Model # 163171

Internet #203982351

Store SKU #1000006310

0090489258450

4 in. x 6 in. x 10 ft. #2 4B Ground Contact Cedar-Tone Pressure-Treated Timber

  • 2X the protection compared to Above Ground treatment
  • Treated for protection against fungal decay, rot and termites
  • Ideal for decks, landscaping and other outdoor projects
store icon Loading Buying Options...
package icon Loading Buying Options...
Sorry, but we ran into issues loading these options. Please try refreshing.

Frequently Bought Together

Frequently Bought Together

+
+

Product Overview

Pressure treated deck at sunset to show stairs and an outdoor living space.


Add Value To Your Property

Studies show that adding a deck is one of the best ways you can increase your home's value.

Overhead looking view of a cedar-tone pressure treated deck to feature a chevron deck board print and complimenting bench, stairs, and railings.


Building Code Approved

Pressure-treated decking is building code approved for use in decking in above-ground or ground contact applications.

Close up of the deck boards showing how to properly clean your deck


Extend The Life Of Your Deck

Your maintenance efforts will give you a pressure-treated project that looks bright and fresh for years to come!

A sunny day of a man using a powerwasher to clean his deck boards


Preventative Maintenance Plan

1. Depending on the location of your outdoor project with regard to direct sun exposure, foliage coverage, etc., it may be sufficient to clean/brighten and recoat every two years. 2. If you decide to wait two or more years to perform your next cleaning/brightening, you may want to use a power washer. Be sure that the cleaner/brightener you use contains a mildewcide.

Close up of the a generic paint can on deck boards


Choosing The Right Stain Or Paint

When determining the right stain and paint for your deck, consider what color will best enhance the wood's finish.

A close up of water beaded up on a deck board


Paint or Stain Tips

If you desire to paint or stain the treated wood project, it is important that the wood be dry enough to accept a coating. The best way to determine if the wood is sufficiently dry to paint or stain is to sprinkle droplets of water onto the wood. If the water droplets are absorbed, the wood is ready to be painted or stained. If the water droplets bead on the surface of the wood, it is too wet. You should wait a few days before attempting to paint and stain the wood.

Close up of a non color additive pressure treated deck board


No Color Additive

Weathershield Pressure-Treated Lumber

Close up of a cedar-tone pressure treated deck board


Cedar-Tone

Weathershield Pressure-Treated Cedar Tone Lumber

Close up of a redwood-tone pressure treated deck board


Redwood-Tone

Weathershield Pressure-Treated Redwood Tone Lumber

Close up of a pressure-treated post with Deckorail solar and ball top post caps


Post Caps

Post caps add the finishing touch to your deck, porch, or fence project. What's more, they protect your post from nature's elements.

Close up of a pressure-treated double v and square edge posts


Deck Posts

Deck posts add a classic, decorative charm to your outdoor living space all while adding support to your deck, fence or porch.

Close up of a pressure-treated B2E baluster and square edge spindle


Balusters & Spindles

Treated balusters are used not only for safety and strength, but they also aid in creating a custom look to your railing project.

  • 2X the protection compared to Above Ground treatment
  • Treated for protection against fungal decay, rot and termites
  • Ideal for decks, landscaping and other outdoor projects
4 x 6 x 10 #2 Pressure-Treated Southern Yellow Pine 4B Cedar-Tone Timber meets the highest grading standards for strength and appearance. This lumber is pressure treated in order to protect it from termites and rot. Ideal for a variety of applications, including decks, docks, ramps, and other outdoor projects where lumber is exposed to the elements. This lumber is color infused with lasting cedar-tone colorant. When used properly, it is both safe and environmentally friendly.Treated wood is typically still wet when it’s delivered to The Home Depot or job site. As it dries, you should expect slight changes in width and length. As lumber dries, it may split, cup and warp. This is more likely to occur to occur in lower-grade boards, where knots and uneven grains are already present. Each piece of lumber is unique and carries physical characteristics that may include the following: knots, warping, shrinkage, swelling and/or splitting.
  • Manufactured from southern yellow pine, a renewable resource, for an environmentally friendly choice
  • Pressure treated for ground contact, heavy duty
  • Uniform thickness, density and appearance with a smooth surface
  • 4 in. x 6 in. x 10 ft.
  • Lifetime limited residential warranty and two year color limited warranty
  • No two pieces of lumber are the same.
  • Color, grain pattern and texture will vary as well.
  • Use #2 grade lumber when both appearance is not the most important to you project.
  • May have wane (bark edge) on corners
  • Use #2 grade lumber when strength is the main feature you are looking for on your project.



  • California residents see Prop 65 WARNINGS

Product Overview

  • 2X the protection compared to Above Ground treatment
  • Treated for protection against fungal decay, rot and termites
  • Ideal for decks, landscaping and other outdoor projects
Model #: 163171
Sku #: 1000006310
Internet #: 203982351

4 x 6 x 10 #2 Pressure-Treated Southern Yellow Pine 4B Cedar-Tone Timber meets the highest grading standards for strength and appearance. This lumber is pressure treated in order to protect it from termites and rot. Ideal for a variety of applications, including decks, docks, ramps, and other outdoor projects where lumber is exposed to the elements. This lumber is color infused with lasting cedar-tone colorant. When used properly, it is both safe and environmentally friendly.Treated wood is typically still wet when it’s delivered to The Home Depot or job site. As it dries, you should expect slight changes in width and length. As lumber dries, it may split, cup and warp. This is more likely to occur to occur in lower-grade boards, where knots and uneven grains are already present. Each piece of lumber is unique and carries physical characteristics that may include the following: knots, warping, shrinkage, swelling and/or splitting.

  • Manufactured from southern yellow pine, a renewable resource, for an environmentally friendly choice
  • Pressure treated for ground contact, heavy duty
  • Uniform thickness, density and appearance with a smooth surface
  • 4 in. x 6 in. x 10 ft.
  • Lifetime limited residential warranty and two year color limited warranty
  • No two pieces of lumber are the same.
  • Color, grain pattern and texture will vary as well.
  • Use #2 grade lumber when both appearance is not the most important to you project.
  • May have wane (bark edge) on corners
  • Use #2 grade lumber when strength is the main feature you are looking for on your project.



  • California residents see Prop 65 WARNINGS

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.

Compare Similar

Compare Similar Products
Brand
Name 4 in. x 4 in. x 8 ft. #2 Ground Contact Pressure-Treated Southern Yellow Pine Timber 8 ft. Landscape Timber
Price
$9.17
Was $4.47
$2.47
Save $2.00 (45%)
Ratings (1105) (685)
Nominal Product Length (ft.) 8 8
View Product View Product

Specifications

Dimensions

Actual Product Length (ft.)
10
Actual Product Thickness (in.)
3.5
Actual Product Width (in.)
5.5
Nominal Product Length (ft.)
10
Nominal Product Thickness (in.)
4
Nominal Product Width (in.)
6
Product Length (in.)
120

Details

Chemical retention (lb./cu. ft. )
0.23
Fastener recommendation
N/A
Features
Paintable,Stainable
Lumber Grade
No. 2
Lumber quality
No-prior
Material
Wood
Moisture content
Green
Pressure treatment chemical
MCA - Micronized Copper Azole
Texture
Smooth

Warranty / Certifications

Manufacturer Warranty
Lifetime limited residential warranty & Two-Year color limited warranty

Specifications

Dimensions

Actual Product Length (ft.)
10
Actual Product Thickness (in.)
3.5
Actual Product Width (in.)
5.5
Nominal Product Length (ft.)
10
Nominal Product Thickness (in.)
4
Nominal Product Width (in.)
6
Product Length (in.)
120

Details

Chemical retention (lb./cu. ft. )
0.23
Fastener recommendation
N/A
Features
Paintable,Stainable
Lumber Grade
No. 2
Lumber quality
No-prior
Material
Wood
Moisture content
Green
Pressure treatment chemical
MCA - Micronized Copper Azole
Texture
Smooth

Warranty / Certifications

Manufacturer Warranty
Lifetime limited residential warranty & Two-Year color limited warranty

Questions & Answers

Is this wood KDAT? Kiln Dried After Treatment

Is this wood KDAT? Kiln Dried After Treatment
Asked by: Carl
Carl, This is not kiln dried.
Answered by: UFPI Representative
Date published: 2018-08-22
  • y_2019, m_5, d_21, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.12
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_, sid_203982351, prod, sort_[SortEntry(order=NUM_ANSWERS, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING), SortEntry(order=BEST_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=POSITIVE_ANSWER_FEEDBACK_COUNT, direction=DESCENDING), SortEntry(order=NUM_ANSWERS, direction=DESCENDING)]
  • clientName_homedepot
  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 37ms
  • QUESTIONS, PRODUCT

Customer Reviews

  • bvseo_sdk, java_sdk, bvseo-3.1.1
  • CLOUD, getContent, 56ms
  • REVIEWS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;