My Account

Sign Out

Cart 0 items
All Departments

Internet #205202532

Model # PCTWH-6MM

2 in. x 96 in. x 1/4 in. Thermoclear Polycarbonate Multi-Wall H-Channel
Share
save to favorites Save to Favorites
print Print
0769125100094

2 in. x 96 in. x 1/4 in. Thermoclear Polycarbonate Multi-Wall H-Channel

$ 19 91

Overview

Join LEXAN Thermoclear multi-wall sheet using genuine LEXAN Thermoclear profiles. These profiles are designed to work with the LEXAN Thermoclear multi-wall branded sheets to create a complete and great looking finished glazing project. Exactly what you need for a professional looking project every time.
... See Full Description
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

+
+

Product Overview

Join LEXAN Thermoclear multi-wall sheet using genuine LEXAN Thermoclear profiles. These profiles are designed to work with the LEXAN Thermoclear multi-wall branded sheets to create a complete and great looking finished glazing project. Exactly what you need for a professional looking project every time.
  • Helps seal and join the ends of sheets to avoid excess moisture; dirt and other debris from entering the flutes
  • Clear finish can be used with all sheets of corresponding thickness
  • Easy to cut to customized lengths to fit project requirements
  • 8 ft. H-channel profile

Product Overview

Model #: PCTWH-6MM
Internet #: 205202532

Join LEXAN Thermoclear multi-wall sheet using genuine LEXAN Thermoclear profiles. These profiles are designed to work with the LEXAN Thermoclear multi-wall branded sheets to create a complete and great looking finished glazing project. Exactly what you need for a professional looking project every time.

  • Helps seal and join the ends of sheets to avoid excess moisture; dirt and other debris from entering the flutes
  • Clear finish can be used with all sheets of corresponding thickness
  • Easy to cut to customized lengths to fit project requirements
  • 8 ft. H-channel profile

Compare Similar

Compare Similar Products
Brand LEXAN Makrolon LEXAN
Name 12 in. x 24 in. x .093 in. Clear Polycarbonate Sheet 2 in. x 96 in. x 1/4 in. Thermoclear Polycarbonate Multi-Wall H-Channel 48 in. x 96 in. x 0.030 in. Polycarbonate Sheet 48 in. x 96 in. x 1/8 in. Clear Lexan UV Stable Polycarbonate Sheet
Price
$15.98
$19.91
$95.26
$186.00
Ratings (57) (15) (8) (20)
Product Weight (lb.) 1.16 5 15 23.7
Product Width (in.) 24 2 48 48
Surface Type Clear
Product Thickness (in.) 0.093 0.236 .030 0.118
Product Length (in.) 12 96 96 96
Sheet Features Clear,Shatter Resistant Clear,Shatter Resistant Clear,Shatter Resistant Clear,Shatter Resistant
View Product View Product View Product View Product

Specifications

Dimensions

Product Depth (in.)
96
Product Height (in.)
0.236
Product Length (in.)
96
Product Length (in.)
96
Product Thickness (in.)
0.236
Product Thickness (in.)
0.236
Product Width (in.)
2

Details

Bullet Proof
No
Mirrored
No
Non-Glare
No
Product Weight (lb.)
5lb
Returnable
90-Day
Shatter Resistant
No
Sheet Features
Clear,Shatter Resistant

Specifications

Dimensions

Product Depth (in.)
96
Product Height (in.)
0.236
Product Length (in.)
96
Product Length (in.)
96
Product Thickness (in.)
0.236
Product Thickness (in.)
0.236
Product Width (in.)
2

Details

Bullet Proof
No
Mirrored
No
Non-Glare
No
Product Weight (lb.)
5lb
Returnable
90-Day
Shatter Resistant
No
Sheet Features
Clear,Shatter Resistant

Questions & Answers

These sheets show 8 ft lengths. If a 10 foot length is needed can sheets be joined end to end us...

These sheets show 8 ft lengths. If a 10 foot length is needed can sheets be joined end to end using this same H channel. Example show side to side, but how about end to end?
Asked by: Woody
I used the h channel on the ends to make 12 foot lengths ..it a bit tricky to get in (we used a new putty knife to release any place it was binding) after we connected it to make it longer then we slide the 4 ft. (or 2 ft. in your case) sides up in between the two... they do not recommend this but i did it because i needed 12 ft. sections... and so far no problems. just need patience
Answered by: DJ
Date published: 2018-11-23

What is the exact thickness of the polycarbonate sheet? Thanks

What is the exact thickness of the polycarbonate sheet? Thanks
Asked by: Khyber
The thickness is .236" thank you.
Answered by: Your Polymershapes Expert
Date published: 2018-11-17

I need some clear polycarbonate sheets to make a patio cover to keep the rain out. Are these reco...

I need some clear polycarbonate sheets to make a patio cover to keep the rain out. Are these recommended or appropriate for my needs? Thank you.
Asked by: Singlemom
Hi, yes - the part # for the sheets you will want to purchase is PCTW4896-6MMCL which is the 48x96 sheets, the H channel is an accessory to join sheets together - thanks!
Answered by: Your Polymershapes Expert
Date published: 2019-05-26

OK I will show my ignorance, If using as a roof and the H channel is fit on top of a wood rafter ...

OK I will show my ignorance, If using as a roof and the H channel is fit on top of a wood rafter to hide the joint, how is the H channel connected to the beam? Is this one piece or does the top snap off to allow fastening the lower portion to the wood? If one piece does one drill through the whole thing? Same goes with the U channel is the channel ever connected to the top and bottom wood cross member? If so how?
Asked by: Woody
o The H-Channel is just one piece and does not necessarily need to be fastened down as the sheets themselves being fastened will hold the H-Channel in place. If you prefer to fasten the H though, you can fasten through the middle flute on every cross-member (horizontal support/purlin). Please be sure to pre-drill the holes at least 5/64” larger than the fastener to allow for expansion and contraction. o The U-Channel does not need to be fastened on to the ends as it fits snugly onto the sheet. If need be, you can use 100% silicone along the seam of the U-Channel or put tape on the ends before putting the U-Channel on to make it fit a little more snug. Thank you
Answered by: Your Polymershapes Expert
Date published: 2018-11-17
  • y_2019, m_7, d_15, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_, sid_205202532, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 3ms
  • QUESTIONS, PRODUCT

Customer Reviews

2 in. x 96 in. x 1/4 in. Thermoclear Polycarbonate Multi-Wall H-Channel is rated 4.8 out of 5 by 15.
Rated 3 out of 5 by from It's a bad design, could have been made a lot easier The uncut sheets will be easier to push into the H-channel because the ends are taper and a tad smaller, so it slides easily in and out. However, if you have to cut the sheet smaller, then you going have a heck of a time sliding it in. Now imagine doing this on top of the Pergola, it is an impossible task. I ended up assembling the entire roof on the ground and taping both ends of the joints with strong packing tape before holstering it to the pergola with 3 people. Some peopl used a metal flashing to hammer it in. You can try that. I used 4 pieces of 96x46; all cut smaller because I wanted the channel hidden by the beams. Use the circular saw with the plywood 140 teeth. I have seen H-Channel in two pieces, where you can place the first piece down, and then the top piece just clips in. That would have been a lot easier to use and install. Do yourself a favor and buy those instead. The u channel is also a pain to slide in, so I'll probably return those.
Date published: 2014-09-08
Rated 5 out of 5 by from It's a joiner for 1/4 in panels. Needs some glue... It's a joiner for 1/4 in panels. Needs some glue to hold panels together if you want them to be like one continuous panel.
Date published: 2019-06-22
Rated 5 out of 5 by from Fit as expected... Fit as expected
Date published: 2019-07-02
Rated 5 out of 5 by from It was just what I needed and ordered for my... It was just what I needed and ordered for my paneling. It was odd that it had to be shipped a few weeks after my other order arrived though.
Date published: 2019-02-05
Rated 5 out of 5 by from 5 Star Review Rating provided by a verified purchaser
Date published: 2019-03-06
Rated 4 out of 5 by from 4 Star Review Rating provided by a verified purchaser
Date published: 2019-02-07
Rated 5 out of 5 by from Excellent seal for the polycarbonated sheets. The only thing I wish you had are 90 and 45 degree... Excellent seal for the polycarbonated sheets. The only thing I wish you had are 90 and 45 degree options.
Date published: 2018-11-06
Rated 5 out of 5 by from Material and installation met my expectations ... Material and installation met my expectations
Date published: 2018-10-08
  • y_2019, m_7, d_15, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_15
  • loc_, sid_205202532, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 3ms
  • REVIEWS, PRODUCT