Internet #206971071

Model # 106128

Store SKU #1001754130

0090489440299

3/4 in. x 4 ft. x 8 ft. Ground Contact Pressure Treated Pine Performance Rated Sheathing

  • 2X the protection compared to Above Ground treatment
  • Treated for protection against fungal decay, rot and termites
  • Ideal for decks, walkways, landscaping and other outdoor projects
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

+

Product Overview

  • 2X the protection compared to Above Ground treatment
  • Treated for protection against fungal decay, rot and termites
  • Ideal for decks, walkways, landscaping and other outdoor projects
Pressure-Treated Southern Yellow Pine meets the highest grading standards for strength and appearance. Treated for protection against fungal decay, rot and termites, it is ideal for ground contact and a variety of general uses including exposed structures, sill plates, decks, docks, ramps and other outdoor applications. Responsibly manufactured from renewable southern yellow pine, this plywood is both safe and environmentally friendly when used as directed in appropriate applications.
  • Made of southern yellow pine
  • Pressure-treated for ground contact and exterior general use
  • Backed by a lifetime limited warranty against termite infestation and rot
  • 3/4 in. x 4 ft. x 8 ft.
  • Uniform thickness, density and appearance for stable and long lasting performance
  • Note: product may vary by store






  • California residents see Prop 65 WARNINGS

Product Overview

  • 2X the protection compared to Above Ground treatment
  • Treated for protection against fungal decay, rot and termites
  • Ideal for decks, walkways, landscaping and other outdoor projects
Model #: 106128
Sku #: 1001754130
Internet #: 206971071

Pressure-Treated Southern Yellow Pine meets the highest grading standards for strength and appearance. Treated for protection against fungal decay, rot and termites, it is ideal for ground contact and a variety of general uses including exposed structures, sill plates, decks, docks, ramps and other outdoor applications. Responsibly manufactured from renewable southern yellow pine, this plywood is both safe and environmentally friendly when used as directed in appropriate applications.

  • Made of southern yellow pine
  • Pressure-treated for ground contact and exterior general use
  • Backed by a lifetime limited warranty against termite infestation and rot
  • 3/4 in. x 4 ft. x 8 ft.
  • Uniform thickness, density and appearance for stable and long lasting performance
  • Note: product may vary by store






  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand Dimensions Tri-PLY Dimensions
Name Oriented Strand Board (Common: 7/16 in. x 2 ft. x 4 ft.; Actual: 0.435 in. x 23.75 in. x 47.75 in.) Underlayment (Common: 5.0 mm x 4 ft. x 4 ft.; Actual: 0.196 in. x 47.75 in. x 48 in.) Pine Soffit Plywood Panel (Common: 11/32 in. x 2 ft. x 4 ft.; Actual: 0.322 in. x 23.75 in. x 47.75 in.)
Price
$4.29
$12.36
$14.21
Ratings (59) (171) (60)
Nominal Product Length (ft.) 4 4 4
Nominal Product Thickness (in.) 7/16 3/16 11/32
Nominal Product Width (ft.) 2 4 2
View Product View Product View Product

Specifications

Dimensions

Actual Product Length (in.)
96.00
Actual Product Thickness (in.)
.71875
Actual Product Width (in.)
48.0
Nominal Product Length (ft.)
8
Nominal Product Thickness (in.)
3/4
Nominal Product Width (ft.)
4

Details

Engineered Wood Type
Plywood Sheathing
Plywood Features
Pressure Treated
Span Rating
48/24
Weather Exposure
Exterior

Warranty / Certifications

Manufacturer Warranty
See store for details

Specifications

Dimensions

Actual Product Length (in.)
96.00
Actual Product Thickness (in.)
.71875
Actual Product Width (in.)
48.0
Nominal Product Length (ft.)
8
Nominal Product Thickness (in.)
3/4
Nominal Product Width (ft.)
4

Details

Engineered Wood Type
Plywood Sheathing
Plywood Features
Pressure Treated
Span Rating
48/24
Weather Exposure
Exterior

Warranty / Certifications

Manufacturer Warranty
See store for details

Questions & Answers

Can this be cut into two 3' x 4' pieces?

Can this be cut into two 3' x 4' pieces?
Asked by: Scott
NO
Answered by: DAVE
Date published: 2019-01-15

I need to have three sheets of 3/4 x 4 x 8 cut into four sections of 2 x 4 for shelves. Can this ...

I need to have three sheets of 3/4 x 4 x 8 cut into four sections of 2 x 4 for shelves. Can this be cut.
Asked by: Darryll
This product can be cut. Please contact your local lumber associate to discuss special order options.
Answered by: UFPI Representative
Date published: 2018-08-14

what is the weight of each sheet

what is the weight of each sheet
Asked by: William
One sheet weighs about 89 lbs.
Answered by: UFPI Representative
Date published: 2019-04-23

How much does one sheet weigh ??

How much does one sheet weigh ??
Asked by: PAULD
I'd say closer to the 90 pounds said above. I had to move this around myself for a DIY project at the house and it was very difficult. Between the weight and the size it's difficult and awkward to move around.
Answered by: Bob
Date published: 2019-02-14
  • y_2019, m_7, d_18, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_70
  • loc_, sid_206971071, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 6ms
  • QUESTIONS, PRODUCT

Customer Reviews

3/4 in. x 4 ft. x 8 ft. Ground Contact Pressure Treated Pine Performance Rated Sheathing is rated 3.8 out of 5 by 362.
Rated 1 out of 5 by from Not true pressure treated and had to pick through pile because the sheets were 5/8" - 1" thickness Not true pressure treated and had to pick through pile because the sheets were 5/8" - 1" thickness
Date published: 2019-05-22
Rated 2 out of 5 by from The pressure treated pine was not even dry. I... The pressure treated pine was not even dry. I transported it home in my van and removed it a couple of days later. The pine was heavy and the van's floor was wet when I removed the pine. We'll have to wait and see how it stands up to the outdoor weather as I used half of it as a cover for my fire pit.
Date published: 2019-06-18
Rated 3 out of 5 by from I had to pick thru 8 sheets til we found some without 21 knots in 2' x4' area got it home let it... I had to pick thru 8 sheets til we found some without 21 knots in 2' x4' area got it home let it sit for 2 weeks before using it and had to return two pieces because it was extremely warped .not usable.
Date published: 2019-06-25
Rated 2 out of 5 by from Poor lamination and warping. 5 sheets into the bundle and was the best of the worst with a 3/4 le... Poor lamination and warping. 5 sheets into the bundle and was the best of the worst with a 3/4 length of seperated surface layering 6" x 5'. Needed this for project bu will not buy this item again.
Date published: 2019-05-07
Rated 1 out of 5 by from The glue is not good wood pulling apart, they have... The glue is not good wood pulling apart, they have to many knots I even had to bring some back they!
Date published: 2019-05-24
Rated 1 out of 5 by from There was delamination on one corner about 1’ x 3’.... There was delamination on one corner about 1’ x 3’. I had to glue it in order to finish the job.
Date published: 2019-05-22
Rated 1 out of 5 by from Warped wood is very difficult to work with. Looked fine... Warped wood is very difficult to work with. Looked fine until I separated the from the stack.
Date published: 2019-06-26
Rated 1 out of 5 by from Plywood was coming a part on the corners, and I... Plywood was coming a part on the corners, and I thought I had the best sheet out of the pile
Date published: 2019-05-07
  • y_2019, m_7, d_18, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_362
  • loc_, sid_206971071, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 10ms
  • REVIEWS, PRODUCT