PN Series Solid Polycarbonate Sheet Door Awning (47 in. W x 31 in. D) in White Bracket

This model has 6061-T3 grade aluminum bars.

Hello, thank you for your interest in Advaning awnings. All of our Advaning Door Awnings come with a solid polycarbonate canopy panel that is fabricated from 100% Bayer virgin raw material. Many brands use lesser grade recycled materials that often have impurities mixed in. However, our PN and PA Series comes with a solid polycarbonate panel that is virtually unbreakable and have superior strength and durability over the conventional hollow panels. I hope this answers your questions. Please feel free to contact us again if you have any further questions. Sincerely, Yaritza R. ADVANING

Thank you for your interest in Advaning awnings. The PN Series come with 2 width, 47 inches and 55 inches. You may connect multiple PN Series units together to extend the width. The PA Series come with 59 inches width only. Please see below for the awning dimension. http://www.advaning.com/kcfinder/upload/files/manual_literature/Advaning_door_awning_Dimensions.pdf Please feel free to contact us if we can be of any further assistance. Thank you. Best, Wendy Advaning Awnings

It is supposed to hold up to 200 lbs. So, I don't know how much a foot weighs, but since it is curved, I don't think the whole snow load will sit on it anyway.

Hello and thanks for your interest and inquiry. I understand you may want to customize the size of the PN series polycarbonate sheet by cutting it, however, I must apologize to inform that because the sheet fits directly into the bracket, it should not be attempted. Cutting polycarbonate requires a specific blade and table to support the size - in addition, altering the product will void the warranty. I hope this information helps with your decision, please feel free to contact Advaning directly should you need additional assistance. Best, Chris L. Advaning

Hello, Thank you for your Inquiry! Unfortunately, I apologize to inform that our polycarbonate panels cannot be cut for a customized length. Please feel free to contact us directly for any additional questions you may have or visit our shop site for questions regarding available sizes. Best, Yaritza R. ADVANING Awnings

Hello, The weight capacity of our 47"x31" PN series door awning is 200 lbs. You may find our Intertek testing results of all our door awning in the following link: http://www.advaning.com/kcfinder/upload/files/DoorAwning_Technical_Information.pdf We recommend that the end user periodically clears the snow off of the door awning to prevent any excessive build up of weight. Please feel free to direct contact us should you have any additional questions. Best, Allison W.

No, the 47-inch wide awning will not mount the support.

Hello and thank you for your interest and inquiry. I understand you may want to install our PN series solid polycarbonate awning onto a hollow brick/block and want to confirm that we have had customers install our products onto hollow brick/block with appropriate hardware not supplied by Advaning. We always recommend that you consult with a professional contractor, hardware professional or handyman who can provide you with the best recommendations for these installs. I hope this fully answers your question, please feel free to reach out directly in case you need anything else, we are always happy to help. Best, Chris L. ADVANING

Hello and thanks for your question - Yes all PN series can be installed onto stucco. You will need to locate studs for a secure connection and will need silicone to seal the connection if your stucco surface is textured. Hope this helps, thanks - Advaning