Durovent 23-1/2 in. x 46 in. Rafter Vent with Built-In Baffle 10/Ctn
$25.18
Pay $0.18 after $25 OFF your total qualifying purchase upon opening a new card. 
Apply for a Home Depot Consumer Card- Aids attic ventilation
- Lightweight and moisture resistant
- One step installation
- View More Details
Free & Easy Returns In Store or Online
Return this item within 90 days of purchase. Read Return Policy
Product Details
Each carton contains 10 Vents. The ADO Products Durovent 23-1/2 in. x 46 in. Rafter Vent with Built-In Baffle helps keep air moving in your attic. The ventilation system features polystyrene construction, which is lightweight and moisture resistant and the integrated baffle means that you need no blocking material between the vent and the top plate.
- Install between rafters to provide an unobstructed air channel through insulation to help keep air flowing freely from soffits to ridge vents
- Ideal for high-volume new construction or inexpensive re-insulation
- Designed to friction-fit between the rafters or trusses with the vent's cones pushed up against the roof deck
- Secure the vent in place by stapling the wide nailing flanges to the truss and top plate by using a horizontal stroke with your hammer tacker (hammer tacker not included)
- Polystyrene material provides a lightweight air channel
- Water resistant and durable, blocking out moisture and wind from penetrating the attic, to satisfy most building-code requirements
- Economical way to meet energy code requirements for air flow
- Integrated baffle eliminates the need for blocking material such as batt insulation between the vent and the wall top plate, as is commonly the practice for installation of rafter vents without an integral baffle
- How much do you need? Let our calculator help:
- Return Policy
Specifications
Dimensions: H 2 in, W 23.5 in, D 46 in
Questions & Answers
31Questions
Q:Did this product change from a styrene vacu-formed plastic to a foam egg shell material? I want the plastic version pictured!
by|Nov 15, 2023
1 Answer
Q:Can these be installed from the outside? I'm pulling out a dozen fire blocks to install vents as a retrofit and would like to staple from the eave.
by|Oct 10, 2023
1 Answer
Q:I put one of these at each side of the roof to block insulation from going into the overhang. Are these meant to be added on to and continue all the way to the roof pitch? Meaning I would prob need about 3 straight baffles each side to hit the pitch.
by|Nov 20, 2022
1 Answer
Q:How do they get installed?
by|Oct 30, 2022
3 Answers
Showing 1-4 of 31
5
71
4
38
3
15
2
6
1
19
Nov 15, 2014
Best product on the market for maintaining attic ventilarion
The Durovent with Baffle Attic Vent Channel was lightweight, made of long lasting polystyrene, moisture resistant, easy to install, with a stapler. The Durovent had a top plate block attached to prevent insulation from entering the soffet area. The baffling assures sufficient path for air movement for proper attic ventilation, especially for blown in insulation. This product is a much better product than the old card board top plate block and is a primary step for proper attic insulation, decreasing energy cost in my home. My cost for Durovent baffles was $125 for my entire home, including the garage. You can guess what it would the bill could be without proper attic ventilation.
by
Dec 8, 2023
The product is as described. It works well between my 24" OC. rafters. It is flimsy and using a stick to set it in place (existing attic) was very helpful.
by
Dec 7, 2023
by
Dec 6, 2023
Product is thin as paper, for the price they could have made it more durable.
by
Nov 29, 2023
Lite weight and easy enough to work with
by
Nov 16, 2023
What a money maker for the CEO of this compony. This baffle material is POOR. WAY TO THIN. Staples go right thru the thin polystyrene and it cracks and tears easily. For the price you would think the product would be better. Another Greedy Compony
by
Response from ADO Product ExpertNov 17, 2023
I am truly sorry you feel that way. The Durovent has been made like this for the last 36 years. It is used by countless insulation contractors around the country. We do have another product that is tough enough to be handled more roughly and is definitely better for retrofit jobs. That would be our Pro Vent product that you can also buy through big box stores as well. I wish you the best of luck with your project.
Nov 15, 2023
I used them in an existing attic. Not an ideal installation as it was also a low pitch hip roof. Panels are thin which increased my challenge. Probably best used in new construction when there is adequate access for installation.
by
Oct 11, 2023
by
Sep 6, 2023
Perfect for what I needed
by
Sep 4, 2023
works well, easy to install.
by
0/0
Compare Similar Items
Insulation Accessory Type | |||
|---|---|---|---|
Rafter Vent | Rafter Vent | Foam Dispensing Gun | Foam Dispensing Gun |
Insulation Features | |||
Water Resistant | Water Resistant | Fire Block Rated | Fire Block Rated |
Related Searches
Related Products
For improved air circulation in the attic, install the Durovent 22 in. x 48 in. Rafter Vent (10-Pack). It can be cut to fit most joist spaces and is an affordable way to meet energy-code requirements for air flow. Use it between rafters to create an air channel through insulation to help keep air flowing freely in your attic.
Pins and Caps, Single Garage Door Insulation Kit with Instructions (8 panel) by ADO Products model GDIKS. If you want to add more pins and caps to your garage door kit, this package includes 17 pins with adhesive tape and 17 caps. Tape applies best in moderate temperatures. Clean garage door thoroughly and allow to dry before applying adhesive backed pins.
