2709 5/16 in. x 5-13/16 in. x 8 ft. PVC Composite White Flat Utility Trim Moulding

Works Perfect As We wanted.

Dear Valued Home Depot Customer, We have reached out to the manufacturer and their reply is, "The flat utility should be attached with trim screws."

This is also available in 12 ft. x 4 in. x 1 in. and 1 in. x 6 in. x 8 ft.

Not sure of your question as this is pvc material (plastic) and does not absorb water. You only need to paint it for a color change. It will not absorb water and is great for any location that is in contact with concrete, such as garage door trim. However no PVC trim is appropriate for structure, it will not support any weight and should be considered an "applique" over structural wood. Apply with construction adhesive and nails. For an almost invisible joint, mitre at 45 degrees. Ends joints can be glued using pvc plumbing. Easy to caulk as well. glue

Yes, it is very flexible it will bend very easily but you will not be able to make sharp 90 degrees bends, only semicircular bends.

I would assume so. It was glued down on too of the trim around my the windows and looks fabulous.

Flat Utility Trim may be too thin for this purpose. We recommend using a 3/4" PVC trimplank to assure performance in this wide a board cladding.

Not stainable, but can be painted with 100% acrylic latex paint. Thank you

No. One side is a faux wood-grain pattern; the other side has three shallow grooves (~1/32" deep) equally spaced along the length.

Buy a board stretcher. It only works above 90 degrees though