Air King's DRLC702 decorative exhaust fans with light provide stylish and effective ventilation for your bathroom or powder room. A nickel finish complements most decors. The moonstone glass light lens evenly disperses light throughout the room. The unit utilizes two 60W maximum incandescent bulbs or two 15W LED bulbs (bulbs not included). The effective 70 CFM motor is permanently lubricated for years of worry free operation. All functions can be wired to operate separately. The unit easily installs using the included adjustable hanging brackets or integrated mounting tabs and the 4″ round plastic duct connector with damper protects against backdrafts. Perfect for use in smaller bathrooms and powder rooms.
Decorative exhaust fan and light combination
Easily installs using the included adjustable hanging brackets
Frosted, ribbed glass light dome disperses light evenly throughout the room
Round grill makes it easier to center the unit within the room
Up to 120-Watt of lighting with two 60-Watt maximum standard bulbs (bulbs not included)
4 in. round connector with plastic damper protects against back drafts and ensures quiet operation
Light and fan can be wired to operate together or separately
For bathrooms up to 70 sq. ft. for other rooms up to 85 sq. ft.
Meets the America requirements of the American Recovery and Reinvestment Act (ARRA) as a manufactured good
Q:what size light bulbs? are they normal size like what screws into your living room lamp or are they small?
by|Feb 5, 2023
1 Answer
Answer This Question
A:Â Regular-sized bulbs.
by|Jul 7, 2023
Q:How does the light/fan base attach to the motor box?
by|Jan 2, 2023
0 Answer
Answer This Question
Q:Can I get replacement motor for this exhaust fan
by|Oct 4, 2022
0 Answer
Answer This Question
Q:CAN THIS FAN AND LIGHT BE INSTALLED ON A SINGLE DIMMER SWITCH
by|Jan 30, 2022
2 Answers
Answer This Question
A:Â The light could be put on a dimmer, the motor should not be on a dimmer. They can be wired separate, but if you tie them together to work off of 1 switch, it would be best to be a switch, not a dimmer!
by|Jul 7, 2023
2 found this answer helpful
A:Â Yes, it can be installed on a single switch. I personally prefer a timer for the fan, just to not burn the motor out should it remain on.
by|May 5, 2022
Showing 1-4 of 49
Customer Reviews
4.1 out of 5
(215)
4.1
out of 215 reviews
76% recommend this product
5
115
4
48
3
15
2
13
1
24
Filter by:
Showing 1-10 of 215 reviews
Aug 3, 2018
Nice looking light with powerful [louder] fan. Works well and adds warmth, appeal and functionali...
Nice looking light with powerful [louder] fan. Works well and adds warmth, appeal and functionality. This is the second one we purchased for our home. Not sure if we missed something during the installation, but we couldn't find a way to drop the assembly to allow for strapping (1x3 lumber for attaching ceiling drywall) so that the fan assembly would be flush with the drywall surface. Also, I suppose we could have cut a circle in the ceiling drywall, but we just cut a square to match the fan assembly. Reason I mention this is because taller people can see the square cutout through the slots on the light fixture. I suppose we could also paint the portion of the ceiling under the light a darker color. None of this was really a big deal or a showstopper, but worth mentioning.
by
Verified Purchase
Recommended
1 found this review helpful
Mar 13, 2018
Fan is louder than our previous, but more powerful . The metal housing was smaller than previous,...
Fan is louder than our previous, but more powerful . The metal housing was smaller than previous, which meant some additional steps to replace, had to add a block to the ceiling joist. no big deal .The round light cover Just barley covers the square hole in the drywall from the previous install, but it does cover . Nice looking fan, Wife loves it.
by
Verified Purchase
Recommended
Feb 13, 2018
Great looking fixture for the cost compared to a traditional white exhaust fan. Performs well and...
Great looking fixture for the cost compared to a traditional white exhaust fan. Performs well and installed two of these and we are extremely satisfied with the performance and look.
by
Verified Purchase
Recommended
Feb 6, 2018
Looks great, it is a little noisy but quieter than my previous fan.
Looks great, it is a little noisy but quieter than my previous fan.
by
Verified Purchase
Recommended
Jan 30, 2018
Very easy to install and wire, works and looks great in my bathroom.
Very easy to install and wire, works and looks great in my bathroom.
by
Verified Purchase
Recommended
Oct 1, 2015
Overall, a good fan/light combo unit.
A very good unit. My only complaint was the plastic duct adapter(Collar) flap(Damper) was broke. A simple chat with Home Depot and I had its replacement in a few days. Home Depot is service is top notch, this is why I do all my shopping here.
Install tip:
This unit's fan box was smaller than my previous one, so the hole in my ceiling was too large. As seen in picture, the over sized hole is barely visible. I centered the new unit, then used 1x boards to fill in the gaps, on the attic side, of course. Then caulked every hole and seam, from the attic side. If I did not do this it would have pulled air from attic, instead of the bathroom.
I will be buying am identical unit for other bathroom.
by
DIY
Recommended
2 found this review helpful
Oct 11, 2023
by
Oct 11, 2023
works well but a bear to install
There are so many issues on installation. I suggest read the the instructions well before installing. The screws for fastening the light are barely long enough if the edge of the fan box are not about a half inch below ceiling. Yo pretty much going to be aligning the screw to the hole blind. Heads of the screws are smaller than the hole, so they slip through even with the provided space for wires is very good luck if you have big hands.
by
Sep 13, 2023
by
Verified Purchase
Jun 23, 2023
Great option for powder room where we wanted to match existing fixture color at a very good price.
The NuTone Ventilation Fan with Light features square lens surrounded by a decorative white grille that coordinates with the most popular ceiling white paints. This design features a single E26 standard light socket, allowing for flexibility to choose an A19 bulb that works best for the room and lighting preference. Powerful 80 CFM airflow effectively clears the air of humidity, odor and airborne particulates and helps prevent mold and mildew.
Update your bathroom with this Homewerks bath fan with LED light. The integrated LED light delivers 1000 lumens and provides more light for the room. Featuring a no-cut design and 80 CFM airflow, this bath fan is easy to install and can power through humidity in bathrooms up to 80 sq. ft. The simple white grille was designed to blend in with most ceilings. The corrosion resistant, galvanized steel housing is built to withstand moisture and will keep your bath fan operating year after year. Quietly remove humidity with the 1.1 sones sound level. Dim the light for the desired brightness in the room. Bring additional lighting and a sleek design to your room with the ventilation exhaust fan with LED light from Homewerks.
Homewerks ventilation fan with an integrated Bluetooth-enabled speaker and LED light. Perfect for the Tech-savvy homeowner with a desire to stream audio from their Smartphone or tablets into their bathroom. Since the Bluetooth speaker is integrated directly into the bath fan wiring there is no need to re-charge the speaker.
Whether you're doing a full remodel, looking to brighten up your space, or just replacing an old exhaust fan, Hunter's designer-inspired bath fans with lighting are sure to add a touch of brilliance and style to your bathroom. ETL listed for safe use over your shower enclosure or bathtub, our collection features a variety of contemporary and modern looks, suitable to match a wide range of home decor themes. The Victorian (81021) features a traditional chrome and porcelain design with cased white glass enclosure for 2 bulbs. The fan motor and light fixtures can be wired to the same switch or independently, depending on your preference for your convenience. The glass cover is easily removed and replaced with a secure, screwless design for simple re-lamping and cleaning. All hardware is included for an easy installation.