly and be eaten by beetles for that application
A: Yes, the boards are untreated.
A: Dont order this particular board, get S2S
A: Hi Joe, I would advise you visit or contact your local Home Depot store for further assistance from a specialist in your area. Please follow the steps below to localize your Homedepot.com: 1. Localize Homedepot.com using your zip code (My Store Location: Change) 2. Choose the store where you want to pick up the item (Make this my Store) We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
A: If you only need one side exposed, OK, but these S1S boards will likely have several knots that will be difficult to stain or paint. MUST use primer over knots like Bin Primer
A: This is a rough saw pine board, it would be better to use a pine board that has been sanded on all 4 sides.
|Name||1 in. x 4 in. x 8 ft. S1S2E Standard Band Sawn Eastern White Pine Board||1 in. x 6 in. x 6 ft. Premium Kiln-Dried Square Edge Whitewood Common Softwood Boards||1 in. x 6 in. x 8 ft. Premium Kiln-Dried Square Edge Whitewood Common Softwood Boards Board||1 in. x 4 in. x 8 ft. Select Kiln-Dried Square Edge Common Softwood Whitewood Board|
Buy 10 or more $7.93
Buy 10 or more $8.68
Buy 10 or more $11.50
Buy 10 or more $12.92
|Nominal Product Length (ft.)||8 ft||6 ft||8 ft||8 ft|
|Board Joint Type||Square Edge||Square Edge||Square Edge||Square Edge|
|Coverage Area (sq. ft.)||2.6 sq ft||2.9 sq ft||3.66 sq ft||2.33 sq ft|
|Nominal Product Thickness (in.)||1||1||1||1|
|View Product||View Product||View Product||View Product|