- Pre-finished in white and can be painted for a custom look
- Allows you to finish FRP tile installations easily
- Simply snap into place and glue
- See More Details
Frequently Bought Together
Product Overview
- FRP polymer extrusion is durable, low maintenance and easy to install
- Pre-finished in white and can be painted or stained
- Resists moisture, rot and termites
- Snaps into place on tile board and finishes corners where tiles meet
- Satisfaction Guaranteed
- Note: Product may vary by store
Info & Guides
Compare Similar Corner Moulding
|  |  |  | |
| Brand | Royal Mouldings | Royal Mouldings | Royal Mouldings | |
| Name | 854- 1/2 in. x 7/8 in. x 8 ft. PVC FRP Inside Corner Moulding White | 5093 - 3/4 in. x 3/4 in. x 96 in. PVC Composite Inside Corner Molding | 6577 11/16 in. x 11/16in. x 8 ft. PVC Composite White Outside Corner Molding | 5205 1-1/8 in. x 1-1/8 in. x 8 ft. PVC Composite White Outside Corner Molding |
| Price | ||||
| Ratings | (23) | (96) | (43) | (180) |
| Moulding Type | Inside Corner | Inside Corner | Outside Corner | Outside Corner |
| Material | Composite | Composite | Composite | Composite |
| Product Length (in.) | 96 in | 96 in | 96 in | 96 in |
| Finish Type | Finished | Finished | Finished | Finished |
| Moulding Features | Moisture Resistant,Rot Resistant,Termite Resistant | Moisture Resistant,Rot Resistant,Termite Resistant | Moisture Resistant,Rot Resistant,Termite Resistant | Moisture Resistant,Rot Resistant,Termite Resistant |
| View Product | View Product | View Product | View Product |
Compare Similar Corner Moulding
| | | | |
| Brand | Royal Mouldings | Royal Mouldings | Royal Mouldings | |
| Name | 854- 1/2 in. x 7/8 in. x 8 ft. PVC FRP Inside Corner Moulding White | 5093 - 3/4 in. x 3/4 in. x 96 in. PVC Composite Inside Corner Molding | 6577 11/16 in. x 11/16in. x 8 ft. PVC Composite White Outside Corner Molding | 5205 1-1/8 in. x 1-1/8 in. x 8 ft. PVC Composite White Outside Corner Molding |
| Price | ||||
| Ratings | (23) | (96) | (43) | (180) |
| Moulding Type | ||||
| Material | ||||
| Product Length (in.) | ||||
| Finish Type | ||||
| Moulding Features | ||||
| View Product | View Product | View Product | View Product |
Specifications
Dimensions
Details
Warranty / Certifications
Questions & Answers
Not sure I understand...I only see ONE "slot" on ONE side that a panel would slide into, based on...
Asked by JessiMac1530 November 9, 2020You install a panel against one wall all the way to the corner (allowing for expansion) Now, either 1) Put the next panel into the slot and push it up against the corner to hold the previous panel in place. (probably the easiest) Or 2) Put a small bead of caulk or panel glue in the corner, then put it in the corner with the slot towards the next wall. Take the next panel and fit it into the slot. EITHER WAY, You probably want to slide both panels into place first WITHOUT any glue to make sure that the corner is straight (Ha!) and see where you may need to shave a little drywall, etc. so they butt up against each other in a straight line.
Can I use this product to re-frame a square 23"X 19" white laminated wood. The frame was damag...
Asked by Rhodesia September 1, 2020No. This is more like window or patio door trim. I was very disappointed.
Is this product flexible/bendable? Can it be installed at a curved wall?
Asked by Jen August 1, 2020Hi Jen, no it is not. We appreciate your business and look forward to serving you in the future. Thank you for shopping Home Depot!
can someone share the width of the "C" thats at the 45deg angle? I have an alt application and I ...
Asked by sagrr May 5, 2020The C is 0.090” wide. It is a lot smaller the width you need.
How are these trim products attached to the walls? With the panel adhesive, screwed, other?
Asked by Eric January 30, 2020They slide onto the panel, and then the panel is glued. No need to use any type of adhesive on the corners themselves.
Can I get this in 10' sections?
Asked by Bill October 15, 2019This item only comes in 8' Thank you
How are the Inside Corner and Cap Mouldings installed?
Asked by Mike March 4, 2019No.
I need to install this to join inside corners of FRP sheets where vertical walls meet a sloped ce...
Asked by BK November 19, 2018I think you might be able to but gentle use of a heat gun would probably make the install look professional if perfect angles and lay flat surfaces are your goal. Good luck.
How can I remove the moulding to replace it? I have attempted dislodge with multiple tools and I ...
Asked by Laura October 9, 2017In order to be able to remove and replace this molding you'll have to completely remove one of the wall panels. Your panels interlock into this style molding.
can i get this in another color than white? need black or brown.
Asked by jb June 21, 2017Go on the internet. It comes in 6 colors but the shipping charges will get you. A different lumberyard says they can order it in all the colors but you must do it on line.
Customer Reviews
Related Products
Explore More on homedepot.com
Storage and Cleaning Supplies
Outdoor Living
Top Brands
Lighting and Fixtures
HVAC and Electrical
Home Decoration
Furniture
Lumber, Building Materials and Safety Equipt
Plumbing Parts
Flooring Options
Automotive Supplies and Tools
Home and Kitchen Appliances