Vines 32 in. x 4 ft. Black Vinyl Decorative Screen Panel

Acurio Lattice panels can be suspended using chain or rope. Holes may be drilled through the border and reinforced with metal grommets to run a chain/rope through for suspension.

Our panels should not be installed flat or expected to hold any weight. These panels are for decorative use only. To be safe it is recommended to be installed in more traditional vertical applications.

Our panels can potentially be used to disguise an A/C unit. There would need to be some sort of framing created for our panels to insert into and be fastened to. This can give a unique flair to an otherwise unsightly appliance.

Our panels can be used to hide unsightly appliances, trashcans, etc. There will need to be some sort of framing or fencing to insert our panels into. This is a great option for your application.

Yes, the following is some paint information. PVC is an inert, static material with minimal response to environmental conditions (water, sun, etc.) which makes it an excellent material for paint. The material has a matte finish which aids in paint adhesion. Though no surface preparation is absolutely necessary, it is recommended that the surface be cleaned with isopropyl alcohol or acetone just in case dirt or unseen oil is present. Wipe with a soaked cloth and quickly wipe away any excess cleaning solution. Lightly sanding the surface may be beneficial though this may leave unsightly sanding scratches that can be seen if applying light coats of spray paint (not so much if using a brush). Buffing with an orbit buffer is an option. Use micro poly-fiber pads. Paint: Use a quality interior or exterior vinyl or acrylic lacquer paint (do not use oil based paints). Priming prior to painting is only necessary if required by the paint manufacture.

If you click the following link, it will take you to a technical drawing of the Vines design. The element itself is around 3" x 3". https://www.acuriolattice.com/Vines/

All of our panels come standard with a 1.5" border. If you cut the panel yourself, you will lose that border from the side you cut. You can use a U-Channel to finish that edge, however, we do offer custom size options. If you are interested, contact us at 706-678-2387.

If your railings are wood, you can use regular deck or wood screws.

We do privacy screens a lot. If you have the proper supports for the 1/4" panels they will hold up very well. We do recommend a support every 16-24".