Model # 165360

Internet #202076422

Store SKU #165360

2 in. x 2 in. x 8 ft. Furring Strip Board
0621241202086

2 in. x 2 in. x 8 ft. Furring Strip Board

  • Meets the highest grading standards for strength and appearance
  • Used to establish an air space for insulation or shingle projects
  • Furring strips boards are for interior or exterior use
$207 /each
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Installation Options

Product Overview

  • Meets the highest grading standards for strength and appearance
  • Used to establish an air space for insulation or shingle projects
  • Furring strips boards are for interior or exterior use
Every piece of 2 in. x 2 in. x 8 ft. Furring Strip Board is perfect for a wide range of uses including carpentry, hobbies, shelving and general finish work. Create a level surface for attaching wallboard and paneling. Establish an air space- perfect for masonry, insulation, and cedar shingle projects. With its easy to glue, good nailing and screw holding properties, this product meets the highest grading standards for strength and appearance. Its straight grain and uniform texture has low shrinkage and is easy to work by both hand and machine tools.
  • Strip is used to give a level surface for attaching wallboard, paneling, etc.
  • Each piece of this lumber meets the highest quality grading standards for strength and appearance
  • Kiln dried for extra stability (KD/HT)
  • Interior or exterior use
  • Common: 2 in. x 2 in. x 8 ft; Actual: 1.375 in. x 1.37 in. x 96 in.
  • Weighs approximately 4 lbs.
  • Untreated standard lumber
  • Square footage coverage: 0.92 sq. ft.
  • Note: product may vary by store
  • Click to learn how to select the right lumber for your project

Product Overview

  • Meets the highest grading standards for strength and appearance
  • Used to establish an air space for insulation or shingle projects
  • Furring strips boards are for interior or exterior use
Model #: 165360
Sku #: 165360
Internet #: 202076422

Every piece of 2 in. x 2 in. x 8 ft. Furring Strip Board is perfect for a wide range of uses including carpentry, hobbies, shelving and general finish work. Create a level surface for attaching wallboard and paneling. Establish an air space- perfect for masonry, insulation, and cedar shingle projects. With its easy to glue, good nailing and screw holding properties, this product meets the highest grading standards for strength and appearance. Its straight grain and uniform texture has low shrinkage and is easy to work by both hand and machine tools.

  • Strip is used to give a level surface for attaching wallboard, paneling, etc.
  • Each piece of this lumber meets the highest quality grading standards for strength and appearance
  • Kiln dried for extra stability (KD/HT)
  • Interior or exterior use
  • Common: 2 in. x 2 in. x 8 ft; Actual: 1.375 in. x 1.37 in. x 96 in.
  • Weighs approximately 4 lbs.
  • Untreated standard lumber
  • Square footage coverage: 0.92 sq. ft.
  • Note: product may vary by store
  • Click to learn how to select the right lumber for your project

Compare Similar

Price
$2.09 /each
$2.70 /each
$2.70 /each
$2.70 /each
Name 2 in. x 2 in. x 8 ft. Furring Strip Board 2 in. x 3 in. x 8 ft. Pet 96 in. SPF Kiln Dried HT #2 PREM PW Untreated Lumber Copy 2 in. x 3 in. x 96 in. Select Kiln Dried Whitewood Stud 2 in. x 3 in. x 8 ft. Stud and BTR Western Wood KD Stud
Brand Sierra Pacific Industries
Ratings (36) (6) (10) (1)
Nominal Product Length (ft.) 8 8 8 8
View Product View Product View Product View Product

Specifications

Dimensions

Actual product Length (ft.)
8
Actual product thickness (in.)
1.5
Actual product width (in.)
1.5
Nominal Product Length (ft.)
8
Nominal Product Thickness (in.)
2
Nominal Product Width (in.)
2

Details

Fastener recommendation
Nails, Galvanized Nails, Screws, Construction Adhesives
Features
Paintable,Stainable
Lumber Grade
No. 2 & Btr
Material
Wood
Moisture content
KDHT
Texture
Smooth

Warranty / Certifications

Manufacturer Warranty
See store for details

Specifications

Dimensions

Actual product Length (ft.)
8
Actual product thickness (in.)
1.5
Actual product width (in.)
1.5
Nominal Product Length (ft.)
8
Nominal Product Thickness (in.)
2
Nominal Product Width (in.)
2

Details

Fastener recommendation
Nails, Galvanized Nails, Screws, Construction Adhesives
Features
Paintable,Stainable
Lumber Grade
No. 2 & Btr
Material
Wood
Moisture content
KDHT
Texture
Smooth

Warranty / Certifications

Manufacturer Warranty
See store for details

Questions & Answers

Is it strong enough to support a desk (using it as legs)? What about a coffee table (using it as ...

Is it strong enough to support a desk (using it as legs)? What about a coffee table (using it as legs again -- see picture)?
Asked by: Reka
Yes they can hold that weight. Actually, I used these for load bearing walls for a bearded dragons house, 24 inches tall x 24 inches wide x 4 feet long. had a 300 lb turtle tank on top, how ever 300 lbs / 10 furring strips as vertical load bearing support is only 30 pounds each and if you check the density of pine, it takes a lot more then 30 pounds vertical load on the end [ compression weight ] to cause a failure of the furring strips [ 3,511 lb/in2 for pine ] . I used a custom green plexi glass door with a dragon etched into it. Further description : - Simplified description of the structure of wood, comparing it to a bundle of thin-walled drinking straws. Parallel to their longitudinal axis, the straws (wood cells) can support loads substantially greater than their weight. the density of most species is between 20 and 45 lb/ft3 Compression Wood can be subjected to compression parallel to grain, perpendicular to grain, or at an angle to grain. When compression is applied parallel to grain, it produces stress that deforms (shortens) the wood cells along their longitudinal axis. Recalling the straw analogy discussed in Section 3.2, each cell acts as an individual hollow column that receives lateral support from adjacent cells and from its own internal structure. At failure, large deformations occur from the internal crushing of the com­plex cellular structure. The average strength of green, clear wood speci­mens of coast Douglas-fir and loblolly pine in compression parallel to grain is approximately 3,784 and 3,511 lb/in2, respectively. source timber for bridge building manual http://www.dot.state.mn.us/bridge/pdf/insp/USFS-TimberBridgeManual/em7700_8_chapter03.pdf
Answered by: Greg
Date published: 2018-04-28

Can you Use the wood to frame a ceiling

Asked by: Darnell
no that will not work, this wood is much to thin for that purpose.
Answered by: Greg
Date published: 2018-04-28

is this a true 2"x2"x 8' foot board

is this a true 2"x2"x 8' foot board
Asked by: ss
The real size is 1.375 in. x 1.37 in. x 96 in
Answered by: Greg
Date published: 2018-04-28

What is the type of wood? Pine?

Asked by: Jaguayo
this lumber is called "SPF" which stands for Spruce, Pine or Fir
Answered by: Greg
Date published: 2018-04-28
  • y_2018, m_6, d_19, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_, sid_202076422, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 21ms
  • QUESTIONS, PRODUCT

Customer Reviews

2 in. x 2 in. x 8 ft. Furring Strip Board is rated 2.6 out of 5 by 36.
Rated 1 out of 5 by from Lumber quality has gone way downhill I often buy furring strips for temporary projects... inexpensive low grade lumber with knots & occasional rough areas, but still adequate for quick projects and mock ups. My latest venture into HD for these 2x2 furring strips was very disappointing. Really rough areas running the entire length, to the point that many of the boards were triangular. Bad splits and cracks, knot holes so big the board breaks just by picking up at one end. Giving them the benefit of the doubt that I was just seeing the picked over pile, a new bundle of lumber was opened, and it was just as bad. I took a photo, I would share it if I could. The best job application for this stuff is firewood.
Date published: 2017-07-20
Rated 1 out of 5 by from These were pretty beat up. I ordered online and... These were pretty beat up. I ordered online and they were in the bundle of wood that I bought. Because some of them were intended for a hidden area on the chair I was building they worked, but I had to pick through them to get decent chair legs. Edges were missing and chewed up in some cases. I should've picked them out myself.
Date published: 2018-03-27
Rated 1 out of 5 by from Dang near impossible to get anything straight. Ended up buying some bundles, hoping that being st... Dang near impossible to get anything straight. Ended up buying some bundles, hoping that being strapped together would force them straight, but these came out almost fully twisted. Still managed to get the job done, just glad I bought 6 more than I needed.
Date published: 2018-05-09
Rated 1 out of 5 by from Every single piece of furring strip is bent, bowed, or splintered. To get 5 pieces of "decent" w... Every single piece of furring strip is bent, bowed, or splintered. To get 5 pieces of "decent" wood takes about 25 minutes to find. And I use the term "decent" very loosely. The employees are of no help either. When you ask them if they can help you make a selection they look at you and mouth breathe. When I asked what the difference is between the pressure treated furring strips and the non pressure treated strips, the guy looked at me and said "well one of them is pressure treated and the other isn't." Gee, thanks, Einstein.
Date published: 2018-04-25
Rated 2 out of 5 by from Of the eight pieces of these I bought for a project last month, two were relatively straight. The... Of the eight pieces of these I bought for a project last month, two were relatively straight. The rest would have made great hockey sticks. I get the whole bend-before-you-nail thing, so most of them worked fine in the end, but the last time I bought some of these, about 10 years ago, they were a) much better quality and b) cost less than they do now. Not sure if this is part of a business plan, which is probably working out well for someone. Just not for me.
Date published: 2018-04-25
Rated 1 out of 5 by from Quality has significantly eroded. There are far too many... Quality has significantly eroded. There are far too many rough, bark edged planks. When buying 9 piece bundles, you have to expect 30% plus in waste. Many pallets of merchandise come in wet and moldy. Not properly dried by mill. Warp quickly.
Date published: 2018-04-25
Rated 2 out of 5 by from The wood was very soft, some of the boards had... The wood was very soft, some of the boards had splits and broke just being moved from the car to the ground. At least haft the boards were bowed
Date published: 2018-04-25
Rated 1 out of 5 by from By far most of them are bent. Only buy the... By far most of them are bent. Only buy the 2x2 if you want to dig through a lot of bad ones.
Date published: 2018-04-17
  • y_2018, m_6, d_19, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.8
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_36
  • loc_, sid_202076422, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 91ms
  • REVIEWS, PRODUCT