BrassCraft's Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS Excess Flow Valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS Excess Flow Valve (EFV) automatically resets once the gas line is properly repaired. BrassCraft's stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide the most complete corrosion resistance.
3/8 in. I.D. (1/2 in. O.D.) corrugated stainless steel
Safety+PLUS EFV helps protect against gas fires and explosions
Safety+PLUS EFV installs like a standard gas fitting; no special tools required
Use to install 4-burner gas ranges, cook-top, dryers and water heaters
ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
CSA certified to ANSI Z21.24/CSA 6.10 and ANSI Z21.75/CSA 6.27
Approved for indoor and outdoor use
1/2 in. MIP connection to gas supply or gas ball valve
Safety+PLUS EFV has no parts that can wear, break or misalign over time for 24/7 protection
Safety+PLUS EFV is omnidirectional and can be installed in any position - vertical or horizontal
Use with natural and LP (propane) gases
Safety+PLUS EFV is 100% factory performance tested
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
Inner diameter (in.)
Outer diameter (in.)
Product Depth (in.)
Product Height (in.)
Product Length (in.)
Product Width (in.)
MIP x MIP
Gas Vent Pipe and Fittings Accessory Type
Gas Appliance Connector
Maximum Pressure (psi)
Maximum Working Temperature (F)
Minimum working temperature (F)
Product Weight (lb.)
Warranty / Certifications
Certifications and Listings
Limited Manufacturer's Warranty
Questions & Answers
Typical questions asked about products:
Is the product durable?
Is the product easy to use?
What are the dimensions of the product?
out of 6 reviews
100%recommend this product
Showing 1-6 of 6 reviews
Feb 7, 2019
5 Star Review
Rating provided by a verified purchaser
Nov 7, 2018
Really good quality.....
Really good quality..
Jun 12, 2018
Had to have a new gas connector according to GE to install a new dryer and to comply for the warr...
Had to have a new gas connector according to GE to install a new dryer and to comply for the warranty.
This worked but cost more since it has an excess flow valve on it.
HD didn`t carry one that did not have the valve which would have saved me $10.00.
Easy to install and quality material.
May 29, 2018
Good solid construction, very flexible. Replaced my water heater so replaced the supply line due ...
Good solid construction, very flexible. Replaced my water heater so replaced the supply line due to corrosion around the fittings. Has fittings attached so connecting to the source valve and the water heater was a snap. Saved a lot of money by doing it myself.
Apr 26, 2018
Adds a high level of safety by restricting excess gas flow should there be a fault. Adds flexibi...
Adds a high level of safety by restricting excess gas flow should there be a fault. Adds flexibility to installation of gas fired equipment be it water heater or dryer; besides, clothes dryers may vibrate but the gas supply piping safety in inherent in the ability to flex. Installations that were challenging because of are much easier.
-Perhaps there could be some shorter lengths
-provide clear installation instructions, not to eliminate certain fittings from the installation such as the check valve
-provide clear installation instructions, that explains the check valve must be at the source end, though cannot be otherwise if installed as assembled ( perhaps someone might rearrange parts)
- might be able to discuss other possible improvements if I win!