#1 Home Improvement Retailer

Internet #206271963

Model #CSSD44R-60 X5

Safety+PLUS 1/2 in. MIP Excess Flow Valve x 1/2 in. MIP x 60 in. Stainless Steel Gas Connector 1/2 in. O.D. (53,200 BTU)

How to Get It

Product Overview

BrassCraft's Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS Excess Flow Valve (EFV) restricts gas flow at the appliance to a non-hazardous level. This immediate action helps avert the potential for a dangerous release of gas into the home. Gas is controlled only at the point where the problem exists; the rest of your system will continue to function. Safety+PLUS Excess Flow Valve (EFV) automatically resets once the gas line is properly repaired. BrassCraft's stainless steel gas connector also features a proprietary polymer coating designed to withstand prolonged exposure to harsh household cleaning, plumbing repair and masonry products as well as UV rays and salt. Unlike conventional dipped or sprayed coatings, the ProCoat coating is baked directly on the connector surface at high temperatures to provide a uniform coating over the entire length of the connector. The coating is applied only after the connector has been 100% leak tested to provide the most complete corrosion resistance.
  • 3/8 in. I.D. (1/2 in. O.D.) corrugated stainless steel
  • Safety+PLUS EFV helps protect against gas fires and explosions
  • Safety+PLUS EFV installs like a standard gas fitting; no special tools required
  • Use to install 4-burner gas ranges, cook-top, dryers and water heaters
  • ProCoat coating corrosion resistant to harsh chemicals as well as UV rays and salt
  • CSA certified to ANSI Z21.24/CSA 6.10 and ANSI Z21.75/CSA 6.27
  • Approved for indoor and outdoor use
  • 1/2 in. MIP connection to gas supply or gas ball valve
  • Safety+PLUS EFV has no parts that can wear, break or misalign over time for 24/7 protection
  • Safety+PLUS EFV is omnidirectional and can be installed in any position - vertical or horizontal
  • Use with natural and LP (propane) gases
  • Safety+PLUS EFV is 100% factory performance tested
  • Gas connector is 100% leak tested
  • Temperature rating: -20°F to 150°F
  • Pressure rating: 1/2 psi maximum
  • California residents

Additional Resources

From the Manufacturer

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Specifications

Dimensions

Inner diameter (in.)
0.375
Outer diameter (in.)
0.50
Product Depth (in.)
61.160 in
Product Height (in.)
1.250 in
Product Length (in.)
61.160 in
Product Width (in.)
1.250 in

Details

Connection type
MIP x MIP
Gas Vent Pipe and Fittings Accessory Type
Gas Appliance Connector
Inner material
Stainless steel
Maximum Pressure (psi)
0.50
Maximum Working Temperature (F)
150
Minimum working temperature (F)
-20
Outer Material
PVC
Product Weight (lb.)
1.0072 lb
Returnable
90-Day

Warranty / Certifications

Certifications and Listings
CSA Certified
Manufacturer Warranty
Limited Manufacturer's Warranty

Questions & Answers

Typical questions asked about products:

  • Is the product durable?
  • Is the product easy to use?
  • What are the dimensions of the product?

Customer Reviews

  • 4.2
    out of 7 reviews
  • 100%recommend this product
Filter by:
Showing 1-7 of 7 reviews
4 Star Review
Rating provided by a verified purchaser
by
  • Verified Purchase
Worked as it should. I bought this because it’s 12...
Worked as it should. I bought this because it’s 12 inches longer than the one that came with dryer.
by
  • Verified Purchase
I appreciated the addition of the "safety valve", but didn't...
I appreciated the addition of the "safety valve", but didn't really need 60". Also needed to adapt down to 3/8" NPT connection on the Dryer. I'm sure it will do the job for me.
by
  • Verified Purchase
worked great,was easy to connect...
worked great,was easy to connect
by
  • Verified Purchase
Its very flexible and very handy to work with it
Its very flexible and very handy to work with it
by
  • Verified Purchase
  • Recommended
This product, especially the 5ft length, worked perfectly for my gas dryer connection. It is dif...
This product, especially the 5ft length, worked perfectly for my gas dryer connection. It is difficult enough to get behind a dryer, in a tight space, to connect to the gas source. The flexibility and strength of the gas line made the job easier.
by
  • Verified Purchase
  • Recommended
This would not connect to the water heater I purchased...
This would not connect to the water heater I purchased and when I contacted a plumber they said that water heaters should be connected with hard pipe not flex line.
by
Response from BrassCraft MfgApr 28, 2018
Hello HomeDepotCustomer -
Thank you for taking the time to tell us about your recent experience with our gas connector. This product is for use on 4-burner gas ranges, cook-top, dryers and water heaters with connection size 3/8 in. I.D. (1/2 in. O.D.) corrugated stainless steel. It is through your feedback that we are able to improve upon our products. We will be sure to share your experience with our quality department. If you have any questions or have any other feedback, please contact our Customer Support Team at 877-272-7755.
  • Verified Purchase
Showing 1-7 of 7 reviews