- Lightweight-easy to install and assemble
- Lifetime limited residential warranty
- Perfect use for deck balusters and other outdoor projects
- See More Details
Product Overview
Give your deck a finished, stylish, distinctive touch with these attractive wooden balusters. High-grade and long-lasting, these balusters come with a lifetime limited warranty against rot and termites. Just like our other wood decking products, our balusters can be cut to size for special projects. They're also compatible with aluminum, offering you the widest range of design options. Choose your own unique combination of decking components to create a deck that's truly your own.
- 100% Solid wood made from southern yellow pine and pressure treated with MCA (micronized copper azole) for long life lasting performance
- Suitable for use on exterior deck railings and stairs in commercial or residential applications
- Natural wood finish may be stained or painted for a customized finish
- Dimensions: 2 in. x 2 in. x 36 in.
- Easy installation
- Note: product may vary by store
- Actual product dimensions: 1.375 in. x 1.375 in. x 36 in.
- California residents
Specifications
Dimensions
Product Depth (in.)
2
Product Height (in.)
36
Product Width (in.)
2
Details
Chemical retention (lb./cu. ft. )
2.3
Color Family
Wood
Color/Finish
Tan
Core Type
Solid Core
Fastener recommendation
Screws
Features
Paintable,Pressure Treated,Stainable
Interior/Exterior
Exterior
Material
Wood
Number of balusters included
1
Pressure treatment chemical
MCA - Micronized Copper Azole
Product Weight (lb.)
2.0
Stair Part Type
Baluster
Warranty / Certifications
Manufacturer Warranty
Limited lifetime
Questions & Answers
16Questions57Answers
Where can you buy these?
Asked by RB July 22, 20203
AnswersYes these are 2x2 nominal, a little less than 1.5x1.5 actual
Is it .87 for each baluster or .87 per ft.
Asked by peter May 8, 20205
Answers87 cents ea
Are these made with treated Southern yellow Pine?
Asked by Toddster April 28, 20203
Answersyes
how many wood balusters are in a bundle
Asked by JT April 25, 20203
AnswersSixteen (16) per bundle.
what size of screws to use with these?
Asked by AM April 22, 20202
AnswersIn my application I was attaching in the back side of the railing (from the deck) going through 3/4” stock so I used 1 5/8” stainless steel screws and it worked very well.
Are these angled on one end. my current decking spindles are angled and i want it to match as close as pos sible
Asked by Notapro April 10, 20195
AnswersNo, they were not angled only because I was not looking for angled balusters; however, there were plenty of angled ones.
Can they be used on an Indoor staircase railing
Asked by SMD April 25, 201810
AnswersTechnically yes but I would not use pressure treated wood inside where people are touching it
how many come in a bundel?
Asked by Francisco November 26, 20178
Answers#16 Baluster's in a Bundel
Can these be cut by you to 27”, if so how much would it cost?
Asked by Tim October 20, 20178
Answersno
Two answers say they are 1.25" square and one answer says they measure 2" x 2". That is a big dif...
Asked by RonW September 12, 201710
Answersthe 2 x 2 inch measurement is the nominal measurement, while the 1.25" is the actual measurement
Customer Reviews
Aug 19, 2019
I purchased 4 bundles of 16 to do the handrail on my deck.. I knew I would have a few extra in ca...
I purchased 4 bundles of 16 to do the handrail on my deck.. I knew I would have a few extra in case I had any bad ones.. I did have 2 that I could not use, but you always find a couple.. Most were fairly straight and and even the ones with a small bow you could still use.. I always run my spindles close together, it gives the appearance of quality. The wider you go the cheaper and more unprofessional your project will look.
by Mike
Jul 17, 2018
I used these to build a "picket fence" around my deck. So much easier to handle and less waste t...
I used these to build a "picket fence" around my deck. So much easier to handle and less waste than cutting up 8' sticks. Bundled with straps so they were all flat & very little to no bow in the 96 pieces I needed. Perfect for my job!
by Fred
Aug 6, 2017
This a hard wood and can split, crack or break if you do not pre-drill holes. It can hold a lot ...
This a hard wood and can split, crack or break if you do not pre-drill holes.
It can hold a lot of weight.
I have used this for a shelf / cabinet that had 2 x 260 pound turtle tanks on the top.
The screws I used went from the top down to hold them in place and on the side to hold a basking platform in place and hold walls in place.
by JurassicParkStaff
Related Products
Explore More on homedepot.com
Outdoor Living
- Exaco Raised Garden Beds
- Newhouse Lighting Plant Grow Lights
- 64 oz.(4 lb.) Diatomaceous Earth Food Grade 100% with Powder Duster Applicator
- 22 in. Performer Deluxe Charcoal Grill in Copper with Built-In Thermometer and Digital Timer
- Plastic Outdoor Decor
- Shop Sandstone Stepping Stones
- Steel Dump Carts
- SimPoolTec Pool Cover Supplies
- Shop Assorted Colors Landscape Rocks
- Silver Creek Stoneworks Hardscapes
- Steel Irrigation Tools
- Lawnmaster Electric String Trimmers
Plumbing Parts
Doors and Windows
Storage and Cleaning Supplies
HVAC and Electrical
